• 한국가구학회지
• /
• 제10권1호
• /
• pp.13-21
• /
• 1999

All chairs are uncomfortable in the long run and some chairs become uncomfortable more rapidly than others. In a particular chair, some people feel more uncomfortable than others. Comfort will depend upon the interaction of chair, user, and task characteristics. In this study, we intended to design a comfortable office chair by investigating anthropometric and biomechanical aspects for Koreans. We determine the design dimensions by analysis the anthropometric data. With these body parameters, we determined the design dimensions such as seat height, seat depth, seat width, seat backrest width, etc. This research, hopefully contributes to the development of ergonomic chair and improvement of the chair design technologies.

• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.395-402
• /
• 2005

Recently Multidisciplinary Design Optimization Based on Independent Subspaces (MDOIS), an MDO (multidisciplinary design optimization) algorithm, has been proposed. In this research, an MDO problem is defined for design of a belt integrated seat considering crashworthiness, and MDOIS is applied to solve the problem. The crash model consists of an airbag, a belt integrated seat (BIS), an energy absorbing steering system, and a safety belt. It is found that the current design problem has two disciplines - structural nonlin- ear analysis and occupant analysis. The interdisciplinary relationship between the disciplines is identified and is addressed in the system analysis step in MDOIS. Interdisciplinary variables are belt load and stiffness of the seat, which are determined in system analysis step. The belt load is passed to the structural analysis subspace and stiffness of the seat back frame to the occupant analysis subspace. Determined design vari- ables in each subspace are passed to the system analysis step. In this way, the design process iterates until the convergence criterion is satisfied. As a result of the design, the weight of the BIS and Head Injury Crite- rion (HIC) of an occupant are reduced with specified constraints satisfied at the same time. Since the system analysis cannot be formulated in an explicit form in the current example, an optimization problem is formu - lated to solve the system analysis. The results from MDOIS are discussed.

• 패션비즈니스
• /
• 제15권4호
• /
• pp.110-121
• /
• 2011

As car seat is the closest part between driver and rider, the interest of the security and comfort of the seat is increasing. This research discovered the best condition for dyeing and finishing to produce a fabric for car seat and also developed the design of fabrication to give the feeling from such a finishing. The best condition of coating finishing solution is aqueous PU 65%, dye resist reagent 20%, water 12%, thicker 3%, and knife thickness 2mm, tenter temperature $170^{\circ}C$, tenter speed 35yard/min, viscosity 12,000cps and stirring time 100kg * 30min. According to the processing time of knife coating upon stirring the change of resin and the uneven of coating quantity was shown. This problems will be solved by means of automatic temperature control apparatus for resin and sealing device through a coming research.

• 한국정보전자통신기술학회논문지
• /
• 제8권1호
• /
• pp.59-64
• /
• 2015

연구의 목적은 트랙터와 운전자의 인터페이스에서 중요한 연결고리인 트랙터 시트에 대한 인간공학적 설계인자의 도출이다. 대상 인구집단은 한국과 미국의 성인남녀이며 앉은엉덩이오금수평길이, 앉은어깨뼈높이, 앉은팔꿈치 높이 등 7종의 인체측정변수를 사용했다. 시트 설계 인자로는 좌석면의 크기, 등받이의 크기 및 팔걸이의 위치를 도출했다. 척주의 형태와 피복 효과 또한 고려되어야 하며, 본 연구의 결과가 소형 트랙터에 적용되는 시트의 설계 과정에서 가이드라인으로 활용되기를 기대한다.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.80-85
• /
• 2000

The hydroforming process is rapidly gaining popularity in the sheet metal forming industry. In this study, hydroforming process is applied to the seat back frame. The load-deformation characteristics of seat frame are simulated according to the test requirements by FMVSS. Structural analyses were performed with an analysis package program named I-DEAS for the conventional and the hydroforming seat back frame. The seat back frame made by hydroforming is not only about 23 percent lightweight, but also about 20 percent high strength compared with conventional that.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.45-50
• /
• 2014

In the previous paper, we have reported on the development of foaming sponge seat with the auxiliary spring member and suggested new possibility of the special seat with the auxiliary plastic member for movie theater chair. In this study, we have examined the major design parameters needed in the development of a foaming sponge seat in which the mesh type plastic member are inserted to improve the vibration transfer effect of a chair seat. Through analyzing several prototypes by applying experimentation as well as the experimental modal analysis method, it was confirmed that the effect of vibration transfer can be improved through the use of a mesh type plastic member and applied to the design of practical chair seat.

• 한국자동차공학회논문집
• /
• 제22권5호
• /
• pp.1-4
• /
• 2014

In recent years, requests for automotive seat comfort are increasing. An important issue of them is long-term seat comfort. Until now, the study for long-term seat comfort has been studied mainly using driver's questionnaire, changing adrenalin and electromyography. Actually the results and methodologies of them are difficult to apply to seat development and design because of money and time required. In this study, we developed Seating Feel Curve for seat comfort evaluation and a long-term seat comfort evaluation which can be applied to the development of seat comfort using seat support.

• 대한산업공학회지
• /
• 제41권1호
• /
• pp.74-78
• /
• 2015

A bus seat is required to be ergonomically designed in terms of its shape and physical properties to increase seating comfort. The present study is intended to develop a systematic bus seat evaluation protocol based on seating comfort. A total of 48 participants evaluated 12 parts (seat belt, recliner, armrest, headrest, upper-back support, lumbar support, seatback bolster, seatback overall, hip support, thigh support, seatpan bolster, and seatpan overall) of 12 bus seats with 17 subjective comfort measures (e.g., convenience of control, suitability of size, and overall comfort). Lastly, ergonomic features of shape and physical properties of each seat part were identified based on the subject evaluation analysis results. The developed bus seat evaluation protocol can be applied to evaluate various types of seats.

• 한국융합학회논문지
• /
• 제9권8호
• /
• pp.155-160
• /
• 2018

자동차 시트는 주행시 운전자의 편의와 안전을 제공하는 하나의 부품이다. 최근 그 시트는 의자와 같은 용도 외에 외부의 충격이나 진동으로부터 운전자를 보호하고 편의를 주는 역할을 하고 있다. 자동차의 충돌 안전성 및 내구성과 같이 시트 프레임의 구조적인 기능에 대한 설계가 중요하다. 본 연구에서는 시트 프레임의 구조적인 안전성과 내구성을 높이기 위하여 시트 백 프레임 부분에 환봉을 1개씩 증가하여 시트를 설계하였다. 설계 및 해석 프로그램으로는 CATIA와 ANSYS를 사용하여 본 연구를 수행하였다. 구조해석과 진동해석을 통한 본 연구 결과로서는 Model 4가 타 모델 대비 더 뛰어난 내구성을 가지는 것을 알 수 있었다. 이 결과를 이용함으로서 구조적인 안전성과 내구성을 가진 자동차 시트 프레임 설계를 할 때에 유용한 자료가 될 것이라고 사료되며, 자동차 시트 프레임의 디자인을 융합기술에 접목하여 미적 감각을 나타낼 수 있다.

• Tribology and Lubricants
• /
• 제35권3호
• /
• pp.183-189
• /
• 2019

The driver seat of an automobile is in direct contact with the driver and provides the driver with a safe and comfortable ride. The seat consists of a frame, a rail, and many recliners. In recent years, strength and operating force measurement testing of the recliner have become vital for designing car seats. However, performance evaluation requires expensive testing equipment, numerous seat products, and considerable time. Therefore, the trend is to reduce experimentation through interpretation. This study examines the lubrication of solid lubricant for automotive seat recliners and confirms the friction and wear performance. In this study, the lubrication behavior of solid lubricants for car seat recliners is investigated to ascertain the friction and wear performance and to provide accurate values for the strength analysis. The friction material consists of a pin and a plate made from steel, which is widely used in recliners. The friction and wear under lubrication conditions are measured by a reciprocating friction wear tester. The friction coefficient is obtained according to the load and speed. Based on the obtained results, it is possible to achieve a reduction in the error of the test value and the analysis by providing the friction coefficient and wear of the lubricant. The results can be applied to the analysis of automobile seat design.