• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.375-377
• /
• 2006

This paper presents a method to calculate generation power for integrating Sihwa tidal power into power systems. The sea levels of 1 minute interval using cubic interpolation based on the forecasted levels of high and low water offered from Nori(National Oceanographic Research Institute) are calculated. If the sea level is greater than the lake level and the difference between sea level and lake level at high tide is over the default value, it begins to calculate the tidal power. It is seen that tidal power can supply power to demand side stably and economically from assessment of effect for integrating tidal power into power systems.

• Ocean and Polar Research
• /
• 제28권3호
• /
• pp.273-285
• /
• 2006

As the political arguments on international power concept has gradually been deepened, the role of international regimes, defined as principles, norms, rules, and decision-making procedures around which nation-actors' expectations converge in a given issue-area, has also been reinforced. There are many ways of understanding about international regimes. In terms of realistic theories, international regimes are one of methods of maintaining hegemonic power order of hegemonic nation and in terms of liberalistic theories, international regimes are understood as the products of mutual inter-dependence of nations in changing international society. As a matter of fact, if we take structural causes and regime consequences into severe consideration, we can find not a few characteristics of international regimes, such as security regime, world trade and fiance regime, ocean regime, environmental regime, human right regime, etc. This paper will examine the changing concept of power after World War II in three categories of hard power (military power), meta power (regime creating power), and soft power (advanced in cultural, diplomatical, and technological power). This paper will provide the evidence of why the changing power concepts will be strongly related with the emergence of international regimes. The UN convention on the law of the sea will chosen as a standard case of the ocean regime and it's regime structure and role will also be analysed in both realistic :md liberalistic theories. Futhermore, the nations' interests involved in the UN convention on the law of the sea will be analytically classified and finally a future prospectus of the UN convention on the law of the sea as an ocean regime will be tested.

• 한국기계기술학회지
• /
• 제13권1호
• /
• pp.23-29
• /
• 2011

The measurement of ice properties such as thickness, strength are important to know the performance of the ice breaking vessel. The measuring equipment of ice properties and methods are summarized in this paper. The actual measured data are also described. The strength of ice at Svalbard area on April 2010 is much stronger than the Chukchi Sea on August 2010. The mean strength of Svalbard is about 500 kPa and one of Chukchi Sea is 250 kPa. The first sea trial in Arctic sea using Araon was carried out in the Chukchi Sea. The power and speed was also measured to check the ship performance in ice. The speed was measured from GPS(Global Positioning System) and engine power was recorded from DPS(Dynamic Positioning system) of Araon. The design target of Araon in level ice is 3 knots in 1m thickness and 630 kPa flexible strength but mean speed in Chuckchi sea is 3.98 knots when 6.6 MW engine power, 2.4m ice thickness and 250 kPa strength. This results comes from the difference of ice types and the weak flexible strength of ice but it will be a good information to know the performance of Araon in similar ice condition.

• 해양환경안전학회지
• /
• 제23권1호
• /
• pp.56-66
• /
• 2017

본 연구에서는 상선과 어선의 해기사, 해군의 함정장교 양성기관의 해기교육 시스템을 비교분석 함으로써 해양력 확보를 위한 해기교육 상황을 파악하였다. 분석결과 상선의 해기사 양성과정을 제외하고는 선박운영에 관한 교육과정이 상대적으로 낮은 비중을 차지하고 있었다. 선박운영에 필수적인 해기교육의 강화는 해양력 확보에 필수적이지만 인력공급이 어려운 선원직의 특수성이 교육과정에 반영된 것으로 보인다. 우수한 선원의 확보와 해기교육 문제를 해결하기 위해서는 국가차원의 관심과 지원방안이 마련되어야 할 것이다.

• 소음진동
• /
• 제9권6호
• /
• pp.1187-1192
• /
• 1999

The purpose of this study is to determine the most appropriate experimental method of the measurement of "damping loss factors" (DLF) for the statistical energy analysis(SEA) calculation. The successful prediction of vibration levels from the structure is critically dependent on the accurate estimation of DLF's not only in conventional vibration analysis but especially in SEA. Unforunately, calculation of accurate DLF is not an easy matter. So experimental methods are made use of for the DLF values. Three kinds of experimental methods for estimating DLF, i.e. decay rate method, half-power bandwidth method and power balance method, are presented and tests are carried out for the plate and the cylindrical shell examples. Pro and con of each methods is reviewed. Finally, calculated DLF values are used for vibration level estimation using commercial SEA software and compared with measured vibration data.tion data.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.545-550
• /
• 1997

It is well known that Statistical Energy Analysis(SEA) is one of very attractive analytical methods to solve shipboard noise problems. With reasonable successes, many applications of SEA to shipboard noise prediction have been reported. However when one wishes to obtain theoretical predictions by using SEA in practical systems, he will find difficulty in modeling of source systems, that is, foundations where to place main engine, generator, compressor, and so on. Also, he will find that it is hard to determine the amount of power flow from machinery to structures. In this paper, SEA of a simple foundation model was carried out using the estimated amount of power flow from source; the estimated mobility method. The comparison between the estimated and measured results is presented. That comparison shows a method to get structure-borne noise power from the combination of machinery and foundation. This prediction method gave a good results for a air-compressor mounted on a model foundation. The method is expected to give a reasonable power output in practical problems.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권3호
• /
• pp.208-215
• /
• 2011

A full-scale field trial in ice-covered sea is one of the most important tasks in the design of icebreaking ships. The first Korean icebreaking research vessel 'ARAON', after her delivery in late 2009, had a sea ice field trial in the Arctic Sea during July-August, 2010. This paper describes the test procedures and data analysis on the icebreaking performance of the IBRV ARAON. The data gathered from the icebreaking performance test in the Chukchi Sea and the Beaufort Sea during the Arctic voyage of ARAON includes the speed and engine power of the ship as well as sea ice thickness and strength data. The air temperature, wind speed and heading of the ship were also measured during each sea ice trial. The ARAON was designed to break 1 m thick level ice with a flexural strength of 630kPa at a continuous speed of 3knots. She is registered as a KR POLAR 10 class ship. The principal dimensions of ARAON are 110 m, 19 m and 6.8 m in length, breadth and draft respectively. She is equipped with four 3,500kW diesel-electric main engines and two Azipod type propulsion motors. Four sea ice trials were carried out to understand the relationship between the engine power and the ship speed, given the Arctic ice condition. The analysis shows that the ARAON was able to operate at 1.5knots in a 2.5m thick medium ice floe condition with the engine power of 5MW, and the speed reached 3.1 knots at the same ice floe condition when the power increased to 6.6MW. She showed a good performance of speed in medium ice floe compared to the speed performance in level ice. More detailed analysis is summarized in this paper.

• 한국수산과학회지
• /
• 제50권6호
• /
• pp.806-811
• /
• 2017

A multiplex PCR system comprising 14 microsatellite markers was developed for genotyping analysis of the sea cucumber Stichopus japonicus. A total of 286 samples were used to evaluate genetic polymorphisms and forensic parameters of the microsatellite loci. In a single PCR reaction, all 14 loci were uniformly amplified and a total of 269 alleles were identified. The AJ19024 locus had the largest number of alleles (46), and its discriminatory power and exclusion power were 0.99 and 0.76, respectively. The fewest alleles (8) were present at the Psj2575 locus, which provided the lowest discriminatory power (0.81) and exclusion power (0.20). The mean number of alleles, mean heterozygosity, mean discrimination power and mean exclusion power per locus were 19.21, 0.70, 0.93, and 0.46, respectively. The combined matching probability for the 14 loci was $9.64{\times}10^{-19}$, and the combined power of exclusion was 0.999995. Thus, the forensic parameters evaluated in the present study demonstrated the utility of our multiplex PCR system for biological tracing methods, such as individual identification and paternity testing, in the sea cucumber.

• 한국해양공학회지
• /
• 제34권6호
• /
• pp.454-460
• /
• 2020

In 2019, the Korean government announced the 3rd Basic Plan for Energy, which included expanding the rate of renewable energy generation by 30-40% by 2040. Hence, offshore wind power generation, which is relatively easy to construct in large areas, should be considered. The East Sea coast of Korea is a sea area where the depth reaches 50 m, which is deeper than the west coast, even though it is only 2.5 km away from the coastline. Therefore, for offshore wind power projects on the East Sea coast, a floating offshore wind power should be considered instead of a fixed one. In this study, a response analysis was performed by applying the analytical conditions of IEC61400-3-2 for the design of floating offshore wind power generation systems. In the newly revised IEC61400-3-2 international standard, design load cases to be considered in floating offshore wind power systems are specified. The upper structure applied to the numerical analysis was a 5-MW-class wind generator developed by the National Renewable Energy Laboratory (NREL), and the marine environment conditions required for the analysis were based on the Ulsan Meteorological Buoy data from the Korea Meteorological Administration. The FAST v8 developed by NREL was used in the coupled analysis. From the simulation, the maximum response of the six degrees-of-freedom motion and the maximum load response of the joint part were compared. Additionally, redundancy was verified under abnormal conditions. The results indicate that the platform has a maximum displacement radius of approximately 40 m under an extreme sea state, and when one mooring line is broken, this distance increased to approximately 565 m. In conclusion, redundancy should be verified to determine the design of floating offshore wind farms or the arrangement of mooring systems.

• 대한조선학회논문집
• /
• 제48권5호
• /
• pp.421-425
• /
• 2011

To know the speed performance of "ARAON" in Arctic ice field, the measurement of ice properties which is ice thickness & strength, snow depth and free board were performed on July 2010. The measuring method of nautical signals such as heading angle, power of engine, wind & current information etc. was described in this paper. The speed sea trials in ice were performed on the four different positions with different ice properties and engine powers because the uniform level ice is not detected in the Chukchi Sea. The test field was partially constrained ice floe with hummocks and it was superposed with small broken ice pieces each other. All of the measured ice properties were compared and evaluated according to the results of sea trial. The relations between speed, ice thickness, strength and power were summarized. Consequently according to the sea trial results, the speed of ARAON is 2.78knots at the 2.49m ice thickness with 6.55MW engine power.