• Journal of ILASS-Korea
• /
• v.22 no.2
• /
• pp.96-102
• /
• 2017

In order to reduce the NOx, SCR technology is most suitable. In this study, we focused on studying the injector part of urea-SCR system. When stoichiometric 1 mole of urea is injected, 2 moles of $NH_3$ are created. $NH_3$ causes a SCR reaction by reacting with NOx. However, urea is decomposed by the side reaction of coming out HNCO, deposit formation is formed. In this study, it was to design a nozzle that can spray the optimal spray flow rate. Test nozzle used in this experiment is efferverscent type. The result of the experiment, liquid flow rate was confirmed to be that they are dominated by the exit orifice diameter. The area ratio is defined by ratio of the area of exit orifice hole and that of aerorator. The droplet size was measured by varying the area ratios. In addition, it was also confirmed that there is no change of the liquid flow rate and air flow rate to change the aerorator at the same exit orifice. Further, It was confirmed that the droplet size was relatively uniform even though the area ratio was different. Finally, there is little change in the SMD that air flow rate increases in 0.3 or more ALR.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.3
• /
• pp.306-312
• /
• 2005

IMO $NO_x$ levels are generally possible to meet by means of primary on-engine measures. Further significant follow-on reductions are likely to require a secondary after-treatment technique. SCR(Selective Catalytic Reduction) technology is used almost exclusively for $NO_x$ removal in stationary combustion systems. In order to develop a practical SCR system for marine application on board ship, a primary SCR system using urea was made. The SCR system was set up on the ship, 'HANNARA' as a test vessel. employed a two-stroke cycle diesel engine as main propulsion, which is a training ship of Korea Maritime University. The purpose of this paper is to report the results about the basic effects of the below system parameters, The degree of $NO_x$ removal depends on some parameters, such as the amount of urea solution added, space velocity, reaction gas temperature and activity of catalyst.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.1
• /
• pp.123-128
• /
• 2001

The function of SCR system in refuse incineration plant is to reduce the harmful combustion gases especially NOx which make serious environmental pollution. The SCR system normally have a NOx measurement system such as inlet NOx analyzer and outlet T.M.S.(Tele Monitoring System) to control the outlet NOx in stack. The NOx measurement system is very important, however there are frequently happened sensing problems and it need maintenance periodically. In this paper, we propose an estimation method of inlet NOx of SCR system by using general structured observer. The inlet NOx is considered as an input disturbance and it is modelled by applying FFT method in frequency domains. Through the design of general structured observer, the outlet NOx can be estimated by using observation error between real outlet NOx and estimated outlet NOx. The effectiveness of the proposed method is shown by comparing to a measured inlet NOx data.

• Journal of Internet of Things and Convergence
• /
• v.7 no.3
• /
• pp.75-80
• /
• 2021

Since the optimization of the diesel engine for the ship cannot satisfy the NOx emission limit by the method of reducing the NOx emission, it is necessary to reduce the NOx by post-processing the exhaust gas. In this study, we will review the feasibility of designing a binary nozzle and mixing chamber duct for effectively converting the number of elements into NH3 in the oil burner for the SCR catalyst unit integrated duct in the ship under development through the computational heat flow analysis for the velocity distribution and temperature distribution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.18-24
• /
• 2018

The policy-making and technological development of eco-friendly automobiles designed to increase their supply is ongoing, but the internal combustion engine still accounts for about 95% of the automobiles in use. Also, in order to meet the stricter emission regulations of internal combustion engines based on fossil fuels, the proportion of after-treatments for vehicles and (ocean going) vessels is gradually increasing. Natural gas is a clean fuel that emits few air pollutants and has been used mainly as a fuel for city buses. In the long term, we intend to develop a new NGOC/LNT+NGCO/SCR combined system that simultaneously reduces the toxic gases, $CH_4$ and NOx, emitted from CNG buses. The objective of this study is to investigate the characteristics of $de-CH_4/NOx$ according to the ceramic and metal substrates of the SCR (Selective Catalytic Reduction) catalysts mounted downstream of the combined system. The V and Cu-SCR catalysts did not affect the $CH_4$ oxidation reaction, the two NGOC/SCR catalysts each coated with two layers began to oxidize $CH_4$ at $400^{\circ}C$, and the amount of $CH_4$ emitted was reduced to about 20% of its initial value at about $550^{\circ}C$. The two NGOC/SCR catalysts each coated with two layers showed a negative (-) NOx conversion rate above $350^{\circ}C$. The ceramic-based combined system reached LOT50 at $500^{\circ}C$, which was about 20% higher in terms of the $CH_4$ conversion rate than the metal-based combined system, showing that the combined system of NGOC/LNT+Cu-SCR is a suitable combination.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.7
• /
• pp.1043-1053
• /
• 2013

We investigated the ability of soybean curd residue (SCR) and its fermented products to inhibit obesity and improve the blood lipid profiles of obese mice fed a high-fat diet. Samples were prepared by fermenting SCR with Aspergillus oryzae var effuses KACC 44990 (ASCR), a microbe used for the fermentation of traditional Korean Meju, and with Monascus pilosus IFO 4480 (MSCR), a microbe used for the production of red rice. In addition, AMSCR, a mixture composed of equal amounts of ASCR and MSCR, was also prepared. Male mice were divided into six groups and fed with either a normal diet, a high-fat diet, or a high-fat diet supplemented with SCR, ASCR, MSCR, or AMSCR. After 8 weeks, body weight gain, serum and hepatic lipid profiles, and the activities of enzymes that generate or scavenge reactive oxygen species (ROS) were evaluated. Compared with the high-fat diet group, all the test groups showed a significant reduction in body, organ, and epididymal fat weight gain. These effects were observed with supplements in the order AMSCR>ASCR>MSCR>SCR. Similarly, supplements of test samples reduced high levels of serum and hepatic triglycerides (TG), total cholesterol, and low-density lipoprotein (LDL) cholesterol caused by hight-fat diet, while high-density lipoprotein (HDL) cholesterol was increased. Interestingly, the ability of ASCR to lower serum TG was stronger than that of MSCR, while MSCR showed a stronger hypocholesterolemic effect than ASCR. Meanwhile, AMSCR returned comprehensively serum lipid levels to normal. In addition, hepatic damage was prevented with effects in the order AMSCR>ASCR>MSCR>SCR. Hepatic ROS generating system including xanthine oxidase (XO) and ROS scavenging system including superoxide dismutase (SOD), glutathione peroxidase (GPX) and glutathione S-transferase (GST) were recovered to normal level by all test diets. In conclusion, this study suggests that SCR and its fermented products can inhibit obesity and improve lipid profiles.

• Applied Chemistry for Engineering
• /
• v.25 no.5
• /
• pp.474-480
• /
• 2014

In this study, NO oxidation reaction using $Mn/TiO_2$ catalysts was investigated. NO oxidation results revealed that the different trend was observed upon physicochemical properties of $TiO_2$ and interactions between Mn and $TiO_2$ support. $Mn/TiO_2(A)$ catalyst has a superior NO oxidation activity, which increased with decreased space velocity and increased Mn amounts from 10 to 30 wt%. The results indicated that the SCR activity could increase by the fast SCR reaction process using the $Mn/TiO_2(A)$ catalyst located in front of the SCR unit.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.80-86
• /
• 2018

In this paper, we propose a new PNP bipolar insertion type ESD protection circuit with improved electrical characteristics than the existing ESD protection circuits SCR and LVTSCR. The proposed circuit has 8.59V trigger voltage which is about 9V lower than that of the conventional SCR, and the parasitic PNP has one more operation and high robustness characteristics. For the practical design of the proposed ESD protection circuit, the holding voltage was increased by increasing the base length of the parasitic PNP while increasing the variable L. To verify the electrical characteristics of the proposed device, Synopsys T-CAD simulator was used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.650-655
• /
• 2016

In this study, a computational simulation of the internal flow characteristics was carried out for a Urea-SCR Injector. A single hole swirl injector with a swirl disk and slanted nozzle was used in this simulation. The maximum needle lift and opening velocity were selected as the design parameters. To analyze the unsteady internal flow characteristics of the Urea-SCR injector, the moving grid technique was applied to simulate the delicate needle movement. According to the simulation results, the injected mass flow rate from the Urea-SCR injector decreased with increasing needle opening velocity and maximum needle lift. This is because the Urea-solution tends to fill the empty space that the needle previously occupied. The swirl flow is decreased as the flow goes through the injector nozzle, because of the friction with the nozzle wall. Also, during the maximum needle lift period, the swirl coefficient and mean swirl coefficient increase with increasing needle lift. The results of this study may be used as the basic design data of related injectors.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.29.1-29.1
• /
• 2011

The selective catalytic reduction (SCR) of $MnO_x$ with $NH_3$ is an effective method for the removal of $MnO_x$ from stationary system. The typical catalyst for this method is $V_2O_5-WO_3(MoO_3)/TiO_2$, caused by the high activity and stability. However, This catalyst is active within $300{\sim}400^{\circ}C$ and occurs the pore plugging from the deposition of ammonium sulfate salts on the catalysts surface. It needs to locate the SCR unit after the desulfurizer and electrostatic precipitator without reheating of the flue gas as well as deposition of dust on the catalyst. The manganese oxides supported on titania catalysts have attracted interest because of its high SCR activity at low temperature. The catalytic activity of $MnO_x/TiO_2$ SCR catalyst with different manganese precursors have investigated for low-temperature SCR in terms of structural, morphological, and physico-chemical analyses. The $MnO_x/TiO_2$ were prepared from three different precursors such as manganese nitrate, manganese acetate (II), and manganese acetate (III) by the sol-gel method and then it calcinated at $500^{\circ}C$ for 2 hr. The structural analysis was carried out to identify the phase transition and the change intensity of catalytic activity by various manganese precursors was analyzed by FT-IR and Raman spectroscopy. These different precursors also led to various surface Mn concentrations indicated by SEM. The Mn acetate (III) tends to be more suppressive the crystalline phase (rutile), and it has not only smaller particle size, but also better distributed than the others. It was confirmed that the catalytic activity of MA (III)-$MnO_x/TiO_2$ was the highest among them.