• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.5
• /
• pp.323-326
• /
• 2016

High Efficiency Video Coding (HEVC) adopts intra transform skip mode, in which a residual block is directly quantized in the pixel domain without transforming the block into the frequency domain. Intra transform skip mode provides a significant coding gain for screen content. However, when intra-prediction errors are not transformed, the errors are often correlated along the intra-prediction direction. This paper introduces a residual differential pulse code modulation (DPCM) method for the intra-predicted and transform-skipped blocks to remove redundancy. The proposed method performs pixel-by-pixel residual prediction along the intra-prediction direction to reduce the dynamic range of intra-prediction errors. Experimental results show that the transform skip mode's Bjøntegaard delta rate (BD-rate) is improved by 12.8% for vertically intra-predicted blocks. Overall, the proposed method shows an average 1.2% reduction in BD-rate, relative to HEVC, with negligible computational complexity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.2
• /
• pp.319-324
• /
• 2012

This paper introduces a 2-dimensional touch screen panel driver based on an improved capacitive sensing circuit. The improved capacitive sensing circuit based on charge pump can eliminate the remaining charges of the intermediate nodes, which may cause output voltage drift. The touch screen panel driver with mixed-mode circuits was built and simulated using Cadence Spectre. Verilog-A models the digital circuits effectively and enables them to interface with analog circuits easily. From the simulation results, we can verify the reliable operations of the simple structured touch screen panel driver based on the improved capacitive sensing circuit offering no voltage drift.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1997.11a
• /
• pp.140-145
• /
• 1997

A stuey to investigate the perception characteristics of color and brightness was conducted in a combined PC and TV monitor, The objective of this study is to suggest user's favorite color temperature in PC mode and user's favorite contrast in TV mode. Investigated factors were monitor coating(coatiog vs. non-coation)and screen brightness (30fL vs. 35fL)in first experiment and monitor coating and pucture movement(static vs. dynamic) in second experiment. The first experiment was conducted in TV mode. Twenty-three subjects (male 12, female 11) perticipated in this experiment. In first experiment, average color temperatures were about 8000K in all experimental conditions. In addition, there was significant difference between coating and non-coating screen at 0.1 level. In second experiment, average contrasts were obtained in all esperimental conditions. There was significant difference between coating and ndn-coating screen at 0.05 level, In addition, there was significant difference between static picture and dynamic picture at 0.1 level

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.875-877
• /
• 2011

This paper introduces a touch screen panel driver using modified charge pump circuit. The touch screen panel driver is composed of an analog circuit part which senses a touch and a digital circuit which analyse the sensed signal. To verify the functions the touch screen panel driver, a mixed-mode circuit was built and simulated using Cadence Spectre. The digital circuits were modeled with Verilog-A in order to interface with the analog circuits and verify the functionalities of the driver with less simulation time. From the simulation results, we can verify the reliable operations of the simple structured touch screen panel driver which does not include an ADC.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.5
• /
• pp.886-893
• /
• 2013

A vibrating screen with multiple decks is widely employed for the process separation of many valuable export commodities. In this study, the inclination angle of the deck of the vibrating screen and the direction angle of the screen's vibration under single particle kinematics were predicted. A finite element model of the vibrating screen was established by parameterization modeling. Through modal analysis and static analysis of the model, the natural frequency, natural vibration mode, and stress distribution of the structure were determined, based on which the dynamics and design optimization of the vibrating screen could be achieved. Future plans also reflect this by conducting detailed design of vibrating screens for the manufacturing plans of vibrating screen machine.

• Journal of the Optical Society of Korea
• /
• v.5 no.2
• /
• pp.55-59
• /
• 2001

Results of an experimental study of possible ways to extend the capabilities of a big size transmission type holographic screen are presented. Different approaches to the problem of making a big size screen have been considered and tested experimentally. Up to 60$\times$80 $\textrm{cm}^2$ screens have been recorded on a single photographic plate VRP-M. By attaching a mirror behind the screen, the reflection mode of operation has been obtained. In this arrangement some additional peculiarities appear in the screen, which can be used to extend the screen capabilities. The first possibility is to increase the screen size by mosaicking the subscreens in the reflection mode of operation. Screens of 120$\times$80 $\textrm{cm}^2$ and 180$\times$40 $\textrm{cm}^2$ have been obtained by proper alignment of 60$\times$40 $\textrm{cm}^2$ subscreens. The second possibility is to move the viewing Bone by rotation of the screen together with the mirror and thereby realize by the eye-tracking capability. Methods of increasing vertical size of the viewing zone have been considered. Along with the multi-exposure method, which was considered in previous papers, addition of the vertical diffuser with the optimized scattering angle has been tested experimentally. The vertical size of the viewing zone has been increased by up to 10-15 cm. Another method consists of usage of a diffraction grating with vertical dispersion to solve the same problem.

• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.333-336
• /
• 2010

The generation of coherent x-ray beams by using a multi-slit diffraction phenomenon is presented. The mode-confinement conditions in the x-ray waveguide (XWG) needed to obtain single-mode beams are determined. The XWGs are stacked to form an XWG array. The core of the XWG array is used as a slit in an opaque screen, similar to those used for visible light. Diffraction patterns that interfered constructively in the XWG array are investigated based on multi-slit diffraction theory. The irradiance distributions are studied at on observation screen. The FWHM of diffracted x-ray spectra were between $1.67{\times}10^{-4}$ to $3.30{\times}10^{-5}$ radians which lead to a spot-size of a few tens of micrometers on the screen at distance of 1 m. The intensities decrease with increase in the period of the XWG array, i.e. a thicker cladding, due to growth of the higher-order diffraction peaks.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.12
• /
• pp.1023-1030
• /
• 2002

This paper is to research the heat transfer characteristic performance of the copper-water heat pipe with the screen wicks. Recently, the semiconductor capacity of an electronic unit has been larger, on the contrary, its size has been much smaller. As a result, a high-performance cooling system is needed. Experimental variables are inclination angles, temperatures of cooling water and the mesh number of screen wicks. The distilled water was used for the working fluid. At the inclination angle $6^{\circ}$ in top heat mode, the two layers of the 100-mesh screen wick showed the best heat transfer performance. The thermal resistance of the two layers with the 100-mesh screen was 0.7~$0.8^{\circ}C$/W.

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.333-338
• /
• 1997

We performed a study to investigate the characteristics of color perception according to some factors and to suggest the initial setting value of color temperature in each mode of a PC and TV monitor. Investigated factors were monitor coating (coating vs. noncoating)and screen brightness(30fL vs. 35fL). Twenty-three subjects (male 12, female 11) participated in this experiment. The experiment was performed in eachmode of a PC and TV monitor. Average color temperatures were obtained in both PC- mode and TV- mode. In addition, effects of monitor coating and screen brightness were investigated.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.319-320
• /
• 2006

In this paper, we propose a vision based system employing two cameras to provide effective touch screen function. The two main processes - determining touch (or no-touch) and contact location of screen plane - are essential for enabling touch screen function. First region of interest is found by using color characteristic and histogram for determining the contact mode. Second, if the hand touches the mirror, the fingertip point in image is found using the correlation coefficient based on the mirror attribute. Subsequently, the fingertip coordinate in image is transformed to the location in mirror plane by using four predefined points (termed as four-point method) and bilinear transform. Representative experimental results show that the proposed system is suited to touch screen.