• 한국해양공학회지
• /
• 제29권5호
• /
• pp.373-379
• /
• 2015

Side Scan Sonar (SSS) is capable of acquiring real-time data for seabed scouring, bathymetry, mine countermeasurement, etc. In a shipyard, an SSS package is utilized to measure the water depth and find debris in the sea because a sufficient water depth and non-interruption have to be ensured before implementing an underwater installation such as a large thruster. This paper presents the application and operation method of an SSS for the construction of an offshore project.

• International Journal of Ocean System Engineering
• /
• 제1권4호
• /
• pp.198-204
• /
• 2011

Recently, several problems have occurred in the space, infra-structure, and facility of the contiguity of existing harbors due to the trend of enlarged container vessels. In this regard, the Mobile Harbor has been proposed conceptually in this study as an effective solution for these problems. The concept is that of a transfer loader that transfers containers from a large container ship to the harbor on land, and is a catamaran type floating barge. The catamaran-type vessel is well known for its advantage in maneuverability, resistance, and effectiveness for working on board. For the safe and effective operation of the two floating bodies (a container ship and the mobile harbor in the near sea detached from the quay), robot arms, novel crane systems, and pneumatic fenders are specially devised with an additional mooring facility or DP (dynamic positioning) system. In this study, this concept is to be verified through comparison and simulation studies under various environmental conditions. It is shown that the proposed concept is in general feasible but there are several areas for further investigation and improvement.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1702-1714
• /
• 1998

Removal of spilled oil over the sea and the river has become one of the urgent problems in these days. Removing oil using mechanical devices was recommended because chemical dispersion could cause the secondary contamination in the environment. In the present study a series of experiments were carried out to study the effect of operating conditions, especially, the angle between the belt and the fluid surface on the rate of recovery for the spilled oil using a belt skimmer. Three different types of operation, namely, upward pickup, downward pickup and up-and-downward pickup situations have been investigated for various contact angles, belt speeds and oil thicknesses to find the effects on the recovery rate. The highest rate of oil recovery was found in the case of a contact angle of $45^{\circ}$ and downward pickup. Furthermore, an optimal belt speed was found to reach the saturated recovery rate for a given oil thickness.

• The Journal of the Acoustical Society of Korea
• /
• 제24권2E호
• /
• pp.46-53
• /
• 2005

Agency for Defense Development (ADD) developed the Submarine Acoustic Information Management System (SAIMS Version 1.0) capable of interfacing some submarine sensors in operation and predicting detection environments for sonars. The major design concepts are as follows: 1) A proper acoustic model is examined and optimized to cover wide spectra of frequency ranges for both active and passive sonars. 2) Interfacing the submarine sensors to an electric navigation chart, the system attempts to maximize the applicability of the information produced. 3) The state-of-the-art database in large area is built and managed on the system. 4) An algorithm, which is able to estimate a full sound speed profile from the limited oceanographic data, is developed and employed on the system. This paper briefly describes design concepts and algorithms embedded in the SAIMS. The applicability of the SAIMS was verified through three sea experiments in October 2003-February 2004.

• 한국항해항만학회지
• /
• 제36권9호
• /
• pp.715-720
• /
• 2012

This paper is to introduce the development of a LCD monitor-based pilots' ship handling simulator installed in the office of Korea Maritime Pilots Association. This simulator is composed of hardware which includes working server array, operation PC, monitor array, rudder, thruster and telegraph peripheral devices, and software which includes ship mathematical model software, ship conning software, image supporting software and so on. In this simulator, MMG mathematical model is used to create thirteen(13) ship models, which are based on sea trial data & pilots' opinion. According to requirements of pilots, virtual scenes of different port areas are built, and some required additional functions are also developed. By using this simulator, pilots can fulfill all kinds of training exercises, design of channel approaching ports, traffic safety analysis, prevention of accident research and other tasks, so as to grasp the characteristics of different ships, and accumulate experience for piloting.

• 한국항해항만학회지
• /
• 제31권5호
• /
• pp.339-344
• /
• 2007

항주파는 해안침식, 호안 결괴, 하역곤란 및 어선 등 소형선박의 동요를 발생시키며, 최근에는 고속으로 항행하는 수상오토바이, 모터보트 및 여객선 등이 수영객, 낚시꾼 및 어로작업중인 어민에게 위협이 되고 있다. 본 연구에서는 실험 및 이론적으로 항주파고의 전파특성을 검토하였으며 상대수심이 얕은 수역에서 발생한 항주파가 천해역으로 전파하는 경우 파고증가율이 커지며, 수심이 얕을수록 유속이 느린 흐름이 존재하여도 파가 진행하지 못함을 알 수 있다.

• Ocean and Polar Research
• /
• 제24권3호
• /
• pp.207-213
• /
• 2002

We have analyzed sea surface temperature and salinity data collected in the western Pacific Ocean by using an automated Thermosalinograph (TSG) installed on the RV Onnuri during May - June of 2001. The TSG data exhibit characteristics of water masses distributed in the near surface layer of the cruise area very well. Especially, they reveal the diurnal surface temperature cycle and the effect of rainfall on temperature and salinity in the equatorial region, showing the effectiveness of the use of TSG. Problems to be improved for the better TSG operation are the method of water sampling and calibration of TSG sensors. Installation of a pressure gauge in the TSG system and periodical sensor calibration are strongly recommended to ensure reliability of data.

• 수산해양기술연구
• /
• 제50권2호
• /
• pp.176-184
• /
• 2014

Nowadays, consumption of fisheries products is increasing. There are several factors, one of which is a quantitative development through aquaculture. Another factor is an increase qualitative consumption of fish which require that fish be supplied alive. This requires a lot of technical effort to transport the live fish that have low survival rate (c.f. tuna and mackerel) in coastal waters and in the open sea. To develop a towing cage for transporting the live fish, model test in a circulate water channel and simulation by computer tool were carried out. In order to spread vertically, floats were attached at the upper part of the cage, and iron chains attached at the lower part of the cage. For horizontal spreading, kites were attached on the cage. The tension and spreading performance of the cage were measured. The result shows that the tension and reduction ratio of inside volume of the cage were tended to increase with increased towing speeds. The suitable operation condition in towing cage was 1.0 m/s towing speeds with vertical spreading force 8.7 kN, horizontal spreading force 5.6 kN; in this case the reduction ratio of inside volume of the cage was estimated as 25%.

• KIEAE Journal
• /
• 제8권1호
• /
• pp.19-24
• /
• 2008

The wind-power among the new and renewable energies uses the wind, a limitless, clean and pure energy which is available at any place. It requires low installation cost compared to the generation of other renewable energies, and is easy to operate, and furthermore, can be automated for operation. Korea has been taking a great deal of interest in the development of renewable energy generating equipment, specifically wind power generation as the nation has a nearly total reliance on imported petroleum. A measuring poll 30m high was installed at a location with an altitude of 142m above the sea level in order to measure and analyze the wind power potentiality at H University's Asan Campus, and the wind velocity and wind direction were measured for 1 year. As for the wind power resource of the area adjacent to Asan campus, the Weibull Distribution coefficient was C=2.68, K =1.29 at H30m. Weibull Distribution coefficient was modified on the basis of compensated wind velocity (=3.1m/s) at H 60m, and the energy density was $42W/m^2$. AEP 223,750 KWh was forecast based on the simulation of an 800KW grade wind turbine. It is considered that the wind power generation has to be studied further in the inland zone with low wind velocity to cope with the possible exhaustion of fossil fuel and ensure a sustainable environmental preservation.

• 한국항해항만학회지
• /
• 제34권2호
• /
• pp.145-152
• /
• 2010

The management of safety at sea is based on a set of internationally accepted regulations and codes, governing or guiding the design and operation of ships. The regulations most directly concerned with human safety and protection of the environment are, in general, agreed internationally through the International Maritime Organization(IMO). IMO has continuously dealt with safety problems and, recognized that the human element is a key factor in both safety and pollution prevention issues(IMO, 2010). This paper proposes a human error analysis methodology which is based on the human error taxonomy and theories (SHELL model, GEMS model and etc.) that were discussed in the IMO guidelines for the investigation of human factors in marine casualties and incidents. In this paper, a cognitive process model, a human error analysis technique and a marine accident causal chains focused on human factors are discussed, and towing vessel collision accidents are analyzed as a case study in order to examine the applicability of the human error analysis technique to marine accidents. Also human errors related to those towing vessel collision accidents and their underlying factors are discussed in detail.