• International Journal of Internet, Broadcasting and Communication
• /
• 제15권1호
• /
• pp.140-144
• /
• 2023

In recent years, there are so many serious crashes involving coaches, especially the frontal collision occupies 40% of the front of the vehicle, Frontal collisions account for 100% of the front of the vehicle affecting the driver and side-impact collisions that injure the person in the vehicle. Therefore, the research into improving and optimizing the structure is necessary for risk of injury for passengers in frontal accidents. In this paper, we have designed a Shock absorber that can absorb collision energy. Research using HYPERMESH software. to build the finite element model and calculate the meshing to suit the mesh size of 5mm. apply LS-DYNA software to calculate structural strength. In the study, for a vehicle to collide with a hard obstacle occupying 100% of the head of the vehicle. Then, the experimental design method, Minitab is used for find the structural parameters in the design. Improvement results showed that the acceleration of the impact on passengers and the driver is decreased by 55,17%. The mass of texture improvements is reduced by 11%, according to the requirements of European Standards ECE R94.

• Journal of Biosystems Engineering
• /
• 제33권4호
• /
• pp.224-229
• /
• 2008

This study was aimed to minimize the impact force and vibration transmitted to the transporting materials from the trailer and wheel shaft by installing the leaf spring suspension device at the space between the wheel shaft and frame of power tiller trailer. The developed trailer equipped with leaf spring suspension device was compared to the existing trailer without suspension device, in order to identify the vibration absorption effect of the leaf spring. The results of this study could be summarized as follows; (1) The length and the maximum bending amount of the leaf spring were designed as 1,000 mm and 42 mm, respectively, considering the possible space for installing at below the trailer. When 4 leaf springs were installed on both wheel shafts, the allowable maximum load was identified as 9,418 N. (2) The average vibration accelerations for the frequency less than 20 Hz, where the severe transporting loss could be represented, were $0.017\;m/s^2$ and $0.133\;m/s^2$ for the developed and the existing trailer, respectively, showing the vibration absorption effect of about 87%. And the average vibration accelerations on the driver's seat for the frequency less than 20 Hz were $0.01\;m/s^2$ and $0.20\;m/s^2$ for the developed and the existing trailer, respectively, which showed the similar vibration absorption effect. (3) The change of the average vibration accelerations for the frequency from 20 Hz to 80 Hz showed the similar tendency with the result for the frequency less than 20 Hz, but the effect for developed trailer was reduced slightly. And the effect of vibration absorption for the above 80 Hz was reduced highly. However, by installing the leaf spring suspension device at the trailer, the low frequency below 40 Hz, which could affect on transporting loss severely, could be reduced highly. (4) The maximum vibration acceleration for the frequency less than 20 Hz were $0.027\;m/s^2$ and $1.267\;m/s^2$ for the developed and the existing trailer, respectively. And the change of maximum acceleration between 20 Hz and 120 Hz was showed similar tendency with the result for the frequency less than 20 Hz, but the width of change was reduced highly.

• 디지털콘텐츠학회 논문지
• /
• 제19권8호
• /
• pp.1585-1592
• /
• 2018

휠체어에 대한 균형을 맞추지 못하는 체중 배분으로 인해 기존의 휠체어 시스템은 휠체어가 언덕으로 올라갈 때 뒤집히거나 떨어질 위험에 직면합니다. 이 논문에서는 휠체어를 타는 동안보다 안전하기 위해 통합 된 자이로 센서와 틸트 센서를 사용하여 균형을 제어하는 실시간 새 솔루션을 제안했습니다. 휠체어의 전형적인 특성은 발을 움직이는 데 어려움을 겪는 특수 사용자를위한 것이기 때문에 휠체어 시스템의 균형을 유지하는 것이 중요하고 도움이되었습니다. 우리의 방법에서는 경사 센서의 정보를 이용하여 시트 각을 계산한다. 그러나 휠체어가 움직이는 관성의 법칙으로 인해 틸트 센서의 출력 값에 편차가 있습니다. 따라서 자이로 센서의 출력 인 가속도를 이용하여 각도 값을 최적화해야합니다. Gyro 센서와 Tilt 센서의 조합을 사용하여 이점을 얻었습니다. 또한 전체 시스템의 소비 문제도 해결했습니다. ZigBee 센서 모듈을 사용하여 다양한 실험을 통해 밸런싱 시스템의 전력 소비가 크게 줄어 들었습니다.

• 드라이브 ㆍ 컨트롤
• /
• 제13권2호
• /
• pp.10-18
• /
• 2016

A front-end loader (FEL) mounted on an agricultural tractor is one of the most commonly used implements to mechanize routine agricultural tasks. When the FEL is used with a loaded bucket, careful operation is required to maintain safety and avoid spillage when the tractor passes a bump because a change in the gravity center of the tractor due to varied loadings can affect the stability of the tractor. Use of a boom suspension system consisting of accumulators and orifice dampers can be instrumental in reducing pitching vibrations while increasing the handling performance of the FEL-mounted tractor. The objective of this research was to reduce bump shocks by adding an orifice and a flow control valve to the original hydraulic circuit composed solely of accumulators. A simulation study was performed using the SimulationX program to investigate the effects of an accumulator and an orifice-throttle damper on bump shocks. Results showed that the peak pressure on a boom cylinder and the vertical acceleration of a bucket were significantly affected by use of both an accumulator and an orifice damper. In a field test conducted with a 75-kW tractor, the peak pressure of the boom cylinder, and the root mean square (RMS) vertical acceleration of the bucket and seat were reduced by on average, 23.0, 42.2, and 44.9% respectively, as compared to those measured with the original accumulator system, showing that an improved design for the accumulator hydraulic circuit can reduce bump shocks. Further studies are needed to design a tractor suspension system that includes the effects of cabin suspension and tires as well as dynamic analysis.

• 재활복지공학회논문지
• /
• 제10권2호
• /
• pp.133-139
• /
• 2016

전동휠체어는 장애인들이 편리하게 이동할 수 있는 이동수단이다. 하지만 전동휠체어를 사용하다가 전복되는 사고가 매년 증가하고 있다. 현재 전동휠체어 관련한 KS P 7176 규격에는 동적안전성 시험항목이 있지만 이는 전동휠체어의 안전성을 확보하지 못하였다. 본 연구에서는 새롭게 개발한 장애인 차량에 적재 가능한 접이식 전동휠체어를 소개하고 본 휠체어를 기본으로 주행 중 동적 전도해석 기법에 관한 내용을 소개하고자 한다. 전도해석은 force-moment 안정성 측정법을 사용하였으며 회전반경, 가속도, 무게중심점에 대한 영향을 평가하였다. 본 해석 방법으로 전동휠체어의 안정성을 확보할 수 있으며 동적 안정성 평가 항목 개발에 기초자료로 제공할 수 있다.

• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.108-114
• /
• 2010

The injection nozzle of an electro-hydraulic injector is being opened and closed by movement of a injector's needle which is balanced by pressure at the nozzle seat and at the needle control chamber, at the opposite end of the needle. In this study, the effects of needle movement in a piezo-driven injector on unsteady cavitating flows behavior inside nozzle were investigated by cavitation numerical model based on the Eulerian-Lagrangian approach. Aimed at simulating the 3-D two-phase flow behavior, the three dimensional geometry model along the central cross-section regarding of one injection hole with real design data of a piezo-driven diesel injector has been used to simulate the cavitating flows for injection time by at fully transient simulation with cavitation model. The cavitation model incorporates many of the fundamental physical processes assumed to take place in cavitating flows. The simulations performed were both fully transient and 'pseudo' steady state, even if under steady state boundary conditions. As this research results, we found that it could analyze the effect the pressure drop to the sudden acceleration of fuel, which is due to the fastest response of needle, on the degree of cavitation existed in piezo-driven injector nozzle.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.297-302
• /
• 2007

Vibrating test of vehicle component can be possible in lab-based simulators instead of field testing owing to the development of technology in control algorithm as well as computational process. Currently, Multi-Axial Simulation Table(MAST) is recommended as a vibrating equipment, which excites a target component for 3-directional translation and rotation motion simultaneously and hence, vibrational condition can be fully approximated to that of real road test. But, the vibration-free performance of target component is not guaranteed with MAST system, which is only simulator subjective to the operator. Rather, the reliability of multi-axial vibration test is dependent on the quality of input profile which should cover the required severity of vibrating condition on target component. In this paper, multi-axial vibration testing methodology of vehicle component is presented here, from data acquisition of vehicle accelerations to the obtaining the input profile of MAST using severe data at proving ground. To compare the severity of vibration condition, between real road test and proving ground one, energy principle of equivalent damage is proposed to calculate energy matrices of acceleration data and then, it is determined the optimal combination of special events on proving ground which is equivalent to real road test at the aspects of vibration fatigue using sequential searching optimal algorithm. To explain the vibration methodology clearly, seat and door component of vehicle are selected as a example.

• 한국항공우주학회지
• /
• 제41권9호
• /
• pp.740-746
• /
• 2013

항공기, 자동차를 포함하는 모든 수송수단 설계에 있어서 내추락성 설계가 강조되고 있으나, 심각한 부상 또는 사망으로 이어지는 사고는 지속적으로 발생해 왔고, 앞으로도 발생할 것이다. 심지어 생존 가능으로 분류되는 사고에서조차도 상당한 수준의 인명사고가 있어 왔음은 주지의 사실이다. 그러나 이러한 사고들이 반드시 불가피하다고만 할 수는 없다. 만약 좌석, 구속장치, 탑승공간 강도조건 등 탑승자 보호계통이 적절히 또는 바르게 설계된다면 추락상황에서의 생존성은 획기적으로 증대될 수 있다. 이를 위해서는 급격한 가속도 변화환경에서의 인체 허용한도 특성을 충분히 이해해야 하며, 이를 바탕으로 인체 허용한도 제한치 이내에서 하중조건이 유지되도록 탑승공간을 설계하여야 한다. 본 논문에서는 급격한 가속도 변화환경에서의 인체 허용한도의 중요성과 예측되는 추락환경 변화에 따른 설계요구도 변화 필요성을 강조함으로써 내추락성 설계에 대한 공감대를 넓히고자 한다.

• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.967-975
• /
• 2010

There have been a lot of efforts on the improvement for the ride comfort and handling stability of the combat vehicles. Especially most of vehicles for military purpose have bad inertial condition and severe operating condition such as the rough road driving, and need a high mobility in the emergency status. It is necessary to apply the controlled suspension system in order to improve the vehicle mobile stability and ride comfort ability of crews. A feasibility study is performed on the application of the semi-active suspension system with a magneto-rheological controlled shock absorber for a $6{\times}6$ combat vehicle. First, the dynamic simulation model of the vehicle including the control model for the semi-active suspension system was executed. Based on this model, a hardware-in-the-loop simulation(HILS) system which has a semi-active suspension controller hardware was constructed. After full vehicle simulations were performed in virtual proving courses with this system, the semi-active suspension system was proven to give better ride comfort and handling stability in comparison with the conventional passive suspension system.

• 한국항공우주학회지
• /
• 제40권12호
• /
• pp.1070-1079
• /
• 2012

항공기 사고 시 항공기 구조물의 충돌에너지 흡수 특성은 탑승자 생존성 향상을 위해 매우 중요한 요소이다. 일반적으로 항공기의 비상착륙 시 충돌에너지는 착륙장치, 동체 하부 구조물(Subfloor), 좌석을 통해 탑승자에게 흡수/전달되며, 이 세 가지 구성품은 항공기 내추락성에 매우 중요한 구성품이다. 이 구성품들 중 동체 하부 구조물의 충돌 에너지 흡수 특성은 항공기 형식, 구조물의 형태 및 적용된 재료에 따라 결정된다. 따라서 항공기 동체 하부 구조물의 내추락 특성에 관한 연구는 항공기 안전성 향상을 위해 매우 중요한 분야이다. 본 연구에서는 상대적으로 내추락 특성이 취약한 80~90 인승급 리저널항공기 Narrow Body 동체의 내추락 유한요소 모델 구성과 외연적 유한요소해석을 통한 내추락 해석이 수행되었다. 동체 구조의 충돌에너지 흡수 및 좌석 장착점의 가속도 응답 등의 해석 결과 분석을 통해, 내추락 특성 및 성능 평가 과정을 수행하였다.