• 경영과학
• /
• 제28권2호
• /
• pp.17-29
• /
• 2011

The purpose of this paper is to schedule elective surgery patients using a stochastic programming approach and to illustrate how operating room utilization behaves when a decision-maker varies costs associated with utilization. Because of the uncertainty in surgery durations, the underage and overage costs that a decision-maker considers plays an important role in allocating surgery cases into available operating room capacity. We formulate the problem as a stochastic mixed integer programming and propose a sampling-based approximation method for a computational purpose. Newsvendor model is employed to explain the results from numerical experiments that are conducted with the actual data from a hospital. The results show that the operating room utilization is more sensitive when the unit overtime cost is relatively larger than the unit cost for underutilized time.

• 대한설비관리학회지
• /
• 제23권4호
• /
• pp.51-56
• /
• 2018

Computed tomography (CT) scan room in the department of radiology is very necessary to maintain pleasant and proper illuminance to relieve fatigue and inconvenience because it affects the work environment to the radiologist. Accordingly, this paper describes the method for measurement of illuminance that exposed to an environmental elements in a CT scan room of the hospital. Therefore, the purpose of this paper is to propose an optimal environment of CT scan room based on the measurement of illuminance. In addition, the 5 point method by KS C7612 was applied to measure the illuminance with illuminometer (Unfors xi light probe) in the CT scan room. In result of this paper, minimum value and maximum value of illuminance in the CT scan room was measured 212.7 lux and 354.8 lux, respectively. The illuminance of CT scan room was lower than KS A 3011. Finally, the work environment in CT scan room should provide higher illuminance for the comfortable environment of radiologists and patients.

• 대한방사선기술학회지:방사선기술과학
• /
• 제39권3호
• /
• pp.385-390
• /
• 2016

방사성옥소를 이용한 2인 치료격리병실은 환자간의 불필요한 피폭선량을 유발하게 된다. 이에 본 연구에서는 방사성 옥소를 섭취 후 배설 없이 모두 인체에 분포하였다는 가정 하에 방사성 옥소의 물리적 특성 및 생물역동학적 정보를 제외한 보수적인 관점으로 몬테카를로 모의 모사를 이용한 2인 치료격리병실의 안전성을 평가하고자 한다. 실험 결과 방사성옥소에서 방출되는 364 keV의 감마선은 공기층 약 30 cm 또는 납 차폐체 3 mm가 반가층으로 작용됨을 파악할 수 있었으며, 환자간 거리 및 납 차폐체의 두께를 이용하였을 때, 입원기간(48시간)동안 상대방 환자로부터 받게 되는 외부 피폭선량은 5 mSv 이하로 법적 격리 기준선량 보다 낮게 나타남으로써 2인 치료격리병실의 효율적인 관리가 가능한 것으로 분석되었다.

• 한국도서관정보학회지
• /
• 제52권4호
• /
• pp.103-126
• /
• 2021

본 연구는 충청남도교육청 소속 19개 공공도서관을 대상으로 교육·문화복합공간으로서의 도서관 재구조화 방안을 제안하고자 하였다. 이를 위해 국내외 공공기관 복합화 시설의 사례 조사, 이용자 설문조사 등을 실시하였다. 그 결과 미래 공공도서관이 갖추어야 할 공간으로 배우는 공간(종합자료실, 테마 자료 탐구실, 미래교실, 블렌디드 러닝센터, STEAM 교육실, 원격강의학습실), 표현하는 공간(포이어, 메이커 룸, 디지털 매체 창작실, 원격강의제작실), 나누는 공간(동아리·모둠학습실, 웰빙 복합문화공간, 생활·편의공간, 휴게실·브라우징), 즐기는 공간(퍼포먼스·생각 놀이터, 유아·어린이 자료실, 디지털 가상체험실, 특화 알코브실, 야외독서실) 등으로 구분하여 공간 재구조화 전략을 제시하였다. 또한, 건축 규모, 장서 규모, 서비스 및 공간 수준 등을 고려하여 선도모형, 기본모형, 이음터 모형, 최소모형 등 도서관별로 특화된 교육청 소속 공공도서관의 재구조화 모형을 제안하였다.

• 대한물리치료과학회지
• /
• 제9권3호
• /
• pp.141-150
• /
• 2002

Most of physical therapists has thought be exposed themselves to risk of hospital infection but it is reported that have been low concern about infection management. Above like this haven t done systematical education on hospital infection, also physical therapist's information management of infection disease is found very low. It is lack of driving information about disease condition of the patients. Physical therapists has thought their working room may be polluted a lots of micro-organism(%). The control situation of infection waste articles, only 53% responded that the controller has managed very intensive so we can feel to need more intensive It's reported that air culture investigation of physical therapy room has never initiated. To wash the hand, before, after treatment of the patients of physical therapist, is very low frequency. And 73% have responded that the time to wash the hand stays 15-45 second. It is examined that 70% physical therapy room is equipped with washing system, a response of 58% disinfects physical therapy room 1-2times per one month. 36% responded disinfection of treatment modality have done everyday, 25% responded have never done. The location physical therapy room is above one floor - 65%. A response of 57% is ventilation system sufficiency, it is considered that physical therapists needs more efforts on management of hospital infection.

• 한국화재소방학회논문지
• /
• 제13권2호
• /
• pp.3-11
• /
• 1999

ISO 9705 room-corner test 기준에 따른 가연성 내장재의 화재위험성 평가를 위해 개발된 Quintiere 모델의 검증을 위해 이태리 L. S. F의 실대 화재 실험 결과와 비교 분석하였다. ISO 9705 시험은 최초 10분간은 100 kW, 이후 10분간은 300 kW의 화원에 노출된 벽, 천장재의 화염확산 성능 평가방법으로 열 방출비율이 1 MW에 이르면 플레쉬오버가 발생한다고 판단한다. 총 13개의 재료 중 실제 화재 시 용융, 박락, 변형 등이 나타나는 경우는 단위 면적 당 발생 열량 수정 값을 적용하였다. 바탕 면에 계속 부착되어 있는 마감재의 예측결과는 실험 결과에 근접하였다. 또한 Large-scale Test의 실험결과와 모델의 예측성능도 비교 분석하였다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2001년도 추계학술대회
• /
• pp.193-202
• /
• 2001

The individual rotten water purification tank recently discharges wastewater and sewage through the outlet without purification ability. The outlet water and affiliated water purification tank with microorganism cultivator tank cultivates microorganism and then drops the value BOD, COD of sewage and discharges the quality of water into the outlet. The blower and water pump operating continuously prompts the waste of energy and deterioration of equipment. Each room of deposition tank, foaming tank, microorganism cultivator tank is equipment with the sludge detection senses so it can detect the density of each room. The power-drive plant of the blower and water pump which ate the system cultivating the microorganism must be made as fuzzy controlization (If the sludge amount of each room become higher, the rate of operation of blower and water pump must heighten, on the contrary, in case of row sludge amount, the total handling amount and microorganism handling amount of each room of control. Tank reducing the rate of operation must be DB. At present, the blower amount in proportion to the sludge and oxygen demanding amount has to control. Each mom must be checked outlet level of the outlet, also each room must flow backward discharge materials, and must operate feed-back control until we want to be come as a below value of BOD/COD(10PPM ; KS).

• Corrosion Science and Technology
• /
• 제7권3호
• /
• pp.145-151
• /
• 2008

Material degradation such as high temperature oxidation of metallic material is a severe problem in energy generation systems or manufacturing industries. The metallic materials are oxidized to form oxide films in high temperature environments. The oxide films act as diffusion barriers of oxygen and metal ions and thereafter decrease oxidation rates of metals. The metal oxidation is, however, accelerated by mechanical fracture and spalling of the oxide films caused by thermal stresses by repetition of temperature change, vibration and by the impact of solid particles. It is therefore very important to investigate mechanical properties and adhesion of oxide films in high temperature environments, as well as the properties in a room temperature environment. The oxidation tests were conducted for Ni and Ni-Co alloy under high temperature corrosive environments. The hardness distributions against the indentation depth from the top surface were examined at room temperature. Dynamic indentation tests were performed on Ni oxide films formed on Ni surfaces at room and high temperature to observe fractures or cracks generated around impact craters. As a result, it was found that the mechanical property as hardness of the oxide films were different between Ni and Ni-Co alloy, and between room and high temperatures, and that the adhesion of Ni oxide films was relatively stronger than that of Co oxide films.

• 유통과학연구
• /
• 제19권1호
• /
• pp.5-15
• /
• 2021

Purpose: This study explores the types of relational benefits that generate loyalty to room-sharing services among Chinese customers based on the relationship marketing literature. The study also examines the moderating effect of alternative attractiveness on this relationship. Research design, data and methodology: Based on research hypotheses, questionnaires with items measuring the proposed constructs in three dimensions, including relational benefits, alternative attractiveness, and customer loyalty, were designed to test the hypotheses. Data were collected via an online questionnaire of 220 room-sharing service customers in China. Results: Results verify the effects of relational benefits on customers' loyalty to room-sharing services and the mediating effect of alternative attractiveness. More specifically, confidence, social, and safety benefits positively affect customer loyalty to room-sharing services, and alternative attractiveness moderates only the effect of social benefits. Conclusions: The results suggest that room-sharing service providers should concentrate on providing confidence, social, and safety benefits to maintain long-term relationships with customers. This study also provides practical implication for building relationships between channel members in service distribution channels. The study concludes that without customer relationships marketing for managing collaborative and social communication channels, the entire distribution channel might lose out eventually.

• 전기화학회지
• /
• 제5권4호
• /
• pp.178-182
• /
• 2002

The electrochemical behavior of binder-free carbon anode, comprising of only artificial and natural graphite (AG and NG) particles, for intercalation and deintercalation of lithium ion $(Li^+)$ in aluminum chloride (AICI_3)-I-ethyl­3-methylimidazolium chloride (EMIC)-lithium chloride (LiCl)-thionyl chloride $(SOCI_2)$ room-temperature molten salt (RTMS) was studied. Binder-free carbon electrodes were fabricated using electrophoretic deposition (EPD) method. The binder-free carbon anodes provided a relatively flat charge and discharge potentials $(0\;to\;0.2V\;vs.\;Li/Li^+)$ and current capabilities $(250-340mAh{\cdot}g^{-1})$ for the intercalation and deintercalation of $Li^+$. Stability of the binder-free carbon anodes for intercalation and deintercalation of 50 cycles was confirmed.