Engine oil is an oil used for lubrication of various internal combustion engines. The main function is to reduce wear on moving parts; it also cleans, inhibits corrosion, improves sealing, and cools the engine by carrying heat away from moving parts. In engines, there are parts which move against each other. Otherwise, the friction wastes the useful power by converting the kinetic energy to heat. Those parts were worn away, which could lead to lower efficiency and degradation of the engine. It increases fuel consumption, decreases power output, and can induce the engine failure. This study was conducted to evaluate the relation between engine oil property changes and engine performance for the diesel engine. This test was performed by using 12L, 6 cylinder, heavy duty engines. Low SAPS 10W30 engine oil (two type engine oils) was used. Test procedure and method was in accordance with the modified CEC L-57-T97 (OM441LA) method. In this study, TAN, TBN, KV and metal components, engine power, blowby gas, A_F were presented to evaluate the relation with engine oil property changes and engine performance. TAN, TBN, KV and metal We found that the components were generally increased but engine performance did not change. This results mean that property changes did not affect on engine performance because those were not enough to affect engine performance.
Canals with artificially made internal resorption were filled with 4 techniques(Lateral condensation, Ultrafil, Obtura II, Thermafil) to compare the efficacy of canal filling according to the filling techniques. After canal filling, radiographic examination, dye penetration through the apical portion and percentage of G-P filled area on the internal resorption area were evaluated. To examine the degree of crystal-like structure and the interface between filled G-P and canal wall, SM and SEM images were taken too. The results were as follows : 1. There was no statistically significant difference in apical microleakage among the 4 root canal filling techniques. 2. As a result of radiographic examination, Ultrafil was the best and Obtura II was acceptable but Lateral condensation and Thermafil showed unfavorable canal filling pattern similarly. 3. Ultrafil filled most of artificially made internal resorption area and Obtura II, Lateral condensation, Thermafil in that order filled unfavorably. 4. Degree of crystal like structure was the highest in the group filled with Ultrafil and those of Obtura II and Thermafil were similar and that of gutta percha used in Lateral condensation showed the lowest value. 5. Penetration of gutta percha into the dentinal tubules couldn't be seen in all groups. In the contact surface between the filled G-P and the canal wall, Lateral condensation showed relatively close sealing, Obtura II and Thermafil had irregular contact surface and Ultrafil showed regular filling pattern. 6. Contact surface between the core of Thermafil and the gutta percha showed close relationship without gap formation.
본 연구에서는 반도체 소자 생산 공정 중 발생하는 오염입자에 의해 실시간 오염입자 측정장치인 In-Situ Particle Monitor(ISPM)의 광학창의 오염을 방지하기 위한 모듈 개발에 관한 연구이다. 개발한 광학창 오염방지 모듈은 실시간으로 측정하는 ISPM 내 광학창 표면에 오염입자가 흡착되는 것을 방지하기 위한 장치로 적합한 초음파 모듈 개발이 성공적 연구의 핵심내용이다. 또한 그 효과를 극대화하기 위한 구조적인 최적화도 필요하지만 초음파 힘의 표면 전달효율 향상 기술도 개발이 필요한 핵심 기술이다. 개발된 광학창 오염방지 모듈이 장착된 ISPM은 양산용 증착공정 장비(BPSG 증착장비) 배기구에 설치되었으며, 공정조건 별 오염방지 모듈의 성능과 더불어 ISPM 측정 효율도 함께 검증하였다.
Sealing of leakage in waterfront or water-retaining structures is one of the major issues in geotechnical engineering practices. With demands for biological methods as sustainable ground improvement techniques, bioclogging, defined as the reduction in hydraulic conductivity of soils caused by microbial activities, has been considered as an alternative to the chemical grout techniques for its economic advantages and eco-friendliness of microbial by-products. This study investigated the feasibility of bioaugmentation and biostimulation methods to induce fermentation-based bioclogging effect in coarse sands. In the bioaugmentation experiments, effects of various parameters and conditions, including grain size, pH, and biogenic gas generation, on hydraulic conductivity reduction were examined through a series of column experiments while Leuconostoc mesenteroides, which produce an insoluble biopolymer called dextran, was used as the model bacteria. The column test results demonstrate that the accumulation of bacterial biopolymer can readily reduce the hydraulic conductivity by three-to-four orders of magnitudes or by 99.9-99.99% in well-controlled environments. In the biostimulation experiments, two inoculums of indigenous soil bacteria sampled from waterfront embankments were prepared and their bioclogging efficiency was examined. With one inoculum containing species capable of fermentation and biopolymer production, the hydraulic conductivity reduction by two orders of magnitude was achieved, however, no clogging was found with the other inoculum. This implies that presence of indigenous species capable of biopolymer production and their population, if any, play a key role in causing bioclogging, because of competition with other indigenous bacteria. The presented results provide fundamental insights into the bacterial biopolymer formation mechanism, its effect on soil permeability, and potential of engineering bacterial clogging in subsurface.
Complex geological conditions have a great influence on the mining of coalbed methane (CBM), which affects the extraction efficiency of CBM. This investigation analyzed the complicated geological conditions in the Liujia CBM block of Fuxin. A geological model of heterogeneities CBM reservoirs was established to study the influence of strike direction of igneous rocks and fault structures on horizontal well layout. Subsequently, the dual-porosity and dual-permeability mathematical model was established, which considers the dynamic changes of porosity and permeability caused by gas adsorption, desorption, pressure change. The results show that the production curve is in good agreement with the actual by considering gas seepage in matrix pores in the model. Complicated geological structures affect the pressure expansion of horizontal wells, especially, the closer to the fault structure, the more significant the effect, the slower the pressure drop, and the smaller the desorption area. When the wellbore extends to the fault, the pressure expansion is blocked by the fault and the productivity is reduced. In the study area, the optimal distance to the fault is 70 m. When the horizontal wellbore is perpendicular to the direction of coal seam igneous rock, the productivity is higher than that of parallel igneous rock, and the horizontal well bore should be perpendicular to the cleat direction. However, the well length is limited due to the dense distribution of igneous rocks in the Liujia CBM block. Therefore, the horizontal well pumping in the study area should be arranged along the direction of igneous rock and parallel plane cleats. It is found that the larger the area surrounded by igneous rock, the more favorable the productivity. In summary, the reasonable layout of horizontal wells should make full use of the advantages of igneous rock, faults and other complex geological conditions to achieve the goal of high and stable production.
Purpose: TThe experiment was designed to compare the efficiency of ventilation between conventional BVM ventilation and a newly devised A-BVM ventilation method with Tidal volume, total ventilation rate, average Ventilation speed, and average Ventilation volume. Methods: 40 Paramedical students who agreed to participate in the study were analyzed. Values were measured using IMB PASS after 2 minutes of Brayden Pro manikin with BVM and A-BVM ventilation. The difference in general characteristics was assessed by t-test and ANOVA and the difference in ventilation methods was analyzed by IBM SPSS. Results: A significant difference was found between the two ventilation methods in terms of tidal volume (t=-11.203, p<.001), ventilation time (t=-3.834, p<.001), and optimum ventilation probability (t=10.770, p<.001). A-BVM ventilation method, rather than BVM ventilation method, showed a value close to the appropriate amount recommended by Korean Advanced Life Support (500~600mL) in tidal volume, and higher in optimum ventilation probability. Conclusion: We could identify the a better mode of ventilation. Further studies on the efficacy of existing BVM ventilation methods as compared to device augmented BVM ventilation methods should be carried out to ensure that adequate ventilation is available to patients in clinical practice.
최근에는 차집관거의 확충, 생활하수의 유입량 증가 및 인근 신규 APT의 분뇨 직유입으로 인해 유입 총고형 물량이 증가됨에 따라 기존 소화조의 용량이 부족할 것으로 예상되고 있다. 본 연구는 기존 소화조 용량부족에 따른 효율감소에 대응하기 위해 미생물제재로써 Bio-dh를 이용하여 소화조내 소화효율 증가(유기물 분해속도 증가)에 따른 최종슬러지 발생량을 감소시키고 가스발생량을 증가시키는데 그 목적이 있다. 실제 하수슬러지를 처리하고 있는 소화조 장치와 동일한 2단혐기성소화조 형태로 설치하였으며, 용량이 $1.3m^3$인 혼합조에 하수슬러지와 미생물제재인 Bio-dh를 주입하였다. 소화방식은 중온성 2단혐기성소화조로서 $35{\pm}1^{\circ}C$를 유지하였고, 1단소화조는 반응조내 미생물과 기질의 원활한 혼합을 위하여 교반기를 부착하였으며, 교반기는 120rpm으로 운전하여 반응조내 완전혼합이 이루어지도록 운전하였다. 2단소화조에서는 소화슬러지와 상등수가 분리되도록 교반을 수행하지 않았다. 소화가스량 측정을 위하여 각 소화조 상부에 가스메타를 설치하였으며, 가스분석을 위하여 상부에 가스포집구를 설치하였다. 교반기 축사이로 발생할 수 있는 발생가스의 누출과 공기의 유입을 막기 위해 water sealing 장치를 교반기 축에 부착시켰다. 실험결과 다음과 같은 결론을 얻을 수 있었다. 1. 미생물제재를 투입하지 않은 경우 소화효율은 평균 48.6%(46.0~50.9%)로 나타난 반면, 미생물제재인 Bio-dh를 투입한 경우 소화효율은 평균 54.2%(52.8~57.3%)로 나타나 미생물제재를 투입한 경우가 미생물제재를 투입하지 않은 경우보다 소화효율이 약 1.12배 정도 높은 것으로 나타났다. 2. 2차소화조 월류수의 수질은 미생물제재 미투입시 $COD_{Mn}$은 평균 1,639mg/L, SS는 평균 4,888mg/L로 나타난 반면, 미생물제재(Bio-dh) 투입시 $COD_{Mn}$은 평균 859mg/L, SS는 평균 2,405mg/L로 나타나 미생물제재 투입시 $COD_{Mn}$은 약 47.6%, SS는 약 50.8% 정도 더 낮게 나타났다.
최근 강화된 환경규제 및 높은 연비에 대한 요구로 인해 천연가스를 연료로 사용하는 선박이 증가하고 있다. 친환경 선박 연료로 대두되고 있는 LPG 혹은 메탄올을 사용한 선박의 요구도 증가하고 있다. 이러한 흐름의 연장선상으로 LPG 혹은 메탄올을 사용하는 ME-LGI 엔진에 대한 연구가 최근 활발히 이루어지고 있다. ME-LGI 엔진을 탑재한 선박은, 선박 항해 중 연료분사밸브의 작동 신뢰도를 지속적인 테스트를 통해 확인해야할 필요가 있다. 따라서 연료분사밸브 테스터의 개발은 ME-LGI 엔진의 상용화를 위해 반드시 필요하다. 이에 본 연구에서는 요구조건 분석, 기능분석, 설계 합성의 순서로 진행되는 시스템 엔지니어링 프로세스를 활용하여 ME-LGI 엔진용 연료분사밸브 테스터의 개념설계를 수행하였다. 요구조건 분석 단계에서 먼저 연료분사밸브의 작동 프로세스를 분석하였고, 밀폐 오일 누유 여부 확인의 필요성을 도출하였다. 그 다음 기능분석 단계에서 연료분사밸브 테스터의 기능 및 기능의 흐름을 수준별로 정의하였다. 이후 설계 합성 단계에서 각 기능에 해당하는 장비들을 설정하였고, 이를 바탕으로 process block diagram을 도출하였다. 또한 시스템 분석 및 조정 단계의 일환으로 초기위험도 분석을 수행하여 안전 방안을 개념설계 안에 추가하였다. 본 연구는 시스템 엔지니어링 프로세스가 개념설계에 적용되는 과정을 상세히 보여줌으로써 향후 타 시스템의 개념 설계 시 좋은 참고자료가 될 수 있을 것으로 기대된다.
Oral health projects that cater to the disabled should be more prevailing in order to ensure the maintenance and successful promotion of the oral health of disabled people. 70 public dental clinics that conducted oral health projects geared toward the disabled were examined to get a precise grip on their oral health projects. The findings of the study were as follows: 1. 31 out of 70 public dental clinics investigated(44.3%) were equipped with two or more dental hygienists who were professional human resources in charge of the oral health projects for the disabled. As for the age and disability type of the beneficiaries of the oral health projects, adolescents(74.3%) and people with mental retardation(87.1%) benefited most from the oral health projects. Concerning the most common implementation frequency of the projects, the projects were carried out once to three times a week(62.9%). 2. The most dominant oral disease treatment provided to disabled people was amalgam treatment and resin treatment(68.6%), which were the early dental caries treatment. The most common preventive treatment that was offered to improve their oral health was oral prophylaxis(82.9%). As for reform measures for the oral health projects, education of personnels in charge of the projects and their specialization(58.6%) were most emphasized. 3. Regarding factors related to the preventive oral health projects for the disabled, the implementation of oral prophylaxis and toothbrushing education was linked to the age of the beneficiaries. More oral prophylaxis was offered to teens, and more toothbrushing education was provided to preschoolers and adolescents. The age of the beneficiaries and the number of dental hygienists responsible for the projects had something to do with the application of fluorides. 4. Concerning the relationship of the preventive oral health projects for the disabled to the number of dental hygienists, one of the personnels in charge of the projects, the application of fluorides( 54.4%) and pit & fissure sealing(56.8%) were more prevalent when there were two or more dental hygienists. There was a statistically significant disparity in that regard(p<0.05). The above-mentioned findings illustrated that in order to boost the oral health of the disabled, dental hygienists who are responsible for the oral health projects for the disabled should put ceaseless efforts into fostering their professional knowledge and ability and offering quality service to disabled patients. Every public dental clinic should be equipped with plenty of professional personnels to enlarge the scope of treatment and ensure the efficiency of treatment and the preventive projects.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.