• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.119-124
• /
• 2000

In this paper based on geometric optics and geometric modeling aspheric surface of the side mirror mold with dead angle reduced have been designed and machined in a CNC machining center, Surface roughness of the mold was evaluat-ed by usin the surface shaping system. Surface generating simulation of a ball endmill process is investigated. Through the simulation based on the surface-shaping system 3-D engineered surfaces and properties of engineered surfaces are obtained, Computer simulation provides the effective working conditions through the prediction of geometric properties of engineered surfaces. The rear view mirror and room mirror play important role on the safe driving condition as a observation of environment but the rear view mirror can not provide complete information of driving environments due to the existence of the dead angle. The analysis on the shape of formed mirror shows that the proposed me？ improves range of a driver's sight.

• 한국CDE학회논문집
• /
• 제3권3호
• /
• pp.161-167
• /
• 1998

Cutting forces in ball-end milling of slanted surfaces are calculated. The cutting area is determined from the Z-map of the surface geometry and current cutter location. The obtained cutting area is projected onto the cutter plane normal to the Z-axis and compared with cutting edge element location. Cutting force is calculated by integration of elemental cutting forces of engaged cutting edge elements. Experiments with various slanted angles were performed to verify the proposed cutting force estimation model. It is shown that the proposed method predicts cutting force effectively for any geometry including sculptured surfaces with cusp marks and surfaces with pockets and holes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.985-990
• /
• 2002

Contemporary architecture calls for a wide range of surface textures and treatments. A surface compatible with the architect's design may vary from a glass-smooth finish to one requiring special sculptured ornamentation. These surfaces require many different types of form sheathing and lining. The purpose of study development new design form and made elaborateness shape. Easy to used in field that architecture finish material not used expect effective reduce of working hours, personnel expenses, architecture finish material, cost. After this, building wall apply a variety shape in concrete surface.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.573-578
• /
• 2003

Contemporary architecture calls for a wide range of surface textures and treatments. A surface compatible with the architect's design may vary from a glass-smooth finish to one requiring special sculptured ornamentation. These surfaces require many different types of form sheathing and lining. The purpose of study development new design form and made elaborateness shape. Easy to used in field that architecture finish material not used expect effective reduce of working hours, personnel expenses, architecture finish material, cost. After this, building wall apply a variety shape in concrete surface

• 한국정밀공학회지
• /
• 제17권1호
• /
• pp.185-191
• /
• 2000

Direct ＆ adaptive slicing of sculptured surfaces in RP improves, quality ＆ accuracy of the final product, compared to the slicing with uniform layer thickness or the slicing of facets (ie, STL). Present D＆A slicing procedures adaptively compute the next layer thickness based on the surface information of current sliced contour, which assumes constant normal curvature values. In some cases, however. such assumption leads to intolerable slicing result which cannot correctly consider the entire local feature shape. We propose improved adaptive slicing algorithms which can determine near-optimal layer thickness, including illustrated examples.

• 한국전산유체공학회지
• /
• 제18권4호
• /
• pp.1-8
• /
• 2013

The performance of small-size impellers with ruled surfaces was investigated for flank milling over a wide speed range, using computational fluid dynamics analyses and gas bench tests. An impeller with a ruled surface was designed, manufactured, and tested to evaluate the effects of blade loading, the backsweep angle, and the relative velocity distribution on the compressor performance. The simulations and tests were completed using the same compressor cover with identical inlet and outlet channels to accurately compare the performance of the abovementioned impeller with a commercial impeller containing sculptured blades. Both impellers have the same number of blades, number of splitters, and shroud meridional profiles. The backsweep angles of the blades on the ruled impeller were selected to work with the same pinched diffuser as for a sculptured impeller. The inlet-to-exit relative velocity diffusion ratio and the blade loading were provided to maximize the flow rate and to minimize the surge flow rate. The design flow rate, rpm, were selected same for both impellers. Test results showed that for the compressor stage with a ruled impeller, the efficiency was increased by 0.32% with an extended surge margin without a reduction in the pressure ratio as compared to the impeller with the sculptured design. It was concluded that an increased relative velocity diffusion coupled with a large backsweep angle was an effective way to improve the compressor stage efficiency. Additionally, an appropriate blade loading distribution was important for achieving a wide operating range and higher efficiency.

• 한국정밀공학회지
• /
• 제26권2호
• /
• pp.133-140
• /
• 2009

Presented in this paper is a method to generate round-endmill toolpaths for sculptured surfaces represented as a triangular mesh model. The proposed method is applicable in toolpath generation for ball-endmills and flat-endmills because the round-endmill is a generalized tool in three-axis NC (numerical control) milling. The method uses a wireframe model as the offset model that represents a cutter location surface. Since wireframe models are relatively simple and fast to calculate, the proposed method can process large models and keep high precision. Intersection points with the wireframe offset model and a tool guide plane are calculated, and intersection curves are constructed by tracing the intersection points. The final step of the method is extracting regular curves from the intersection curves including degenerate and self-intersected segments. The proposed method is implemented and tested, and a practical example is presented.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.43-49
• /
• 2001

A reduced machining time and increased accuracy for the sculptured surface are very important when producing complicated parts. The step-size and tool-path interval are essential components in high speed and high resolution machining. If they are small, the machining time will increase, whereas if they are large, rough surfaces will be caused. In particular, the machining time, which is key in high speed machining, is affected by the tool-path interval more than the step-size. The conventional method for calculating the tool=path interval is to select a small parametric increment of a small increment based on the curvature of the surface. However, this approach also has limitations. The first is that the tool-path interval can not be calculated precisely. The second is that a separate tool-path interval needs to be calculated in each of the three cases. The third is that the conversion from Cartesian domain to parametric domain or vice versa must be necessary. Accordingly, the current study proposes a new tool-path interval algorithm that do not involve a curvature and that is not necessary for any conversion and a variable step-size algorithm for NURBS.

• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.28-41
• /
• 1994

An efficient algorithm is proposed to select the proper tools and generate their paths for NC rough cutting of dies and molds with sculptured surfaces. Even though a milling process consists of roughing, semi-finishing, and finishing, most material is removed by a rough cutting process. Therfore it can be said that the rough cutting process occupy an important portion of the NC milling process, and accordingly, an efficient rough cutting method contributes to an efficient milling process. In order work, the following basic assumption is accepted for the efficient machining. That is, to machine a region bounded by a profile, larger tools should be used in the far inside and the region adjacent to relatively simple portion of the boundary while smaller tools are used in the regions adjacent to the relatively complex protion. Thus the tools are selected based on the complexity of the boundary profile adjacent to the region to be machined. An index called cutting path ratio is proposed in this work as a measure of the relative complexity of the profile with respect to a tool diameter. Once the tools are selected, their tool paths are calculated starting from the largest to the smallest tool.

• 대한조선학회논문집
• /
• 제29권2호
• /
• pp.30-37
• /
• 1992

선체는 매우 복잡한 구조물이므로 설계 및 생산의 효율적인 수행을 위하여 선체구조의 모델링에 의한 작업이 필수적이다. 선체모델 구축에 있어서 구조면의 모델링은 초기선형정의에서부터, 선각정보처리, 구획배치, 의장설계, 배관설계, 구조해석 등 선체관련분야와 직접 연관된다. 본 연구에서는 구조면의 효과적인 모델링을 위하여 구조면들간의 위상학적인 자료구조를 구성하므로써 선체구조의 기하학적 정보를 설계의 단계에 따라 발전시켜 나가고 효율적으로 변경시킬 수 있도록 하였다. 본 연구에서 수행된 구조면의 모델링은 선체설계에서부터 생산에 이르기까지 일관된 정보처리를 위한 통합선체모델(Unified Hull Model)구축의 기초가 될 것이다. 구축된 모델의 가시화를 위하여 컴퓨터그래픽스를 이용하여 선체모델을 실물감 있게 표현하였다.