DOI QR코드

DOI QR Code

Experimental Study on Spray Characteristics of Twin Fluid Nozzle in Urea-SCR

Urea-SCR에 적용되는 이유체 노즐의 분무특성에 관한 실험적 연구

  • 박형선 (경북대학교 기계공학과) ;
  • 홍정구 (경북대학교 기계공학과)
  • Received : 2017.05.17
  • Accepted : 2017.06.21
  • Published : 2017.06.30

Abstract

In order to reduce the NOx, SCR technology is most suitable. In this study, we focused on studying the injector part of urea-SCR system. When stoichiometric 1 mole of urea is injected, 2 moles of $NH_3$ are created. $NH_3$ causes a SCR reaction by reacting with NOx. However, urea is decomposed by the side reaction of coming out HNCO, deposit formation is formed. In this study, it was to design a nozzle that can spray the optimal spray flow rate. Test nozzle used in this experiment is efferverscent type. The result of the experiment, liquid flow rate was confirmed to be that they are dominated by the exit orifice diameter. The area ratio is defined by ratio of the area of exit orifice hole and that of aerorator. The droplet size was measured by varying the area ratios. In addition, it was also confirmed that there is no change of the liquid flow rate and air flow rate to change the aerorator at the same exit orifice. Further, It was confirmed that the droplet size was relatively uniform even though the area ratio was different. Finally, there is little change in the SMD that air flow rate increases in 0.3 or more ALR.

Keywords

References

  1. 박진우, 박삼식, 구건우, 홍정구, "SCR 촉매의 공간속도 및 선속도가 NOx 제거 효율에 미치는 영향", 한국액체미립화학회지, 제21권, 제3호, 2016, pp. 71-77.
  2. IMO Resolution MEPC. 176 (58), Revised Marpol Annex VI.
  3. A. Azzara, D. Rutherford and H. Wang, "Feasibility of IMO Annex VI Tier III implementation using Selective Catalytic Reduction", The International Council on Clean Transportation, 2014, working paper 2014-4.
  4. 구건우, 정경열, 윤현진, 석지권, 홍정구, "이유체 노즐 미립화 특성이 요소 열분해에 미치는 영향", 한국액체미립화학회지, 제20권, 제3호, 2015, pp. 162-167. https://doi.org/10.15435/JILASSKR.2015.20.3.162
  5. A. M. Bernhard, D. Peitz, M. Elsener, A. Wokaun, and O. Krocher, "Hydrolysis and thermolysis of urea and its decomposition byproducts biuret, cyanuric acid and melamine over anatase $TiO_2$", Appl. Catal., B, Vol. 115-116, 2012, pp. 129-137. https://doi.org/10.1016/j.apcatb.2011.12.013
  6. S. D. Yim, S. J. Kim, J. H. Baik, I. S. Nam, Y. S. Mok, J. H. Lee, B. K. Cho and S. H. Oh, "Decomposition of urea into NH3 for the SCR process", Ind. Eng. Chem. Res., Vol. 43, No. 16, 2004, pp. 4856-4863. https://doi.org/10.1021/ie034052j
  7. 구건우, 홍정구, "저온 반응장에서 요소 수용액의 환원제 전환에 관한 실험적 연구", 한국액체미립화학회지, 제20권, 1호, 2015, pp. 20-27. https://doi.org/10.15435/JILASSKR.2015.20.1.20
  8. S. D. Sovani, P. E. Sojka and A. H. Lefebvre, "Effervescent atomization", Progress in Energy and Combustion Science, Vol. 27, 2001, pp. 483-521. https://doi.org/10.1016/S0360-1285(00)00029-0
  9. 강신명, 김의수, 박설혜, 이지근, "Two-Fluid Urea-SCR 분무노즐의 유동특성 및 분무구조에 관한 실험적 연구", 한국자동차공학회 학술대회 논문집, 2007, pp. 83-88.
  10. 공호정, 홍길화, 황인구, 박심수, 이내현, "디젤 엔진 Urea-SCR 시스템의 Urea Quality가 SCR 촉매의 NOx 정화효율 및 온도변화 특성에 미치는 영향", 대한기계학회 춘추학술대회, 2009, pp. 186-191.
  11. 장재환, 박현철, "박용 탈질 시스템의 혼합기 적용에 따른 요소수용액 분무 및 혼합특성 수치적 연구", 대한기계학회논문집 B권, 제40권, 7호, 2016, pp. 429-434.
  12. 구건우, 홍정구, 박철우, 이충원, "원형 및 타원형 노즐 내부유동과 외부유동의 상관관계", 대한기계학회논문집 B권, 제36권, 제3호, 2012, pp. 325-333.