• Tuberculosis and Respiratory Diseases
• /
• v.49 no.2
• /
• pp.217-224
• /
• 2000

Background : It is well known that when macrophages are stimulated with endotoxin, they produce a wide variety of cytokine mediators, including TNF-$\alpha$ and IL-1$\beta$. However, there is an alteration in the macrophages' responsiveness when they are challenged with repeated bouts of endotoxin, termed "endotoxin tolerance" which is regarded as a self-protective phenomenon from continuous stimulation. In this study, endotoxin tolerance in the peripheral blood monocytes of sepsis patients was evaluated. Methods : Fourteen patients with organism-documented sepsis were included. The severity of illness was evaluated by APACHE II score. Peripheral blood monocytes were isolated from the patients and diluted to $1{\times}10^5$ well. After stimulation with endotoxin (LPS of E. coli O114 : B4, 100 ng/ml), they were incubated at $37^{\circ}C$ in 5% $CO_2$ incubator for 24 hours. Supernatant was collected for the measurement of TNF-$\alpha$ and IL-1$\beta$ with ELISA method. Peripheral blood monocytes of seven healthy volunteers were used as control. Results : The APACHE II score (mean$\pm$SD) of the patients at the time of blood sampling was 12.2$\pm$5.7. The primary infection foci were urinary tract infection, pneumonia, subacute bacterial endocarditis, and catheter related infection, etc. The causative organisms were gram negative rods (10 cases), gram positive cocci (6 cases) with two cases of mixed infection. Serum TNF-$\alpha$ could be measured in 4 cases with 29.9$\pm$27.7 pg/ml. Serum IL-1$\beta$was measurable in only one patient. The TNF-$\alpha$ level of supernatant of cultured peripheral blood monocytes was 2,703$\pm$2,066 pg/ml in patients and 2,102$\pm$1914 pg/ml in controls. The IL-1$\beta$level of supernatant was 884$\pm$1,050 pg/ml in patients and 575$\pm$558 pg/ml in controls. There was no difference of TNF-$\alpha$ and IL-1$\beta$ level between patients and controls. Conclusion : We cannot prove the phenomenon of endotoxin tolerance in this study. Future study needs to be focused on the more severe sepsis patients who were taken for sampling earlier. Addition of serum to the culture medium could be an another valuable option for the success of this study.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.4
• /
• pp.388-394
• /
• 2003

Background : Monoclonal antibodies directed against well-known epitopes on cytokeratin (CK) 8, 18 and 19 (Monototal) have been used in the development of a new diagnostic tool for lung cancer. In the mid-1990s, CK 19 fragments (Cyfra 21-1) became popular and widely used for such diagnosis. This is the first study specifically designed to compare these two markers. Method : The serum levels of CK 8, 18 and 19 were measured using two-site monoclonal/polyclonal immunoradiometric assay kit in 57 healthy adults and 289 patients who were admitted to Seoul National University Hospital from May to September, 2002. The lung cancer group comprised 129 primary lung cancer patients; 116 with non-small cell lung cancer(NSCLC) and 13 with small cell lung cancer (SCLC). The control group comprised 160 non-malignant pulmonary lung disease patients and 57 healthy adults. A total of 166 twin Monototal and Cyfra 21-1 serum assays were obtained; 76 with lung cancer, 70 with non-malignant pulmonary lung disease and 20 healthy adults. Results : The mean serum value of Monototal was $412.47{\pm}455.45U/L$ in NSCLC, $237.08{\pm}145.15U/L$ in SCLC, $126.54{\pm}95.72U/L$ in non-malignant pulmonary lung disease, and $63.68{\pm}31.66U/L$ in healthy adults. The serum values of the lung cancer groups were significantly higher than those of the control group (p<0.01). Using a cut off value of 188U/L, sensitivity and specificity was 66.4% and 81.9% in NSCLC, and 43.8% and 81.9% in SCLC, respectively. The serum levels of CK 8, 18 and 19 were higher in advanced NSCLC than in early stage disease. Conclusion : The serum levels of CK 8, 18 and 19 may be useful in the diagnosis of NSCLC.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.4
• /
• pp.471-479
• /
• 2012

This study was conducted to investigate the effects of various levels of chitosan oligomer (CO) molecular weight on the disorders of lipid metabolism and immune-related factors induced by 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), that is a endocrine disrupter, using adult male rats (SD) for 3 weeks. These 40 animals were divided into five groups. Three kinds of CO were used by molecular weight (MW) (less than 1000, 1000~3000, and 5000~10000) and added 4% to basal diets respectively. TCDD (40 ${\mu}g$/kg B.W) was intraperitoneally injected into rats at the beginning of the experiment. The relative weights of the livers were increased in all rats treated with TCDD, and the brain and testis weights were increased in all CO diet groups, compared to the control and TCDD groups. The levels of white blood cells (WBC) and red blood cells (RBC), hemoglobin, hematocrits (HCT), and platelets were significantly lowered by treating TCDD. By the way, RBC and HCT tended to recover by CO diets. The elevation of serum total and HDL cholesterol levels induced by TCDD treatment was significantly reduced by CO (5000~10000 MW) diets. The apparent increasing of the total lipid, cholesterol, and triglyceride levels of rat livers induced by TCDD was tended to be suppressed in those fed CO diets. Especially, diets with less than 1000 MW significantly diminished liver triglycerides. The levels of serum immunoglobulin (Ig) A, IgG1 and IgM were significantly high in rats fed CO (5000~10000 MW) diets. The decreasing levels of IgE by treatment with TCDD tended to recover all the CO diet groups to the level of control group. In histochemical observation, the fat droplets and apoptosis of liver due to TCDD treatment were markedly alleviated in all CO diet groups. These results indicated that CO, though not regular according to molecular weight, can exert improving effects on lipid accumulation, hepatocytic disorders, abnormal blood cells, and some immunoglobulins induced by TCDD.

• Korean Journal of Biological Psychiatry
• /
• v.13 no.4
• /
• pp.279-288
• /
• 2006

Objectives : We investigated the association of SNP A and P1763 polymorphisms on dystrobrevin binding protein 1(DTNBP1) gene with smooth pursuit eye movement(SPEM) abnormality in Korean schizophrenic patients. Methods : We measured SPEM function in 217 Korean schizophrenics(male 116, female 101) and divided them into two groups, one is a good SPEM function group and the other is a poor SPEM function group. We then analyzed SNP A polymorphism and P1763 polymorphism on DTNBP1 gene from their DNAs extracted from their blood. We compared the differences of genotype and allele distributions of the two polymorphisms on DTNBP1 gene between the two groups. Results : The Ln S/N ratio(mean${\pm}$SD) of the good SPEM function group was $4.39{\pm}0.33$ and the ratio of poor SPEM function group was $3.17{\pm}0.71$. There were no statistically significant differences of age and male/female ratio between the two groups. There were no significant differences of genotype or allele distributions of the SNP A polymorphism and P1763 polymorphism on DTNBP1 gene between the two schizophrenic groups divided by SPEM function. Conclusion : The results suggest that SNP A polymorphism and P1763 polymorphism on DTNBP1 gene might not be related to SPEM function abnormality in schizophrenia.

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.211-221
• /
• 2006

Purpose The aims of this study were to evaluate micro-tensile bond strength of composite resin bonded to dentin following high-speed rotary handpiece preparation or Er:YAG laser preparation with two different adhesive systems and to assess the influence of different Er:YAG laser energies on the micro-tensile bond strength. Materials and Methods In this study, 40 third morlars were used. Flat dentin specimans were obtained and randomly assigned to eight groups. Dentin surfaces were prepared with one of four cutting types: carbide bur, Er:YAG laser (2 W, 3 W and 4 W) and conditioned with two bonding systems, Scotchbond Multipurpose Plus (SM), Clearfil SE bond (SE) and composite resin-build ups were created. After storage for 24 hours, each specimen was serially sectioned perpendicular to the bonded surface to produce more than thirty slabs in each group. Micro-tensile bond strength test was performed at a crosshead speed of 1.0 mm/min. Micro-tensile bond strengths (${\mu}TBS$) were expressed as means$\pm$SD. Data were submitted to statistical analysis using two-way ANOVA, one-way ANOVA, Student-Newman-Keuls' multiple comparison test and t-test. Results and Conclusion 1. Regardless of bonding systems, the ${\mu}TBS$ according to cutting types were from highest to lowest : 3 W, 2 W, Bur, and 4 W. In addition, there was no significant difference between Bur and 4 W (p<0.001). 2. Regardless of cutting types, SM showed significantly higher ${\mu}TBS$ than SE (p<0.001). 3. Bonding to dentin conditioned with SM resulted in higher ${\mu}TBS$ for 3 W compared to Bur, 2 W, and 4 W. There was no significant difference between 2 W and Bur (p<0.001). 4. Bonding to dentin conditioned with SE resulted in higher ${\mu}TBS$ for 3 W compared to 2 W, 4 W, and Bur. Bur exhibited significant lower ${\mu}TBS$ than all other cutting types. There were no significant differences between 3 W, 2 W and between 4 W and Bur (p<0.001). 5. The ${\mu}TBS$ of laser cutting groups were shown in order from highest to lowest: 3 W, 2 W and 4 W in two bonding systems. There was no significant difference between 2 W and 3 W in SE (p<0.001). : The ${\mu}TBS$ of composite resin bonded dentin was significantly affected by interaction between the cutting type and bonding system. In the range of 2 W-3 W, cavity preparation of the Er:YAG laser seems to supply good adhesion of composite resin restoration no less than bur preparation. In particular, if you want to use the self-etching system, including Clearfil SE bond for the purpose of a simplification of the bonding procedures and prevention of adverse effects by excessive etching, an Er:YAG laser may offer better adhesion than a bur.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.11
• /
• pp.9-18
• /
• 2003

Two configurations of Film Bulk Acoustic Wave Resonators with acoustic quater-wave bragg reflector layers are theoretically analyzed using equivalent circuits and the difference of their characteristics are discussed. We compare the characteristics of λ/2 mode to those of ideal FBAR with top and bottom electrode contacting air and the characteristics of λ/4 mode to those of ideal FBAR with top electrode contacting air and bottom electrode clamped. We assume that the piezoelectric film is ZnO, the electrode is A1 and the substrate is Si, ABCD parameters are extracted and input impedance is calculated by converting the equivalent circuit from Mason equivalent circuits to the simplified equivalent circuits that ABCD parameters are extracted possible, From the variation of resonance frequency due to the change of thickness of reflector layers and the variation of electrical Q due to the change of mechanical Q of reflector layers, it is confirmed that the reflector layer just under the bottom electrode have the greatest effect on the varation of resonance frequency and electrical Q. It is shown that the number of reflector layers required for the saturation of electrical Q decreases with the increase of the impedance ratio of reflector layers and electrical Q of λ/2 mode is larger than that of λ/4 mode, Electromechanical coupling factor is independent of the number of layers, The impedance ratio of reflector layers becomes larger as the electromechanical coupling factor becomes larger, The electromechanical coupling factor of the two mode are smaller than those of ideal FBARs because of the trapping of acoustic energy in the reflector layers, The insertion loss of the ladder filter decreases with the increase of the number of reflector layers but the bandwidth is not affected much by the number of reflector layers, As the impedance ratio of reflector layers becomes larger the insertion loss becomes smaller and the bandwidth becomes wider, In our analysis of the two mode, characteristics of λ/2 mode appear to be slightly more favorable than that of λ/4 mode

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.6
• /
• pp.6-15
• /
• 2009

In this paper, a new 4-way search window is designed for the high-performance 2D PE architecture in H.264 Motion Estimation(ME) to improve the memory bandwidth. While existing 2D PE architectures reuse the overlapped data of adjacent search windows scanned in 1 or 3-way, the new window utilizes the overlapped data of adjacent search windows as well as adjacent multiple scanning (window) paths to enhance the reusage of retrieved search window data. In order to scan adjacent windows and multiple paths instead of single raster and zigzag scanning of adjacent windows, bidirectional row and column window scanning results in the 4-way(up. down, left, right) search window. The proposed 4-way search window could improve the reuse of overlapped window data to reduce the redundancy access factor by 3.1, though the 1/3-way search window redundantly requires $7.7{\sim}11$ times of data retrieval. Thus, the new 4-way search window scheme enhances the memory bandwidth by $70{\sim}58%$ compared with 1/3-way search window. The 2D PE architecture in H.264 ME for 4-way search window consists of $16{\times}16$ pe array. computing the absolute difference between current and reference frames, and $5{\times}16$ reusage array, storing the overlapped data of adjacent search windows and multiple scanning paths. The reference data could be loaded upward and downward into the new 2D PE depending on scanning direction, and the reusage array is combined with the pe array rotating left as well as right to utilize the overlapped data of adjacent multiple scan paths. In experiments, the new implementation of 4-way search window on Magnachip 0.18um could deal with the HD($1280{\times}720$) video of 1 reference frame, $48{\times}48$ search area and $16{\times}16$ macroblock by 30fps at 149.25MHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.21-31
• /
• 2010

This paper presents a design of PLL and SSCG for reducing the EMI effect at the electronic machinery and tools for DisplayPort application. This system is composed of the essential element of PLL and Charge-Pump2 and Reference Clock Divider to implement the SSCG operation. In this paper, 270MHz/162MHz dual-mode PLL that can provide 10-phase and 1.35GHz/810MHz PLL that can reduce the jitter are designed for 2.7Gbps/162Gbps DisplayPort application. The jitter can be reduced drastically by combining 270MHz/162MHz PLL with 2-stage 5 to 1 serializer and 1.35GHz PLL with 2 to 1 serializer. This paper propose the frequency divider topology which can share the divider between modes and guarantee the 50% duty ratio. And, the output current mismatch can be reduced by using the proposed charge-pump topology. It is implemented using 0.13 um CMOS process and die areas of 270MHz/162MHz PLL and 1.35GHz/810MHz PLL are $650um\;{\times}\;500um$ and $600um\;{\times}\;500um$, respectively. The VCO tuning range of 270 MHz/162 MHz PLL is 330 MHz and the phase noise is -114 dBc/Hz at 1 MHz offset. The measured SSCG down spread amplitude is 0.5% and modulation frequency is 31kHz. The total power consumption is 48mW.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.6
• /
• pp.1-6
• /
• 2011

A transparent oxide thin film transistors (Transparent Oxide-TFT) have been fabricated by RF magnetron sputtering at room temperature using amorphous indium zinc oxide (a-IZO) as both of active channel and source/drain, gate electrodes and co-sputtered $HfO_2-Al_2O_3$ (HfAIO) as gate dielectric. In spite of its high dielectric constant > 20), $HfO_2$ has some drawbacks including high leakage current and rough surface morphologies originated from small energy band gap (5.31eV) and microcrystalline structure. In this work, the incorporation of $Al_2O_3$ into $HfO_2$ was obtained by co-sputtering of $HfO_2$ and $Al_2O_3$ without any intentional substrate heating and its structural and electrical properties were investigated by x-ray diffraction (XRD), atomic force microscopy (AFM) and spectroscopic ellipsometer (SE) analyses. The XRD studies confirmed that the microcrystalline structures of $HfO_2$ were transformed to amorphous structures of HfAIO. By AFM analysis, HfAIO films (0.490nm) were considerably smoother than $HfO_2$ films (2.979nm) due to their amorphous structure. The energy band gap ($E_g$) deduced by spectroscopic ellipsometer was increased from 5.17eV ($HfO_2$) to 5.42eV (HfAIO). The electrical performances of TFTs which are made of well-controlled active/electrode IZO materials and co-sputtered HfAIO dielectric material, exhibited a field effect mobility of more than $10cm^2/V{\cdot}s$, a threshold voltage of ~2 V, an $I_{on/off}$ ratio of > $10^5$, and a max on-current of > 2 mA.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.25-33
• /
• 2007

In this paper, the high isolation and wideband 94 GHz MIMIC(Millimeter-wave Monolithic Integrated Circuit) single balanced cascode mixer was designed and fabricated. Also, we designed and fabricated a 3 dB tandem coupler which has a high isolation and wideband characteristic. The single balanced resistive mixer which does not require an external IF balun was designed using the 0.1 ${\mu}m$ InGaAs/InAlAs/GaAs metamorphic HEMT(High Electron Mobility Transistor). The DC characteristics of MHEMT's are 665 mA/mm of drain current density, 691 mS/mm of maximum transconductance. The current gain cut-off frequency($f_T$) is 189 GHz and the maximum oscillation frequency($f_{max}$) is 334 GHz. A 94 GHz single balanced cascode mixer was fabricated using our 0.1 ${\mu}m$ MHEMT MIMIC process. From the measurements, the fabricated couplers showed wideband characteristics. The conversion loss of single balanced cascode mixer was 9.8 dB at an LO power of 10.9 dBm. The LO to RF isolation of single balanced cascode mixer was 29.5 dB at 94 GHz. We obtained in this study a higher LO-RF isolation compared to some other single balanced mixers.