• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.43-49
• /
• 2001

A reduced machining time and increased accuracy for the sculptured surface are very important when producing complicated parts. The step-size and tool-path interval are essential components in high speed and high resolution machining. If they are small, the machining time will increase, whereas if they are large, rough surfaces will be caused. In particular, the machining time, which is key in high speed machining, is affected by the tool-path interval more than the step-size. The conventional method for calculating the tool=path interval is to select a small parametric increment of a small increment based on the curvature of the surface. However, this approach also has limitations. The first is that the tool-path interval can not be calculated precisely. The second is that a separate tool-path interval needs to be calculated in each of the three cases. The third is that the conversion from Cartesian domain to parametric domain or vice versa must be necessary. Accordingly, the current study proposes a new tool-path interval algorithm that do not involve a curvature and that is not necessary for any conversion and a variable step-size algorithm for NURBS.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.212-219
• /
• 1998

During machining of dies and molds with sculptured surfaces. the cutter contact area changes continuously and results in cutting force variation. In order to implement cutting force prediction model into a CAM system, an effective and fast method is necessary. In this paper. a new method is proposed to predict mean cutting force. The cutter contact area in the spherical part of the cutter is obtained using Z-map, and expressed by the grids on the cutter plane orthogonal to the cutter axis. New empirical cutting parameters were defined to describe the cutting force in the spherical part of cutter. Before the mean cutting force calculation, the cutting force density in each grid is calculated and saved to force map on the cutter plane. The mean cutting force in an arbitrary cutter contact area can be easily calculated by summing up the cutting force density of the engaged grid of the force map. The proposed method was verifed through the slotting and slanted surface machining with various inclination angles. It was shown that the mean force can be calculated fast and effectively through the proposed method for any geometry including sculptured surfaces with cusp marks and holes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.985-990
• /
• 2002

Contemporary architecture calls for a wide range of surface textures and treatments. A surface compatible with the architect's design may vary from a glass-smooth finish to one requiring special sculptured ornamentation. These surfaces require many different types of form sheathing and lining. The purpose of study development new design form and made elaborateness shape. Easy to used in field that architecture finish material not used expect effective reduce of working hours, personnel expenses, architecture finish material, cost. After this, building wall apply a variety shape in concrete surface.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.573-578
• /
• 2003

Contemporary architecture calls for a wide range of surface textures and treatments. A surface compatible with the architect's design may vary from a glass-smooth finish to one requiring special sculptured ornamentation. These surfaces require many different types of form sheathing and lining. The purpose of study development new design form and made elaborateness shape. Easy to used in field that architecture finish material not used expect effective reduce of working hours, personnel expenses, architecture finish material, cost. After this, building wall apply a variety shape in concrete surface

• 보존과학회지
• /
• 제16권
• /
• pp.39-51
• /
• 2004

진천태화4년명 마애불 입상은 암회색 셰일의 암벽에 선각되어 있으며 전면은 $N40^{\circ}W$의 주향과 거의 수직에 가까운 배면경사를 갖는다. 불상이 선각된 암반은 미세엽리와 층리가 발달되어 있으며 , 크고 작은 불연속면이 불규칙하게 분포한다. 마애불은 거의 전신에 걸쳐 박리와 박락된 부분이 많아 신체의 각 부분이 불분명하다. 마애불 주변에 분포하는 암석의 표면에는 지의류와 선태류의 오염이 심각하며 잡초와 수근이 암석의 기계적 및 생물학적 풍화작용을 가중시키고 있다. 보존처리를 위해 1차 건식세척과 증류수를 이용한 2차 습식세척을 실시하였다. 암석의 이탈부위와 균열부위는 석조문화재 보존처리용 고분자 화합물을 이용하여 충전 및 접착하였다. 박락이 발생하는 표면에는 에칠 실리케이트를 사용하여 발수경화처리를 하였으며 표면의 이질감이 발생하지 않도록 색 맞춤을 하였다. 마애불 상부의 비탈로부터 흘러내리는 우수를 제어하기 위해 배수로를 만들었다. 또한 주변의 수목 및 잡초를 제거하여 향후 지의류의 발생을 억제시켰다. 이 마애불은 다양한 요인의 표면풍화에 의해 석재 자체의 성능이 저하되어 있으므로, 장기적인 모니터링과 함께 종합적인 보존방안을 연구해야 할 것이다.

• 한국정밀공학회지
• /
• 제14권9호
• /
• pp.22-29
• /
• 1997

This paper describes a three dimensional profile measurement method for sheet metal products which have flexible and porous sculptured surfaces. Shadow masks are used as measuring objects for practical implementation or this study. The shadow masks are located inside the fluorescent glasses of monitors for televisions or computers and used to prevent electron guns from interfering between pixels. Three dimen- sional surface profiles are measured by adopting a software autofocusing technique to capture focused images. The experimental results show that the method is very effecive and suitable for sheet meal prod- ucts with flexible and porous surfaces.

• 한국정밀공학회지
• /
• 제8권4호
• /
• pp.84-94
• /
• 1991

In order to achieve high accuracy of teaching and increase productivity using industrial robots in polishing process of dies, an off-line task programming system was developed on IBM-PC/386 under WINDOWS 3.0 operating system. The internal structure and the machematical basis of CAMPoli are described. Surface modeling technique of polishing dies with sculptured surfaces is introduced by poing data interpolation methodology through the use of CL-data transmitted from conventional CAM system. Tool selection, polishing speed, polishing pressure and kinds of tool motions can be determined and selected by user specified polishing variables. Task creation and verification of polishing path via computer graphics simulation of polishing tool can be done by the menu- driven function of CAMPoli system. Post-processing module is attached to generate robot language. Some simulation results are provided as verification means of the system.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.46-59
• /
• 1998

This paper presents shape design, surface construction, and cutting path generation for the surface of marine ship propeller blades. A propeller blade should be designed to satisfy performance constraints that include operational speed which impacts rotations per minutes, stresses related to deliverable horst power, and the major length of the marine ship which impacts the blade size and shape characteristics. Primary decision variables that affect efficiency in the design of a marine ship propeller blade are the blade diameter and the expanded area ratio. The blade design resulting from these performance constraints typically consists of sculptured surfaces requiring four or five axis contoured machining. In this approach a standard blade geometry description consisting of blade sections with offset nominal points recorded in an offset table is used. From this table the composite Bezier surface geometry of the blade is created. The control vertices of the Hazier surface patches are determined using a chord length fitting procedure from tile offset table data. Cutter contact points and path intervals are calculated to minimize travel distance and production time while maintaining a cusp height within tolerance limits. Long path intervals typically generate short tool paths at the expense of increased however cusp height. Likewise, a minimal tool path results in a shorter production time. Cutting errors including gouging and under-cut, which are common errors in machining sculptured surfaces, are also identified for both convex and concave surfaces. Propeller blade geometry is conducive to gouging. The result is a minimal error free cutting path for machining propeller blades for marine ships.

• 한국정밀공학회지
• /
• 제17권1호
• /
• pp.185-191
• /
• 2000

Direct ＆ adaptive slicing of sculptured surfaces in RP improves, quality ＆ accuracy of the final product, compared to the slicing with uniform layer thickness or the slicing of facets (ie, STL). Present D＆A slicing procedures adaptively compute the next layer thickness based on the surface information of current sliced contour, which assumes constant normal curvature values. In some cases, however. such assumption leads to intolerable slicing result which cannot correctly consider the entire local feature shape. We propose improved adaptive slicing algorithms which can determine near-optimal layer thickness, including illustrated examples.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1372-1380
• /
• 1993

본 연구에서는 당 연구실에서 개발한 곡면모델러인 CASSET(computer aided sculptured surface engineering tool)에 구현된 트리밍기능을 중심으로 트리밍곡면의 생성방법을 설명하고자 한다. 먼저 CASSET에서 곡선 및 곡면을 표현하는 방법과 곡면 위에 존재하는 곡선의 생성방법 및 곡선간의 교점을 구하는 방법을 설명하고 곡선의 트리밍 절차를 통하여 트리밍곡면의 전반적인 생성절차를 보이겠다.