• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.81-82
• /
• 2007

The stochiometric mix of evaporating materials for the $CdGa_2Se_4$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, $CdGa_2Se_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $630^{\circ}C\;and\;420^{\circ}C$, respectively. After the as-grown single crystal $CdGa_2Se_4$ thin films were annealed in Cd-, Se-, and Ga -atmospheres, the origin of point defects of single crystal $CdGa_2Se_4$ thin films has been investigated by PL at 10 K. The native defects of $V_{Cd},\;V_{Se},\;Cd_{int},\;and\;Se_{int}$ obtained by PL measurements were classified as donors or acceptors. And we concluded that the heat-treatment in the Cd-atmosphere converted single crystal $CdGa_2Se_4$ thin films to an optical p-type. Also, we confirmed that Ga in $CdGa_2Se_4$/GaAs did not form the native defects because Ga in single crystal $CdGa_2Se_4$ thin films existed in the form of stable bonds.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.152-153
• /
• 2007

$CuInSe_2$ single crystal thin film was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy (HWE) system. After the as-grown $CuInSe_2$ single crystal thin films was annealed in Cu-, Se-, and In-atmospheres, the origin of point defects of $CuInSe_2$ single crystal thin films has been investigated by the photoluminescence(PL) at 10 K. The native defects of $V_{Cu}$, $V_{Se}$, $Cu_{lnt}$, and $Se_{lnt}$ obtained by PL measurements were classified as a donors or acceptors type. And we concluded that the heat-treatment in the Cu-atmosphere converted $CuInSe_2$ single crystal thin films to an optical n-type. Also, we confirmed that In in $CuInSe_2$/GaAs did not form the native defects because In in $CuInSe_2$ single crystal thin films existed in the form of stable bonds.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.154-154
• /
• 2003

A stoichiometric mixture of evaporating materials for CuGaSe2 single crystal thin films was prepared from horizontal electric furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal CuGaSe2, it was found tetragonal structure whose lattice constant at and co were 5.615 ${\AA}$ and 11.025 ${\AA}$, respectively. To obtain the single crystal thin films, CuGaSe2 mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy (MWE) system. The source and substrate temperatures were Slot and 450$^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (UXD). The carrier density and mobility of CuGaSe2 single crystal thin films measured with Hall effect by van der Pauw method are 5.0l${\times}$10$\^$17/ cm$\^$-3/ and 245 $\textrm{cm}^2$/V$.$s at 293K, respectively. The temperature dependence of the energy band gap of the CuGaSe2 obtained from the absorption spectra was well described by the Varshni's relation, Eg(T) = 1.7998 eV - (8.7489${\times}$10$\^$-4/ eV/K)T$^2$/(T + 335 K. After the as-grown CuGaSe2 single crystal thin films was annealed in Cu-, Se-, and Ca-atmospheres, the origin of point defects of CuGaSe2 single crystal thin films has been investigated by the photoluminescence(PL) at 10 K The native defects of V$\_$CU/, V$\_$Se/, Cu$\_$int/, and Se$\_$int/ obtained by PL measurements were classified as a donors or accepters type. And we concluded that the heat-treatment in the Cu-atmosphere converted CuGaSe2 single crystal thin films to an optical n-type. Also, we confirmed that Ga in CuGaSe2/GaAs did not form the native defects because Ga in CuGaSe2 single crystal thin films existed in the form of stable bonds.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.346-349
• /
• 2007

치밀한 $CuInSe_{2}$ (CIS) 태양전지용 광흡수층을 제조하기 위해 상용되는 출발물질을 이용하여 비진공방식인 paste coating 법으로 CIS 막을 제조하였다. 먼저 치밀한 CIS 막 제조를 위해 $Cu_{2}Se$의 액상 거동을 관찰하였다. 이러한 $Cu_{2}Se_{2}$의 액상거동을 위해 Se 분위기에서 Se 증발온도, 기판온도, 열처리시간 등을 다양하게 변화 시켰으며, Se 증발온도 $450^{\circ}C$, 기판온도 $550^{\circ}C$, 열처리시간 30분 그리고 수송가스 ($N_{2}$)를 20 sccm으로 최적조건을 형성하였다. 이러한 최적조건을 바탕으로 치밀한 CIS막을 위해 two-zone RIP (rapid temperature process) 방법으로 Se 분위기 안에서 셀렌화를 위한 열처리를 행하였다. 셀렌화를 위해 다양한 열처리시간에 따라 형성된 CIS 막은 CIS 광흡수층과 Mo 박막 사이에서 $MoSe_{2}$ 층이 형성되었지만, 균일한 CIS 막을 얻었으며 업자성장과 치밀화 거동을 관찰 하였다. 또한, CIS 막의 치밀화를 위해 Se 증발온도와 열처리시간을 고정하고 기판온도를 $600^{\circ}C$로 증가시켜 $Cu_{2}Se$의 액상거동을 관찰하였다. $600^{\circ}C$에서 형성된 CIS 막은 기판온도 $500^{\circ}C$의 시편보다 입자성장과 치밀화가 되었으나 기판으로 사용하는 soda-lime glass의 휨 현상이 발생하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.5
• /
• pp.730-746
• /
• 2015

Selenium plays an important role in boar nutrition via participating in selenoprotein synthesis. It seems likely that selenoproteins are central for antioxidant system regulation in the body. Se-dependent enzyme glutathione peroxidase (GSH-Px) is the most studied selenoprotein in swine production. However, roles of other selenoproteins in boar semen production and maintenance of semen quality also need to be studied. Boar semen is characterised by a high proportion of easily oxidized long chain polyunsaturated fatty acids and requires an effective antioxidant defense. The requirement of swine for selenium varies depending on many environmental and other conditions and, in general, is considered to be 0.15 to 0.30 mg/kg feed. It seems likely that reproducing sows and boars are especially sensitive to Se deficiency, and meeting their requirements is an important challenge for pig nutritionists. In fact, in many countries there are legal limits as to how much Se may be included into the diet and this restricts flexibility in terms of addressing the Se needs of the developing and reproducing swine. The analysis of data of various boar trials with different Se sources indicates that in some cases when background Se levels were low, there were advantages of Se dietary supplementation. It is necessary to take into account that only an optimal Se status of animals is associated with the best antioxidant protection and could have positive effects on boar semen production and its quality. However, in many cases, background Se levels were not determined and therefore, it is difficult to judge if the basic diets were deficient in Se. It can also be suggested that, because of higher efficacy of assimilation from the diet, and possibilities of building Se reserves in the body, organic selenium in the form of selenomethionine (SeMet) provided by a range of products, including Se-Yeast and SeMet preparations is an important source of Se to better meet the needs of modern pig genotypes in commercial conditions of intensive pig production.

• Journal of Nutrition and Health
• /
• v.26 no.7
• /
• pp.899-906
• /
• 1993

Human blood selenicum(Se) level depends on the Se content and bioavailablilty of foods. In countries where the soil has low Se content, the differences of Se intake and blood Se concentration are shown according to the type of diet. In this study, Se status of women eating an average German diet(175 German healthy women) and wholesome nutrition group(243 women) were studied. There were significant differences in wholeblood and plasma Se levels between the two groups. In average German diet group, mean wholeblood Se concentration was 84.97ug/l and plasma Se concentration was 75.02ug/l. In wholesome nutrition group mean wholeblood Se concentration and plasma Se concentration with Se levels, correlation analysis was conducted between Se concentration and BMI, age and daily food intake. BMI and age did not correlate significantly with wholeblood and plasma Se levels. In wholesome nutrition group, serum and wholeblood Se levels had significant correlation with fish intake.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.62-62
• /
• 2011

현재 TFT의 주요 재료로 사용되는 비정질 실리콘은 전하 이동도가 매우 작아 고속 스위칭과 같은 고성능을 구현하기 어려우며 이동도 향상을 위해 고온 공정이 적용되야 하는 단점을 가지고 있다. 이러한 문제를 해결하기 위해 전하 이동도가 큰 박막재료를 바탕으로 박막 트랜지스터의 연구개발이 필요하며 이를 위한 해결책 중 새로운 스위칭 동작원리를 제공하며 고 이동도를 갖는 비정질 칼코지나이드 재료가 각광 받고 있다. 본 연구에서는 박막 스위칭 소자 응용을 위해 GeTe 재료를 기반으로 Se을 치환하여 GeSexTe1-x 박막을 제작한 후 소자의 전기적 특성을 평가하였다. GeTe 박막의 결정화 온도는 $187^{\circ}C$였으며 Se을 점진적으로 첨가한 GeSexTe1-x (X=0.2, 0.4, 0.6) 박막의 경우 각각 $213^{\circ}C$, $240^{\circ}C$, $287^{\circ}C$로 측정되었다. 이는 상대적으로 Ge과 Se의 결합에너지가 Ge과 Te의 결합에너지 보다 크기 때문에 Se 함량의 증가에 따라 비정질상의 안정성이 증가된 것으로 판단된다. 비교적 열적 안정성이 높은 3가지의 각각 다른 Se함량을 가진 Ge1.07 Se0.50 Te0.43, Ge1.07 Se0.68 Te0.26, Ge0.95 Se0.90 Te0.15의 소자를 제작하여 스위칭 특성을 분석하였다. GeTe의 경우 전형적인 메모리 스위칭 특성이 나타난 반면 위의 조성을 갖는 박막의 경우 반복적인 문턱 스위칭 특성을 보였다. 이는 Se이 첨가되면서 열적 안정성의 증가로 인해 스위칭이 일어난 후에도 비정질 상을 유지하기 때문이라 판단된다. 각각 제작된 소자에서 인가 전압의 증가와 펄스의 rising time 감소에 따라 더 빠른 스위칭 시간을 보였으며 Se함량이 감소함에 따라 스위칭 전압 또한 감소하는 것을 확인하였다. On 상태의 저항은 Se 함량에 따라 크게 차이가 없었지만 Off 상태의 저항은 Se 함량이 증가됨에 따라 증가되는 것을 확인하였다. 결과적으로 Se 함량에 따른 스위칭 특성의 최적화를 통해 고성능 스위칭 소자에 적용될 수 있을 것이라 판단된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.404-405
• /
• 2011

Cu(InGa)$Se_2$ (CIGS) 박막 태양전지의 저가 및 대면적화를 위한 양산화 공정인 two-step process (sputter/selenization) 공정에서는 sputtering으로 형성한 metal precursor stack을 $H_2$ Se gas를 이용하여 selenization하는 공정을 주로 이용한다. 하지만 이러한 selenization 공정은 유독한 $H_2$ Se gas를 이용해야 한다는 점과 긴 시간 동안 열처리를 해야 하는 단점을 가지고 있다. 이에 metal precursor stack 위에 Se 막을 우선 증착하고, Rapid Thermal Process (RTP)를 이용하여 selenization하는 방법이 현재 많은 관심을 끌고 있다. 본 논문에서는 sputtering 이후 RTP를 이용한 CIGS 흡수층 제작에 대한 선행연구의 일환으로 co-evaporator 장비를 이용하여 다양한 구조의 precursor를 제작하고 RTP 조건에 따른 selenization 효과를 연구하였다. Co-evaporator를 이용하여 CIGS, CIG/Se, CuGa/In/Se, In/CuGa/Se 4가지 구조의 precursor stack을 Mo coated soda lime glass 위에 제작하였다. 이때 amorphous 상태의 precursor stack을 만들기 위하여 기판에 열은 가하여 주지 않았으며, 각각의 stack 구조에서 가지고 있는 Cu, In, Ga, Se의 총량을 동일하게 유지하기 위하여 각 stack의 증착 시간을 동일하게 유지하였다. Selenization을 위한 RTP 조건은 550, $600^{\circ}C$ 각각에 대하여 1, 5, 10분으로 split을 진행하였다. Precursor stack의 증착 후 관찰한 XRD 결과는 비정질 상태를 잘 나타내었으며, SEM 결과 CIGS precursor stack을 제외한 나머지 구조의 stack에서는 In 박막의 surface roughness로 인하여 박막의 평탄화가 좋지 않음을 확인하였다. CIGS precursor stack의 경우, RTP 온도와 시간 split와 상관없이 결정화가 잘 이루어졌으나 grain의 성장이 부족하였다. 이에 비하여 CIG/Se, CuGa/In/Se, In/CuGa/Se 구조의 precursor stack의 경우, $550^{\circ}C$ 열처리에서는 InSe의 결정상이 관찰 되었으며 $600^{\circ}C$, 5분 이상 열처리에서 CIGS 결정상이 관찰되었다. 이러한 결과는 Se이 metal 원소들과 함께 있는 CIGS 구조에 비하여 metal precursor stack 위에 Se을 증착한 stack 구조들의 경우는 CIGS 결정을 형성하기 위해 Se이 metal 층들로 확산되어 반응을 하여야 하므로 상대적으로 많은 열에너지가 필요한 것으로 이해할 수 있으며, RTP를 이용한 selenization 공정으로 CIGS 박막 태양전지의 흡수층 형성이 가능함을 확인하였다.

• Current Photovoltaic Research
• /
• v.3 no.3
• /
• pp.75-79
• /
• 2015

Recently, $Cu_2ZnSn(S_xSe_{1-x})_4$ (CZTSSe) has been received a tremendous attraction as light absorber material in thin film solar cells (TFSCs), because of its earth abundance, inexpensive and non-toxic constituents and versatile material characteristics. Kesterite CZTSSe thin films were synthesized by sulfo-selenization of sputtered Cu/Sn/Zn stacked metallic precursors. The sulfo-selenization of Cu/Sn/Zn stacked metallic precursor thin films has been carried out in a graphite box using rapid thermal annealing (RTA) technique. Annealing process was done under sulfur and selenium vapor pressure using Ar gas at $520^{\circ}C$ for 10 min. The effect of tuning Se/(S+Se) precursor composition ratio on the properties of CZTSSe films has been investigated. The XRD, Raman, FE-SEM and XRF results indicate that the properties of sulfo-selenized CZTSSe thin films strongly depends on the Se/(S+Se) composition ratio. In particular, the CZTSSe TFSCs with Se/(S+Se) = 0.37 exhibits the best power conversion efficiency of 4.83% with $V_{oc}$ of 467 mV, $J_{sc}$ of $18.962mA/cm^2$ and FF of 54%. The systematic changes observed with increasing Se/(S+Se) ratio have been discussed in detail.

• Journal of Sensor Science and Technology
• /
• v.17 no.6
• /
• pp.437-446
• /
• 2008

Single crystalline ${ZnIn_2}{Se_4}$ layers were grown on thoroughly etched semi-insulating GaAs (100) substrate at $400^{\circ}C$ with hot wall epitaxy (HWE) system by evaporating ${ZnIn_2}{Se_4}$ source at $630^{\circ}C$. The crystalline structure of the single crystalline thick films was investigated by the photoluminescence (PL) and Double crystalline X-ray rocking curve (DCRC). The carrier density and mobility of ${ZnIn_2}{Se_4}$ single crystalline thick films measured from Hall effect by van der Pauw method are $9.41{\times}10^{16}cm^{-3}$ and $292cm^2/V{\cdot}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the ${ZnIn_2}{Se_4}$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)$=1.8622 eV-$(5.23{\times}10^{-4}eV/K)T^2$/(T+775.5 K). After the as-grown ${ZnIn_2}{Se_4}$ single crystalline thick films was annealed in Zn-, Se-, and In-atmospheres, the origin of point defects of ${ZnIn_2}{Se_4}$ single crystalline thick films has been investigated by the photoluminescence (PL) at 10 K. The native defects of $V_{Zn}$, $V_{Se}$, $Zn_{int}$, and $Se_{int}$ obtained by PL measurements were classified as a donors or acceptors type. And we concluded that the heat-treatment in the Se-atmosphere converted ${ZnIn_2}{Se_4}$ single crystalline thick films to an optical p-type. Also, we confirmed that In in ${ZnIn_2}{Se_4}$/GaAs did not form the native defects because In in ${ZnIn_2}{Se_4}$ single crystalline thick films existed in the form of stable bonds.