• 한국전산구조공학회논문집
• /
• 제24권3호
• /
• pp.289-294
• /
• 2011

본 논문에서는 유한요소모델을 사용하여 원자력 발전용 해수여과장치에 대한 동적 내진해석을 수행하였다. 장치의 검증을 위해서 운전기준지진(Operating Basis Earthquake, OBE)과 안전정지지진(Safe Shutdown Earthquake, SSE)이 설계하중으로 작용하였을 때 부재에 미치는 영향을 평가하였다. 해석대상은 유한요소법을 사용하여 수학적 모델링을 완성하였고, 층응답스펙트럼(Floor Response Spectrum, FRS)에 따른 지진하중과 사하중 등을 적용하여 해석을 수행하였다. 해석된 해수여과장치의 최대변위는 OBE 조건에서 2.5mm이고, SSE 조건에서 최대변위는 4.6mm이다. 최대응력은 OBE 조건에서 24MPa, SSE 조건에서 44MPa이며, 이 값은 재료의 항복강도의 각각 18%, 27% 수준이다. 이에 따라 지진하중 조건에 따른 해수여과장치의 구조적 안전성이 제시되었다.

• 대한기계학회논문집A
• /
• 제27권3호
• /
• pp.363-371
• /
• 2003

This study is mainly concerned with phenomenon of cavitation-erosion on the several materials and corrosive liquids which were applied with vibrator(suggested by ASTM G 32, 20KHz, 50$mu extrm{m}$). The maximum erosion rate by cavitation erosion in both of distilled water and sea water appeared to be proportioned to their hardness and tensile strength. Cavitation weight loss and rate of cast iron in sea water condition were greater(approximately 3 times) than that in distilled water condition, however in case of stainless steel and brass the cavitation weight loss of composite materials were not so different in both of their conditions. Cavitation weight loss of composite materials were shown as below on this test, Duratough DL : Weight loss in sea-water condition were greater (approximately 2.3 times) than it's distilled water condition. The main tendency of cavitation erosion for metals appeared that small damaged holes causing by cavitation erosion was observed with radial pattern. On the other hand, the tendency for composites appeared that small damaged holes were observed randomly.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.227-233
• /
• 1999

This study is mainly concerned with phenomenon of cavitation-erosion on the several materials and corrosive liquids which were applied with vibrator (suggested by ASTM G-32, 20KHZ, 24{$mu}m$).The main results obtained are summarized as follows ; (1) The maximum erosion rate by cavitation erosion in both of fresh-water and sea-water appeared to be proportioned to their hardness and tensile strength. (2) Cavitation weight loss and rate of cast iron in sea-water condition were greater (approximately 3 times) than that in distilled-water condition, however in case of stainless and brass the cavitation weight loss and their rates were not so different in both of their conditions. (3) Cavitation weight loss of composite materials were shown as below on this test, DuraTough DL : Weight loss in sea-water condition were greater (approximately 2.3 times) than it's fresh-water condition. (4) As the result of observation with digital camea of specimens, the main tendency of cavitation erosion for metals, was that small damaged holes causing by cavitation e개sion was appeared with radial pattern, and composites materials was that small damaged holes were appeared randomly.

• 한국소음진동공학회논문집
• /
• 제22권7호
• /
• pp.599-604
• /
• 2012

In this study, the safety of the driving gear reducer of ESW(essential service water) traveling sea water screen was evaluated through seismic analysis. Mode analysis of gear reducer was performed for reliability of analysis. Seismic analysis was performed in operating basis earthquake(OBE) and safe shutdown earthquake(SSE), which were applied as design condition using floor response spectrum( FRS). The maximum strain of gear reducer under OBE and SSE were 20.4 ${\mu}$ and 33.6 ${\mu}$, respectively. The maximum stresses were 2.42 MPa under OBE condition and 4.36 MPa under SSE condition, which were smaller than the allowable strength of material.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.972-980
• /
• 2004

Cathodic protection is being widely used to protect steel structures in sea water environment, In order to protect steel structures completely, the flow condition of sea water surrounding with this structures and the surface condition of the structures must be considered for a desirable design of cathodic protection. In this study, the optimum protection potential and current density were investigated in terms of cathodic current density, surface condition and a flow condition of sea water. The optium protection potential of the cleaned specimen was -770 mV(SCE) and below. However in the case of the rusted specimen, its potential was -700 mV(SCE) and below, which was somewhat positive than the cleaned one irrespective of flow condition. The optimum cathodic protection current density for both the cleaned and rusted specimens was 100 mA/$\textrm{m}^2$, however, on the flow condition, 200 mA/$\textrm{m}^2$ to be supplied for cathodic protection of steel structures completely for both cleaned and rusted specimens.

• 한국지구과학회:학술대회논문집
• /
• 한국지구과학회 2010년도 춘계학술발표회 논문집
• /
• pp.134-134
• /
• 2010

Sea ices at the Tatarskiy Straitin the East/Japan Sea appear from November to April. Cold and fresh water, melted from the sea ices, may contain nutrients which are indispensable to spring bloom of phytoplankton and may provide a preferable condition to the spring bloom through changes in vertical structure of water column and stratification. Relation between the spring bloom along the Primorye coast and sea ices in the Tatarskiy Strait were investigated using multi-satellite multi-sensor data; ten-year SeaWiFS chlorophyll-a concentration data and PAR data, sea surface temperatures from NOAA/AVHRR, sea ice concentration and near-surface wind speed data from DMSP/SSMI, near-surface wind vectors from QuikSCAT, and others. We provided evidences of southwestward flowing cold water masses from sea ice and its relation of chlorophyll-a concentration. This study showed that year-to-year variations of chlorophyll-a concentration in spring were positively correlated with those of sea ice concentrations at the Tatarskiy Strait.

• 한국정보통신학회논문지
• /
• 제26권3호
• /
• pp.374-380
• /
• 2022

본 논문은 기계학습 기반의 LSTM(Long Short Term Memory) 알고리즘을 이용해 바다 양식장의 해수 상태 변화를 예측하는 연구 결과를 보여주고 있다. 바다 양식장의 해수 상태 정보를 수집하기 위해 용존산소량, 염도, 질소이온 농도 및 수온 측정 센서들을 사용해 하드웨어를 구현했으며, LoRa 통신을 이용해 클라우드 기반의 Firebase 데이터베이스로 전달해 저장하도록 구현하였다. 개발한 하드웨어를 이용해 통영과 거제 지역 양식장들 주변 해수 상태 정보들을 수집하였으며, 이들 실제 데이터셋을 사용한 학습 결과에다 LSTM 알고리즘을 적용하여 87%의 정확도를 보여주는 예측 결과를 얻어낼 수 있었다. 용존산소량을 비롯한 4가지 파라미터별 예측 결과를 사용자에게 제공하기 위해 Flask와 REST API를 사용했으며, 이러한 예측 결과는 어민들에게 바다 양식장의 해수 상태 변화를 미리 제공할 수 있어 어류 집단 폐사로 인한 큰 피해를 줄이는 데 도움이 될 것이라 기대한다.

• 한국농공학회논문집
• /
• 제55권2호
• /
• pp.1-8
• /
• 2013

This study was performed for the purpose of analyzing the effect of tide on the stress-strain behavior in the boundary surface of sea dike embankment. Tide is a dynamic condition, but there are not suitable numerical models to solve the dynamic embankment condition caused by tide. So the analysis was simplified to quasi dynamic as follow. First, seepage by tide was analyzed according to elapsed time, and the results of the analysis at every hour during one periodic cycle time of 12 hours were applied to the pore water pressure conditions of stress-strain analysis with hyperbolic model by Duncan and Chang. The place at which maximum shear strain took place in the analysis result moved up and down repeatedly along the boundary of the dredged sand fill section and the crashed stone filter section. The value of maximum shear strain was large at high water level of tide. This result means that contraction and relaxation occur in turn repeatedly at every specific position along the boundary, and the repeated action compact loose position with sand moved down from the upper position by gravity. The experiment with the small sea dike model showed the result consistent with the numerical analysis. The surface of sea side on the dike collapsed at high water level after a couple of repetition of the rising and falling of water.

• 한국지반공학회논문집
• /
• 제28권6호
• /
• pp.71-79
• /
• 2012

해안지역의 연약지반을 개량하기 위한 지반개량공법으로 가장 많이 사용되었던 모래다짐말뚝공법이나 사석치환공법은 최근 거의 사용되지 않으며, 대신 시멘트로 연약점토를 강제 교반시켜 고형화시키는 DCM(Deep Cement Mixing)공법이 많이 사용되고 있다. DCM공법이 주로 적용되는 해안지역에는 점토 이외에 모래와 같은 사질토도 존재하므로 본 연구에서는 해수에 포함된 염분과 양생방법이 시멘트로 고결된 모래의 일축압축강도에 어떤 영향을 미치는 지 연구하였다. 다섯 종류의 시멘트비를 사용하여 다짐방법으로 공시체를 제작한 다음 3일 동안 양생시켜 일축압축시험을 실시하였다. 혼합수로 해수 또는 증류수를 사용한 다음 해상에서 이루어지는 DCM공법을 고려하여 공시체를 해수에 수침시켜 양생하였다. 또한 육상조건과 비교하기 위하여 증류수로 수중양생하거나 대기중 양생도 실시하였다. 혼합수로 해수를 사용한 다음 구속압이 없는 상태로 해수에서 수중양생할 경우 공시체에 여러 균열이 발생하여 고결력이 발현되지 않았다. 시멘트비와 양생방법이 동일한 경우, 혼합수와 양생수로 해수를 사용한 공시체의 일축압축강도는 해수를 사용하지 않은 공시체보다 최대 3.5배 정도 낮게 나타났다. 또한 공시체의 수중양생 시 사용한 양생수보다는 공시체 제작 시 사용한 혼합수에 염분이 포함될 경우 강도 저하에 더 큰 영향을 미쳤다. 시멘트비가 동일한 경우, 사용한 물에 관계없이 대기중 양생한 공시체의 강도가 수중양생한 공시체보다 평균 2배 정도 높게 나타났다.

• 한국패류학회지
• /
• 제25권2호
• /
• pp.121-126
• /
• 2009

This study was performed to determine the effect of temperature condition on growth of juvenile abalone Haliotis discus hannai with the different feeds. Two types of feed (dry sea tangle and experimental diet) at water temperatures of 20 and $23^{\circ}C$, and 23 and $26^{\circ}C$ were applied to experimental abalone twice. Forty-five juvenile abalone averaging 10.1 g in the first feeding trial and 11.5 g in the second feeding trial were randomly stocked into 6 of 50 L plastic rectangular containers each. Fishmeal, soybean meal and shrimp head meal was used as the primary protein source in the experimental diet. And dextrin and wheat flour, and soybean oil were used as the primary carbohydrate and lipid sources in the experimental diet, respectively. The dry sea tangle and experimental diet were fed to abalone once a day at the ratio of 1.5-2.0% total biomass of abalone with a little leftover in each experimental condition. Weight gain of abalone was significantly affected by feed type, but not by water temperature in the first feeding trial. Regardless of water temperature, weight gain of abalone fed the experimental diet was significantly higher than that of abalone fed the dry sea tangle. However, weight gain of abalone was significantly affected by water temperature, but not by feed type in the second feeding trial. Weight gain was highest in abalone fed the experimental diet at $23^{\circ}C$, followed by abalone fed the dry sea tangle at $23^{\circ}C$, abalone fed the experimental diet and dry sea tangle at $26^{\circ}C$, which was lowest. Moisture and crude protein content of the edible portion of abalone was significantly affected by feed type, but not by water temperature in the second feeding trial. However, ash content of the edible portion of abalone was significantly affected by water temperature, but not by feed type. In considering these results, it can be concluded that the well formulated feed was superior to the dry sea tangle for growth of juvenile abalone, and water temperature conditions of 20 and $23^{\circ}C$ seemed to be better than $26^{\circ}C$ to improve weight gain of abalone.