• Journal of Korean Physical Therapy Science
• /
• v.26 no.1
• /
• pp.35-44
• /
• 2019

Purpose: The purpose of this study is to investigate the effect of visual and auditory stimulation randomly applied to healthy adults on walking. Design: Randomized Controlled Trial. Methods: Twenty-six healthy students in S college were randomly divided into visual feedback group (n=13) and auditory feedback group (n=13). The visual feedback group walked using four conditions. 1) In the red screen was shown, clap twice to the right, 2) In yellow screen, clap twice to the left, 3) In green screen, clap twice over head. 4) Do not clap in purple screen. The auditory feedback group walked using four conditions. 1)in red, clap twice to the right, 2) In yellow, clap twice left, 3) In green, clap twice over your head. 4) Do not clap in purple. All subjects measured gait variables before and after the test using G-walker. Result: The visual feedback group showed a significant decrease (p<.05) in the number of steps per minute, walking speed, and step length compared with that of normal walking. The auditory feedback group showed a significant decrease (p<.05) in the number of steps per minute, walking speed, and step length than that of normal walking. Conclusion: The results of this study suggest that visual and auditory stimulation applied to healthy adults may have significant effects on walking.

• Current Photovoltaic Research
• /
• v.9 no.1
• /
• pp.6-10
• /
• 2021

The mesh mask screen, which is generally used for screen printing metallization of silicon solar cell, requires high squeegee pressure and low printing speed. These requirements are acting as a limiting factor in production yield in photovoltaic industries. In order to improve the productivity, a metal mask, which has high durability and high printing speed, has been researched. In this paper, the characteristics of each solar cell, in which electrodes were formed by using a metal mask and a mesh mask, were analyzed through recombination current density. In particular, the metal-induced recombination current density (Jom) representing the recombination of the emitter-metal interface was calculated using the shading method, and the resulting efficiency and open-circuit voltage were analyzed through the diode equation. As a result of analyzing the proportion of the metal-induced recombination current density to the total emitter recombination current density, it was analyzed that the reduction of the metal-induced recombination current density through the metal mask is an important factor in reducing the total recombination current density of the solar cell.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.5
• /
• pp.544-551
• /
• 2013

Recently high speed mixer, which is mixing, grinding, dispersion for liquid-liquid material, has been widely used several industries such as food, cosmetics, pharmaceuticals, fine chemicals, electronic material. This high speed mixer has a core element part called particle separation device. Particle separation device, which makes mixed liquid and liquid material using shear forces from a rotor and a stator, is a decisive factor in the distributed parts. In this study, we examined the velocity distribution of the two models of particle separation device using computation fluid dynamics, so that we were able to see the difference of the velocity distribution according to the shape. Also, by experiment, we observed that the use of rotor-screen type is deemed more suitable in case of accurately considering the effect of improving of the dispersibility through the circulation of the future.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.5
• /
• pp.53-59
• /
• 2009

In this paper, we describe the problems which can happen during multi-tasking process in the Windows operating system (OS) environment. To cope with the problems, multiple-windows manager program is proposed in this paper. If we use the proposed multiple-windows manager program with three virtual screen, we can obtain the effect like using four Windows OS and thus we can improve the tardy speed and the high complexity for multi-tasking process.

• Journal of Korea Multimedia Society
• /
• v.14 no.7
• /
• pp.924-932
• /
• 2011

Though the spread of the touch screen devices is now revitalized, the Korean input methods in the touch screen devices are mostly the button input methods using keypads. Even though the button input methods are used with a touch screen, they still adopts the existing qwerty keyboard. It means that the existing methods can not be improved. This research suggests that the Korean input method which can be used in the portable terminals and the touch screen devices, for example, a smart phone which has a limited sized screen. It assigns every vowel a process which corresponds with the Korean invention theory and the vowel input method is to drag it. Through the mock experiments, we confirmed that the simplification of the Korean alphabet is more efficient than the existing methods, in the point of the speed of the Korean input.

• Applied Chemistry for Engineering
• /
• v.4 no.3
• /
• pp.537-543
• /
• 1993

The effect of agitation on liquid-liquid dispersion was investigated in an immisible liquid phase(n-hexane/water) system. Four different types of six-bladed turbine impellers were used: a flat blade, two screen blades and a solid edged 60 mesh screen blade. We found that the extent of dispersion of organic phase and power consumption of agitator were decreased in the order of flat, solid edged, 60 mesh, and 40 mesh blades at same agitation speed. And the minimum agitation speed for complete dispersion of organic phase was increased with increasing volume fraction of organic phase. Also, mean diameter of liquid droplets of dispersed phase was decreased with increasing agitation speed and it was increased in the order of solid edged, flat, 60 mesh, and 40 mesh screen blades at same agitation speed. At complete dispersion, the minimum power consumption was not vary significantly with impeller blade types, but the solid edged screen blade impeller gave the smallest and uniform sizes of liquid droplets, and it had a good performance for liquid-liquid dispersion. In this condition, Power number was not affected by Reynolds number and it was constant in turbulent flow region, and Sauter mean diameter($d_{32}$) of liquid droplets was expressed as a function of volume fraction of organic phase(${\phi}$) and Weber number($N_{We}$) as follows: $d_{32}/D=a(1+b{\phi})N_{We}{^{-0.6}}$.

• The Journal of the Korea Contents Association
• /
• v.21 no.7
• /
• pp.637-649
• /
• 2021

This study aims to see, a 10-weeks program of Body Stability Exercise(BSE) was conducted on 21 male handball players at Muan Y High School and then, the results of changes in Visual Response Speed Test, Functional Movement Screen, Y-Balance Test, and Vital Capacity were observed, compared and analyzed to provide follow-up management and training data that can be used to reduce injuries and improve performance. After training, strength and quickness were increased significantly and reaction time was significantly shortened (p<0.001). The total score of Functional Movement Screen was increased from 10.43±1.16, before training to 12.05±1.07 after training, which was statistically significant(p<0.001). Y-Balance Test was significantly increased from 89.18±6.99 before training to 91.39±7.33 after training(p<0.001). The Vital Capacity increase was also shown to be more than statistically significant(p<0.001). The 10-week BSE program improved speed, agility, Functional Movement Screen, Y-Balance Test, and Vital Capacity. In conclusion, it's can prevent or reduce injuries and performance could be improved while playing handball.

• Archives of design research
• /
• v.17 no.2
• /
• pp.363-372
• /
• 2004

In the new millenium of information and digital age, the vogue cycle has been gelling shorter and shorter and the individualistic and high quality preference of contemporary consumers drive the small quantity production by order. The traditional screen printing system can not hold the competitive edge anymore. In order to actively meet the demand of the fast evolving market, compete with other nations, and produce high value-added products, we need the new production system to meet the individual needs promptly. Mass production using the traditional screen printing system has the economic advantage of the production speed and cost. The digital textile printing system digitalizes the total process from the design to the printing and omits the separation and engraving. It is more suitable to produce the multiple item-small quantity and add more values to its products. It has also the advantage of less pollution problem.

• Journal of computational fluids engineering
• /
• v.12 no.4
• /
• pp.1-6
• /
• 2007

In the present study, the wind pressure transients on platform screen door in side platforms caused by passing trains have been investigated numerically. The transient compressible 3-D full Navier-Stokes solution is used with actual operational condition of subway train by adopting the moving mesh technique considering the train movement. To achieve more accurate analysis, the entrance and exit tunnel connecting the stations are included in a computational domain with modeling the detailed shape of the train. Numerical analyses are conducted on five operational conditions which include the variation of the train speed, case with or without the train stopped in the other track, and case for two trains passing each other inside the station. The results show that pressure load on platform screen door is maximized when the two trains are passing each other. It is also seen from the computational results that the maximum pressure variation for the cases considered in the present study is found to be satisfactory to various foreign standards.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.3
• /
• pp.163-171
• /
• 2003

To evaluate the performance of the digital radiography(DR) system developed in our group, the modulation transfer function(MTF) was measured and compared with that of an analog X- ray detector, film/screen system. The DR system has an amorphous selenium(a-Se) layer vacuum-evaporated on a TFT flat panel detector. The speed class 400 film/screen (Fuji) system has been being used in the clinical field as analog X-ray detectors. Both the square wave and slit method were used to evaluate their MTF. The square method was applied to both film/screen and the DR system. The slit method, however, was applied to only DR system. The full-width half maximum resolution of film/screen was 357${\mu}{\textrm}{m}$(1.4 lp/mm at 50% spatial frequency), and the resolution of DR was limited to 200${\mu}{\textrm}{m}$(2.5 lp/mm at 30%). These results indicate the measured resolution limitations approximate to the pixel pitch, 139 ${\mu}{\textrm}{m}$ of TFT. The MTF of DR is higher than that of film/screen by the factor of 1.785. It is proved that our a-Se based DR system has potential usefulness in the clinical field.