• Journal of the Korean Professional Engineers Association
• /
• v.42 no.6
• /
• pp.47-52
• /
• 2009

According to increasing demand of water mainly due to the growth of population and increased water consumption, many countries either face or worry about the shortage of fresh water. Proportionately, importance and efforts of each country to develop the potable water has been gradually increasing as well. Among others, desalination of seawater has been developed to one of the solutions mainly from the middle east and other arid regions to produce large quantity of fresh water from seawater. We installed beach seawater collector wells to develop the filtered seawater supply for desalination in a refinery. We came to a conclusion that the beach seawater collector well is one of the recommendable alternatives of seawater pre-treatment for desalination applications with lower operating cost and higher efficiency.

• Korean Journal of Veterinary Service
• /
• v.22 no.4
• /
• pp.357-361
• /
• 1999

The most harmful nitrogenous compounds in fish-breeding place using are ammonia and nitrate. Excessively high total nitrogen concentration is the signal of unbalance for breeding fishes in seawater and may result overfeeding or overstocking without seawater treatment system. The failure of elimination for the organic ingredients or nitrogen compounds can also cause the consequence of inadequate oxygen concentration in seawater, either. The study shows the effect of biofilter and W disinfector of seawater in the fish- breeding place. In the results, these tools had ammonia, nitrite, nitrate and decreased 71.8%, 27.6% and 1%, respectively, and the total number of microorganisms decreased up to 81.9%.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.5
• /
• pp.534-539
• /
• 2013

To secure the biological safety of live fish and shellfish for raw consumption, the germicidal effects of electrolyzed seawater were evaluated. Upon direct exposure to electrolyzed seawater, coliform group bacteria were killed and decreased to undetectable levels after 1 day. The physicochemical characteristics of the seawater were stable during the test period. A byproduct of chlorine disinfection, trihalomethane, was not generated by the electrolysis of seawater. Vibrio parahaemolyticus infection in a live fish was effectively resolved by electrolyzed seawater and became undetectable after 12-36 h of treatment. Bioaccumulation of coliform group and fecal coliform bacteria in live oysters Crassostrea gigas was removed within 18 h of treatment. This study demonstrated that electrolyzed seawater is an effective and safe germicidal agent for the traditional retail market and can help to prevent outbreaks of foodborne disease associated with the consumption of raw fish and shellfish.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.1
• /
• pp.9-17
• /
• 2016

Disinfectant/oxidation process is a crucial process in water treatment for supplying safe drinking water. Chlorination is still widely used for water treatment area due to its effectiveness on microbial inactivation and economic feasibility. Recently, disinfection concern in marine environment is increasing, for example, movement of hazardous marine organism due to ballast water, marine environmental degradation due to power plant cooling water discharge, and increase of the amount of disinfectant in the offshore plant. It is needed to conduct the assessment of disinfectant behavior and the development of disinfectant prediction model in seawater. The appropriate prediction model for disinfectant behavior is not yet provided. The objective of the study is to develop chlorine decay model in seawater. Various model types were applied to develop the seawater chlorine decay model, such as first order decay model, EPA model, and two-phase model. The model simulation indicated that chlorine decay in seawater is influenced by both organic and inorganic matter in seawater. While inorganic matter has a negative correlation with the chlorine decay, organic matter has a positive correlation with the chlorine decay.

• Journal of Korean Society on Water Environment
• /
• v.37 no.6
• /
• pp.442-448
• /
• 2021

Seawater desalination is a technology through which salt and other constituents are removed from seawater to produce fresh water. While a significant amount of fresh water is produced, the desalination process is limited by the generation of concentrated brine with a higher salinity than seawater; this imposes environmental and economic problems. In this study, characteristics of seawater from three different locations in South Korea were analyzed to evaluate the feasibility of crystallization to seawater desalination. Organic and inorganic substances participating in crystal formation during concentration were identified. Then, prediction and economic feasibility analysis were conducted on the actual water flux and obtainable salt resources (i.e. Na2SO4) using membrane distillation and energy-saving crystallizer based on multi-stage flash (MSF-Cr). The seawater showed a rather low salinity (29.9~34.4 g/L) and different composition ratios depending on the location. At high concentrations, it was possible to observe the participation of dissolved organic matter and various ionic substances in crystalization. When crystallized, materials capable of forming various crystals are expected. However, it seems that different salt concentrations should be considered for each location. When the model developed using the Aspen Plus modular was applied in Korean seawater conditions, relatively high economic feasibility was confirmed in the MSF-Cr. The results of this study will help solve the environmental and economic problems of concentrated brine from seawater desalination.

• Journal of fish pathology
• /
• v.33 no.1
• /
• pp.91-95
• /
• 2020

Fish bacterial diseases have spread and caused serious problem for cultured marine fish in Korea. The important bacterial disease affecting mariculture such as olive flounder (Paralichthys olivaceus) are caused by Edwardsiella tarda, Vibrio scophthalmi and Streptococcus parauberis. For the bacterial disease protection in aquaculture industry, the water treatment is needed in aquaculture system. During the last decades atmospheric pressure non-thermal plasma in contact with liquids have received a lot of attention of environmental and medical application. In this study, we determined the disinfectant effect in seawater and three major fish bacterial disease pathogens by using low frequency plasma treatment. Three fish bacteria (E. tarda, V. schophthalmi, S. parauberis) were not detected within 16 min, 150 min and 270 min of 20 L, 500 L and 1 ton seawater post low frequency plasma treatment, respectively. Three major fish bacterial disease pathogens were not detected within 2 min after the low frequency plasma treatment, suggesting that the low frequency plasma possess disinfectant effectiveness.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.05a
• /
• pp.205-209
• /
• 2003

The various pretreatment processes were evaluated for removal of oil pollutants with weathered oil contaminated seawater in a reverse osmosis desalination process. Weathered oil contaminated seawater was made by biodegradation and photooxidation with oil containing seawater. Coagulation, ultrafiltration, advanced oxidation processes and granular activated carbon filtration was used with pretreatment for dissolved organic carbon. Crude oil was removed but. weathered oil contaminated seawater was not removed by biodegradation and coagulation. DOC and E260 was removed with about 20 % and 40 % by membrane filter of cut off molecular weight 500. So, the most of dissolved organic carbon in weathered oil contaminated seawater was revealed that molecular weight was lower than 500. It is difficult to remove DOC in weathered oil contaminated seawater by advanced oxidation processes treatment, but, E260 was removed more high. However, DOC in weathered oil contaminated seawater was easily adsorbed to GAC. It is revealed that DOC was removed by adsorption.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.5
• /
• pp.536-541
• /
• 2015

Copper has been used extensively as an electric wire or as a base material in various types of machineries owing to its good electrical and thermal conductivity and good fabricating property, as well as its good corrosion resistance compared to iron. Furthermore, the copper-nickel alloy has significant corrosion resistance in severely corrosive environments. Although, cupro-nickel alloy shows better corrosion resistance than the brass and bronze series, this alloy also corroded in severely corrosive environments, including aggressive chloride ions, dissolved oxygen, and condition of fast flowing seawater. In this study, and annealing treatment at various annealing temperatures was carried out on the cupro-nickel (Cu-10%Ni) alloy, and the effects of annealing were investigated using electrochemical methods, such as measuring the polarization and impedance behaviors under flowing seawater conditions. The corrosion resistance increased by annealing compared to non heat treatment in the absence of flowing seawater. In particular, the sample annealed at $200^{\circ}C$ exhibited the best corrosion resistance. The impedance in the presence of flowing seawater showed higher values than in the absence of flowing seawater. Furthermore, the highest impedances was observed in the sample annealed at $800^{\circ}C$, irrespective of the present of flowing seawater. Consequently, the corrosion resistance of cupro-nickel (Cu-10%Ni) alloy in a severely corrosive environment can be improved somewhat by annealing.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.6
• /
• pp.908-913
• /
• 1998

The productivity of land based seawater fish farm has been decreased because of unexpected outbreaks of diseases caused by the contaminated inlet seawater. Sometimes unfiltered/untreated outlet seawater from the land based seawater fish farm has created serious environmental problem. In the needs of treatment systems for the inlet and outlet seawater, the researchers have developed two different systems, The purpose of this study is to design and test two treatment systems, the screen filter for inlet seawater and drum filter for outlet seawater, on the basis of concept of system design and automatization. After developing two systems, an experiment has been conducted with two systems and collected data to improve design and efficiency of the system. In this study, detailed design and efficiency of the system could be improved by the programmable logic controller (PLC).

• Environmental Engineering Research
• /
• v.16 no.4
• /
• pp.227-230
• /
• 2011

Seawater desalination technology is a complicated and expensive process. Besides salt removal from seawater, thesignificant problem that needs to be solved is boron removal. Boron removal is difficult so it is a considerable challenge for the desalination process. The main technology of this process is reverse osmosis (RO). RO can remove salt and boron more effectively than other technologies. In a conventional seawater desalination process, coagulant is utilized for pre-treatment but it is difficult to remove boron through this stage. In this study, a coagulant called Mineral Cluster was examined for boron removal. Therefore, Mineral Cluster can be considered a potential coagulant for boron removal in seawater desalination technology.