• Design & Manufacturing
• /
• 제15권1호
• /
• pp.32-40
• /
• 2021

Mold design for in-mold coating was carried out to achieve simultaneous injection molding and two-color coating for car gas cap cover. The developed mold includes one core and three cavities which are composed of a substrate cavity and two coating cavities. To provide a sealing edge for complete seal during the second coating, the first coated material was used at the boundary between the first coating and the second one, and injection molded substrate was used at the parting line. The materials used were PC/ABS for substrate and 2-component Polyurea for coating. Through experiments, it was found that the suggested sealing edges were effective for complete seal during the second coating. In cavity pressure traces, there were three peaks caused by mold closing, coating-material injection and cleaning-piston advancement inside the mixing head. The cavity pressure increased with decreasing coating thickness.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.652-655
• /
• 2004

In these days, repair materials for leakage cannot help but being taken in temporary way without any noticeable countermeasure. This kind of repair is socially criticized many times that is defective construction even if tills costs a lot. It was not arrange the standard for performance evaluation test method and quality maintenance for materials, even it has been used various injection repairing agent. In conclusion, We suggest that the test method for repair materials for leakage to establish the leakage repairing technology as increase of structure demand, so that the necessity of the establishment of the quality control standard and the performance testing way on the relevant water-proof seal is increasing a lot to regulate the water-proof technology and the leakage repair technology.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1996년도 제24회 추계학술대회
• /
• pp.158-162
• /
• 1996

A split shaft device is commonly used to measure the radial force of lip seals. The radial force measured with this device includes some inevitable error. This error is caused by the fact that the split shafts cannot maintain a perfect circle when the interference becomes larger or smaller than some initial interference. In this study, a theoretical model for the calculation of the radial contact force has been carried out, and an explicit equation for the measurement error as a function of the initial interference and the interference to be measured has been obtained. The error when the interference is small is not dependent upon the material properties and the shape of the lip seal, but rather upon the amplitude of the initial interference and the interference to be measured. When the interference is larger or smaller than the initial interference, the measured contact force is always underestimated or overestimated.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1559-1566
• /
• 1994

Using the finite element method, the contact force, contact band width and temperature distribution of lip seals analyzed for the interference including some nonlinearities such as material nonlinearity, geometrical nonlinearity and nonlinear contact boundary condition. The calculated results showed that the contact stress concentrated on the contact zone between the garter spring and the rubber toward the flex side, the contact edge of lip seals. The high contact forces due to the increased interference separate the sealing gap between the lip edge and the rotating shaft. This may lead to leak the sealed oil.

• Restorative Dentistry and Endodontics
• /
• 제32권5호
• /
• pp.419-425
• /
• 2007

본 연구의 목적은 세 가지 레진계 근관충전실러 (AH 26, EZ fill, AD Seal), 산화아연 유지놀계 근관충전실러(ZOB Seal) 그리고 수산화칼슘계 근관충전실러 (Sealapex)의 방사선 불투과성 및 세포독성을 평가한 것이다. 각 실러를 제조회사의 지시대로 혼합하여 직경 10 mm, 두께 1 mm로 시편을 제작한 후 ISO 6876/2001의 규격에 따라 교합필름을 이용하여 알루미늄 스텝웨지와 함께 방사선 촬영을 시행하였다. 방사선 사진을 디지털화하여 컴퓨터에 저장한 후 Scion image 프로그램을 이용하여 각 단계의 알루미늄 스텝웨지의 두께와 비교하였다. 각 재료의 세포 독성은 불멸화된 인간 치주인대세포 (immortalized human periodontal ligament cell, IPDL)에서 MTT 분석법을 이용하여 시행하였다. EZ fill이 가장 높은 방사선 불투과성을 나타내었고 Sealapex가 가장 낮은 방사선 불투과성을 나타내었다 (p < 0.05). AH 26, AD Seal, ZOB Seal은 중등도의 방사선 불투과성을 나타내었다. Sealapex를 제외한 모든 평가된 재료는 ISO 규격에 부합하는 방사선 불투과성을 보였다. 레진계 실러의 세포독성은 모든 실험 시간대에 걸쳐 다른 계통의 실러에 비해 낮게 나타났다 (p < 0.05) 아울러, EZ fill은 24및 48시간대에서는 AD Seal에 비해, 72 시간대에서는 다른 두 레진계 실러에 비해 높은 세포독성을 보였다. 그러나 레진계 실러에서 방사선 불투과성의 정도와 세포독성과의 관련성은 없었다 (p > 0.05). 이 실험 결과로 볼 때 레진계 실러는 다른 계통의 실러에 비해 방사선 불투과성 면에서 장점을 가지며 생체적합성면에서 우수하다고 사료된다.

• 공업화학
• /
• 제22권4호
• /
• pp.395-399
• /
• 2011

리튬 이온 전지에 사용되는 개스킷 재료는 내전해액성, 전기 절연성, 압축 영구 줄음률, 비오염성, 저온성이 요구된다. 개스킷 고무에 적용되는 가교조제의 영향을 살펴보기 위하여 리튬 이온 전지에 있어 대표적 용매인 propylene carbonate에서 용해도 지수의 차가 큰 ethylene propylene diene monomer (EPDM)에 금속산화물인 가교조제의 함량을 조정하여 compound를 배합하였다. 이렇게 배합된 compound를 리튬 이온 전지의 작동환경을 고려하여 전해액에 대한 장기평가 및 압축 영구 줄음률, 저온성에 대한 평가를 실시하였다. 본 실험에서는 다양한 가교조제를 사용하여 가교조제에 따른 고무재료의 물리적 화학적 특성 및 리튬 이온 전지에의 영향에 대하여 검토하였다. 가교조제로 ZnO를 사용한 고무에서 1000 h까지의 공기 노화 시험 및 전해액의 대표 유기용매인 propylene carbonate 침적시험에 대해 안정적인 물성을 얻을 수 있었으나, 이온 용출성 평가에서는 $Zn^{2+}$가 용출되기 때문에 리튬 이온 전지용 개스킷에 적용되는 고무 배합에서는 ZnO 사용을 제한하여야 한다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권1호
• /
• pp.1-5
• /
• 2018

콘크리트 구조물이 점차 대형화, 고층화됨에 따라 지하구조물이 증가하고 있으며 지하실, 지하상가, 지하주차장, 지하철 등 그 종류 또한 다양해지고 있다. 이에 따라 지하구조물에 사용된 방수공법으로는 아스팔트계, 가황고무계, 점착형 시트재 등의 시트계 방수재를 이용한 외 방수공법을 주로 사용하였으나, 조인트 부분, 균열 발생 시 방수층의 파단 등 시트 방수공법의 문제점이 나타나 최근 방수층이나 외벽방수의 품질 확보와 구조물 거동에 대한 하자 발생률을 줄이고자 아스팔트 씰과 아스팔트 방수시트를 복합으로 사용하는 복합공법이 널리 사용되어 지고 있다. 그러나 일부 민간 건설 현장에서 아스팔트 씰의 누유현장으로 매스컴에 오르내리면서 아스팔트 씰의 적정품질 확보가 중요시되는 시점이다. 이에 본 연구에서는 국내에서 사용되고 있는 아스팔트 씰계 제품을 대상으로 옥외 수직부 흘러내림 특성을 평가하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1823-1826
• /
• 2002

The purpose of this experiment was to develope Triggered Vacuum Switch (TVS) for the high voltage and high current. The TVS has an array of rods of alternate polarity in which a fixed gap spacing is maintained between the rods. The cross section of each rod has trapezoidal shape. It consists of electrode, ceramic chamber, getter and trigger. Currently, triggered vacuum switch (TVS) with seal-off has been designed and fabricated at PAL. An experimentation and trigger devices for TVS were designed for testing characteristics of electricity. For making the prototype of TVS, it is developed of fabrication process and fined of electrode material. The fabrication of the TVS is a lot of process which have manufacturing of part, chemical clean, ceramic brazing and metal welding. The fabricated TVS is tested of leak for vacuum, hold-off voltage and conditioning of trigger system. The TVS has pinch-off after it is removed of gas in the TVS and activated of getter in degassing furnace. The prototype TVS tested about 20 kV, 75 kA, 83 ${\mu}s$ with 100 kJ capacitor bank and inductance 5 ${\mu}H$. This paper describes the results of tests and the characteristics of the switch.

• 한국식생활문화학회지
• /
• 제32권5호
• /
• pp.453-464
• /
• 2017

Vegetable soup has been reported to have anti-inflammatory, anti-oxidative and anti-cancer effects. In this study, five kinds of vegetable soup were developed using a new manufacturing process and compositional changes in raw material, and anti-cancer and immuno-stimulatory activities were evaluated. Cytotoxicity tests based on MTT assay revealed that all vegetable soups had strong inhibitory effects against CT26 mouse colon cancer cells, with soups including Solomon's seal being most effective based on comparison of $IC_{50}$ values. Apoptosis in response to vegetable soup was occurred by 3-5 fold on cancer cells compared to normal cells. Mouse splenocytes increased by 266-541% in response to addition of vegetable soup in an in vitro proliferation experiment. In co-culture with splenocytes and CT26 cancer cells, splenocytes increased by more than 280% in every vegetable soup treatment, while cancer cells decreased by about 60% and cytokines such as $IFN- {\gamma}$ and IL-12 were secreted from splenocytes in high levels only in response to vegetable soup including Solomon's seal. In conclusion, all vegetable soups developed in this study had anti-cancer effects, and vegetable soup including Solomon's seal showed the strongest anti-cancer and immuno-stimulatory effects. These results suggest that functionality of vegetable soup could be increased by changes in manufacturing processes and raw materials composition.

• 한국안전학회지
• /
• 제33권4호
• /
• pp.90-97
• /
• 2018

As the result(also after it's been carried out the damping force test with 800ea lateral dampers of 50ea trainset from entering heavy maintenance workshop to implement heavy maintenance inspection cycle, there were 86.25%(650ea) which were out of $350kg{\pm}15%$ of the standard value of damping force compared to the reference value. After the implementation of heavy maintenance inspection cycle, it's been examined damping force test with total samples 32ea(samples 8ea per a trainset) from actual running EMU 4ea trainset. As the result, percent defective was 84.4%(27ea), which was a very high level. System. The lateral damper's the failure cause of damping force defective was oil leakage caused by tearing crack of oil seal and foreign material in oil iron 473 ~ 1932 times higher than that of new oil, copper 36 ~ 98 times higher than that of new oil reduced oil amount cycling damping valve. It resulted from the change cause of damping force. In the static analysis on the shape of lateral damper oil seal's the existing and improved product, the stress of the improved product was smaller than that of the existing product. In the fatigue analysis, the existing product showed a low life in the upper area. However, in case of the improved product, it could be confirmed that the destruction did not occur up to the specified 1.0e + 006 cycles and the lifetime was further improved in most areas.