• Title/Summary/Keyword: Science and Technology Trends

Search Result 1,460, Processing Time 0.048 seconds

Changes in the Linear Compressibility and Bulk Modulus of Natural Stilbite Under Pressure with Varying Pressure-Transmitting Media (천연 스틸바이트의 압력전달매개체에 따른 선형압축률 및 체적탄성률 비교 연구)

  • Hwang, Huijeong;Lee, Hyunseung;Lee, Soojin;Jung, Jaewoo;Lee, Yongmoon
    • Korean Journal of Mineralogy and Petrology
    • /
    • v.35 no.3
    • /
    • pp.367-376
    • /
    • 2022
  • This study is a preliminary step to understand the reaction between various liquids and zeolite in the subduction zone environment. Stilbite, NaCa4(Al9Si27)O72·28(H2O), was selected and high pressure study was conducted on compressional behavior by the pressure-transmitting medium (PTM). Water and NaHCO3 solution that can exist in the subduction zone was used as PTM, and samples were pressurized from ambient to a maximum of 2.5 GPa. Below 1.0 GPa, both experiments show a low linear compressibility in the range of 0.001 to 0.004 GPa-1 and a high bulk modulus of 220(1) GPa. This is presumably because the structure of the stilbite becomes very dense due to insertion of water molecules or cations into the channel. On the other hand, at 1.0 GPa or higher, the trends of the two experiments are different. In the water run, the linear compressibility of the c-axis is increased to 0.006(1) GPa-1. In the NaHCO3 run, the linear compressibility of the b- and c-axis is increased to 0.006(1) GPa-1. The bulk modulus after 1.0 GPa shows values of 40(1) and 52(7) GPa in water and NaHCO3 run, respectively, confirming that stilbite becomes more compressible than that before 1.0 GPa. It is caused by the migration of cations and water molecules inside the channel, as the water molecules in the PTM start to freeze and stop to insert toward the channel at 1.0 GPa or more. In the NaHCO3 run, it is assumed that the distribution of extra-framework species inside the structure is changed by substitution of the Na+ cation. It can be expected from tendency of the relative intensity ratio of the (001) and (020) peaks which show a different from that of the water run.

Processing of Cheonggukjang using soybean powder (콩 분말을 이용한 청국장 제조 기술 개발)

  • Jeong, Yeon-Shin;Dhakal, Krishna Hari;Hwang, Young-Hyun
    • Current Research on Agriculture and Life Sciences
    • /
    • v.29
    • /
    • pp.43-53
    • /
    • 2011
  • The possibility of making Cheongukjang by the use of soy-powder and pill type re-made from soy-powder was investigated. Some of experimental results obtained are summarized as follows; 1. Regardless of three different types for the source material of Cheonggukjang, soybean seed, soy-power, and pill, the dry weight of fermented Cheonggukjang showed continuously decreasing trends along with the time of fermentation applied. 2. In all type of source materials, the length of viscous substance during fermentation was increased along with the time of fermentation, and the rate of elongation was much reduced after 48hr of fermentation. Out of four soybean varieties tested, Taekwangkong produced longest viscous substance fermented in the type of soybean seed. No viscous substance was formed when the depth of soy-powder in the fermentation box was shallow, one centimeter. 3. Not much difference was observed in the number of microbes, Bacillus licheniformis B1, in all soybean varieties. The number was proportionally increased in the type of powder but it increased rapidly from 12 hour to 24 hour with low rate of increase thereafter in the pill type. 4. Along with the time of fermentation in all types, the color of Cheonggukjang changed from yellow to dull. At the same time, the tone of color and chroma changed into reddish and yellow, respectively. 5. Along with the time of fermentation in all types, pH of Cheonggukjang changed in alkali. 6. Along with the time of fermentation, the content of isoflavone in Cheonggukjang increased by 48hr but decreased thereafter. 7. In general, the quality of Cheonggukjang fermented in types of soy-powder and pill re-made from soy-powder was lower than that of soybean seed. More study is seemed to be needed to produce high quality Cheonggukjang by the use of soy-power.

  • PDF

A Design Direction for Mobile phones between Comparison of Users from Korea, China and Japan (한중일 사용자 비교분석을 통한 모바일폰 디자인 방향)

  • Eune, Ju-Hyun;Jung, Hee-Yun;Kim, Yun-Jun
    • Archives of design research
    • /
    • v.20 no.3 s.71
    • /
    • pp.29-38
    • /
    • 2007
  • The competition to capture a larger slice of the market in Mobile Communication business is increasing among companies. In order to achieve and maintain a competitive advantage in the Asian market, it is critical to continue to develop new technology. Understanding the underlying distinctive characteristics and needs of each market and the cultural backgrounds that drive those needs is a necessary focus. Companies with marketing strategies based on a correct understanding of market needs will capture dominant positions in the market. The purpose of this study is to identify those differences in user behavior and cultural tendencies among different people in different countries in the mobile telecommunication market. This research is based on an on-line survey in three countries (Korea, China, and Japan). Below are the contents of the survey on the mobile phone based on: 1) User behavior 2) Design preference 3) Purchasing behavior 4) User awareness on manufacturer brand. Through the analysis of this questionnaire it is possible to identify the differences and similarities among countries dearly. 1) Cultural trends and perceptions related to mobile phone usage were largely caused by differences in the state of technology, policies and business strategies of mobile sonics carriers and manufacturers, and national tendencies, of each country. 2) Korean and Japanese users produced similar responses to the questions related to advanced technology, whereas Korean and Chinese users responded similarly to national tendency-related questions. 3) To the questions related to business strategies of mobile service carriers and manufacturers, users in all three countries displayed markedly different responses. Once again, accurate analysis of the differences and similarities related to mobile phone usage in each country will help the companies in this industry to gain a competitive edge in the market. This study should not stop at simple comparison but be a framework for giving companies a dear future direction for technological development.

  • PDF

Analysis of the Characteristics of Korean Mushroom Exports (2008-2022) (한국의 버섯 수출의 특징 분석(2008~2022))

  • Woo-Sik Jo;Chang-Yun Lee;Young-Hyun Rew;Hun-Joong Kweon
    • Journal of Mushroom
    • /
    • v.21 no.1
    • /
    • pp.1-7
    • /
    • 2023
  • This study addresses the current demand of the Korean mushroom export industry to establish an export strategy and governing policies.The enoki mushroom exports increased by 89% in 2009 and 23% in 2010, resulting in the largest export volume (17,163 tons) and export value ($26,292,000) being recorded in 2010. In contrast, exports in 2020 yielded only $18,525,000, which was 29% lower than that in 2010. In case of king oyster mushrooms, exports increased by 10% in 2012, 13% in 2013, and 2% in 2014, maintaining a moderate-growth trend. Moreover, Korea's mushroom exports are focused on a few specific countries. Enoki mushrooms accounted for more than 50% of the total exports to North America and Vietnam from 2012 to 2022, whereas king oyster mushrooms accounted for more than 50% of the total exports to Europe and North America (USA and Canada) from 2009 to 2022. Another characteristic trend in Korean mushroom exports is the diversification of export markets. The number of countries importing enoki mushrooms and king oyster mushrooms from Korea is increasing.

Soil Chemical Property, Mortality Rates and Growth of Planting Trees from Soil Covering Depths in Coastal Reclaimed Land of Asan Area (아산지역 해안매립지의 복토높이에 따른 토양화학성, 수목 고사율 및 생장 특성)

  • Byun, Jae-Kyeong;Kim, Choon-Sig;Lim, Chae-Cheol;Jeong, Jin-Hyon
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.44 no.3
    • /
    • pp.502-509
    • /
    • 2011
  • It is important to determine optimum soil covering depths for tree survival and growth because soil covering depths for establishing tree planting bases in coastal reclaimed lands are related to the costs for soil collection, transportation and land reclamation. The objectives of this study were carried out to determine optimum soil covering depths for the normal growth of planted trees in a coastal reclaimed land. The study sites were located in Asan National Industrial Complex in Pyeongtaek City, Gyeonggi-do. Four tree species (Pinus thunbergii, Chamaecyparis pisifera, Zelkova serrata, Quercus acutissima) with one hundred eighty trees of each species were planted in various depths of soil covering (no soil covering, 0.5 m, 1.5 m, 2.0 m soil covering treatments) on April 1998, and the tree growth patterns were measured on September 2000. The change of soil properties, tree mortality rate, root collar diameter and height growth were measured from each soil covering depth treatment on September 2000. Soil pH, EC, exchangeable cations ($K^+$, $Na^+$, $Ca^{2+}$, $Mg^{2+}$), anion $Cl^-$, and base saturation increased with decreased soil covering depths. The mortality rates of tree species showed decreased with increased soil covering depths. The height growth of tree species increased with increased soil covering depths. Height growth of Pinus thunbergii was significantly different between the soil covering depth below 0.5m and other three covering depths, while the growth of other species (C. pisifera, Z. serrata, Q. acutissima) was significantly higher in soil covering depths below 1.5 m than in other soil covering depth treatments. The root collar diameter growth of all tree species showed increasing trends with increased soil covering depths. It is recommended to cover the soil depths above 1.5 m to decrease mortality and to stimulate the tree growth of C. pisifera, Z. serrata and Q. acutissima, while P. thunbergii which is a salt tolerate species could be planted in the 1.0 m soil covering depth.

3T MR Spin Echo T1 Weighted Image at Optimization of Flip Angle (3T MR 스핀에코 T1강조영상에서 적정의 숙임각)

  • Bae, Sung-Jin;Lim, Chung-Hwang
    • Journal of radiological science and technology
    • /
    • v.32 no.2
    • /
    • pp.177-182
    • /
    • 2009
  • Purpose : This study presents the optimization of flip angle (FA) to obtain higher contrast to noise ratio (CNR) and lower specific absorption rate (SAR). Materials and Method : T1-weighted images of the cerebrum of brain were obtained from 50$^\circ$ to 130$^\circ$ FA with 10$^\circ$ interval. Signal to noise ratios (SNRs) were calculated for white matter (WM), gray matter (GM), and background noise. The proper FA was analyzed by T-test statistics and Kruskal-wallis analysis using R1 = 1- exp ($\frac{-TR}{T1}$) and Ernst angle cos $\theta$ = exp ($\frac{-TR}{T1}$). Results : The SNR of WM at 130$^\circ$ FA is approximately 1.6 times higher than the SNR of WM at 50$^\circ$. The SNR of GM at 130$^\circ$ FA is approximately 1.9 times higher than the SNR of GM at 50$^\circ$. Although the SNRs of WM and GM showed similar trends with the change of FA values, the slowdown point of decrease after linear fitting were different. While the SNR of WM started decreasing at 120$^\circ$ FA, the SNR of GM started decreasing at less than 110$^\circ$. The highest SNRs of WM and GM were obtained at 130$^\circ$ FA. The highest CNRs, however, were obtained at 80$^\circ$ FA. Conclusion : Although SNR increased with the change of FA values from 50$^\circ$ to 130$^\circ$ at 3T SE T1WI, CNR was higher at 80$^\circ$ FA than at the usually used 90$^\circ$ FA. In addition, the SAR was decreased by using smaller FA. The CNR can be increased by using this optimized FA at 3T MR SE T1WI.

  • PDF

Influence of Fertilizer Type on Physiological Responses during Vegetative Growth in 'Seolhyang' Strawberry (생리적 반응이 다른 비료 종류가 '설향' 딸기의 영양생장에 미치는 영향)

  • Lee, Hee Su;Jang, Hyun Ho;Choi, Jong Myung;Kim, Dae Young
    • Horticultural Science & Technology
    • /
    • v.33 no.1
    • /
    • pp.39-46
    • /
    • 2015
  • Objective of this research was to investigate the influence of compositions and concentrations of fertilizer solutions on the vegetative growth and nutrient uptake of 'Seolhyang' strawberry. To achieve this, the solutions of acid fertilizer (AF), neutral fertilizer (NF), and basic fertilizer (BF) were prepared at concentrations of 100 or $200mg{\cdot}L^{-1}$ based on N and applied during the 100 days after transplanting. The changes in chemical properties of the soil solution were analysed every two weeks, and crop growth measurements as well as tissue analyses for mineral contents were conducted 100 days after fertilization. The growth was the highest in the treatments with BF, followed by those with NF and AF. The heaviest fresh and dry weights among treatments were 151.3 and 37.8 g, respectively, with BF $200mg{\cdot}L^{-1}$. In terms of tissue nutrient contents, the highest N, P and Na contents, of 3.08, 0.54, and 0.10%, respectively, were observed in the treatment with NF $200mg{\cdot}L^{-1}$. The highest K content was 2.83%, in the treatment with AF $200mg{\cdot}L^{-1}$, while the highest Ca and Mg were 0.98 and 0.42%, respectively, in BF $100mg{\cdot}L^{-1}$. The AF treatments had higher tissue Fe, Mn, Zn, and Cu contents compared to those of NF or BF when fertilizer concentrations were controlled to equal. During the 100 days after fertilization, the highest and lowest pH in soil solution of root media among all treatments tested were 6.67 in BF $100mg{\cdot}L^{-1}$ and 4.69 in AF $200mg{\cdot}L^{-1}$, respectively. The highest and lowest ECs were $5.132dS{\cdot}m^{-1}$ in BF $200mg{\cdot}L^{-1}$ and $1.448dS{\cdot}m^{-1}$ in BF $100mg{\cdot}L^{-1}$, respectively. For the concentrations of macronutrients in the soil solution of root media, the AF $200mg{\cdot}L^{-1}$ treatment gave the highest $NH_4$ concentrations followed by NF $200mg{\cdot}L^{-1}$ and AF $100mg{\cdot}L^{-1}$. The K concentrations in all treatments rose gradually after day 42 in all treatments. When fertilizer concentrations were controlled to equal, the highest Ca and Mg concentrations were observed in AF followed by NF and BF until day 84 in fertilization. The BF treatments produced the highest $NO_3$ concentrations, followed by NF and AF. The trends in the change of $PO_4$ concentration were similar in all treatments. The $SO_4$ concentrations were higher in treatments with AF than those with NF or BF until day 70 in fertilization. These results indicate that compositions of fertilizer solution should to be modified to contain more alkali nutrients when 'Seolhyang' strawberry is cultivated through inert media and nutri-culture systems.

Development of the Regulatory Impact Analysis Framework for the Convergence Industry: Case Study on Regulatory Issues by Emerging Industry (융합산업 규제영향분석 프레임워크 개발: 신산업 분야별 규제이슈 사례 연구)

  • Song, Hye-Lim;Seo, Bong-Goon;Cho, Sung-Min
    • Journal of Intelligence and Information Systems
    • /
    • v.27 no.3
    • /
    • pp.199-230
    • /
    • 2021
  • Innovative new products and services are being launched through the convergence between heterogeneous industries, and social interest and investment in convergence industries such as AI, big data-based future cars, and robots are continuously increasing. However, in the process of commercialization of convergence new products and services, there are many cases where they do not conform to the existing regulatory and legal system, which causes many difficulties in companies launching their products and services into the market. In response to these industrial changes, the current government is promoting the improvement of existing regulatory mechanisms applied to the relevant industry along with the expansion of investment in new industries. This study, in these convergence industry trends, aimed to analysis the existing regulatory system that is an obstacle to market entry of innovative new products and services in order to preemptively predict regulatory issues that will arise in emerging industries. In addition, it was intended to establish a regulatory impact analysis system to evaluate adequacy and prepare improvement measures. The flow of this study is divided into three parts. In the first part, previous studies on regulatory impact analysis and evaluation systems are investigated. This was used as basic data for the development direction of the regulatory impact framework, indicators and items. In the second regulatory impact analysis framework development part, indicators and items are developed based on the previously investigated data, and these are applied to each stage of the framework. In the last part, a case study was presented to solve the regulatory issues faced by actual companies by applying the developed regulatory impact analysis framework. The case study included the autonomous/electric vehicle industry and the Internet of Things (IoT) industry, because it is one of the emerging industries that the Korean government is most interested in recently, and is judged to be most relevant to the realization of an intelligent information society. Specifically, the regulatory impact analysis framework proposed in this study consists of a total of five steps. The first step is to identify the industrial size of the target products and services, related policies, and regulatory issues. In the second stage, regulatory issues are discovered through review of regulatory improvement items for each stage of commercialization (planning, production, commercialization). In the next step, factors related to regulatory compliance costs are derived and costs incurred for existing regulatory compliance are calculated. In the fourth stage, an alternative is prepared by gathering opinions of the relevant industry and experts in the field, and the necessity, validity, and adequacy of the alternative are reviewed. Finally, in the final stage, the adopted alternatives are formulated so that they can be applied to the legislation, and the alternatives are reviewed by legal experts. The implications of this study are summarized as follows. From a theoretical point of view, it is meaningful in that it clearly presents a series of procedures for regulatory impact analysis as a framework. Although previous studies mainly discussed the importance and necessity of regulatory impact analysis, this study presented a systematic framework in consideration of the various factors required for regulatory impact analysis suggested by prior studies. From a practical point of view, this study has significance in that it was applied to actual regulatory issues based on the regulatory impact analysis framework proposed above. The results of this study show that proposals related to regulatory issues were submitted to government departments and finally the current law was revised, suggesting that the framework proposed in this study can be an effective way to resolve regulatory issues. It is expected that the regulatory impact analysis framework proposed in this study will be a meaningful guideline for technology policy researchers and policy makers in the future.

Effct of Species and Tedding Frequency on the Quality of Annual Legume Hay in Spring (초종 및 반전횟수가 봄철 일년생 콩과목초 건초의 품질에 미치는 영향)

  • Kim, J.D.;Kwon, C.H.;Kim, H.J.;Kim, M.G.
    • Journal of Animal Science and Technology
    • /
    • v.46 no.3
    • /
    • pp.451-458
    • /
    • 2004
  • No comprebensive forage quality of annual legumes harvested and cured in spring has been conducted in Korea. Therefore, this experiment was carried out to gain information on the quality of crimson clover (Trifolium incarnatum L.), bolta baIansa clover(Trifolium ba/anansae L.), and persian c1over(Trifolium resupinatum L.) during field curing in spring. The dry matter content of crimson clover at harvest was 24.7%, while bolta balansa and persian clovers had 20.4 and 18.8%, respectively. The moisture content of persian clover was low at the final curing day. But All species took 4 days to reach moisture content under 20%Tedding frequency did not affect moisture content, but consisten trends were also observed during the field curing. Persian clover tended to show a higher leaf-stem ratio than crimson and bolta balansa clovers on dry matter basis. Crude protein of persian clover(19.5%) was higher than other legumes. The percentage of erode protein was decreased from 17.8 to 16.5% as tedding frequency often did. Neutral detergent fiber(NDF) and acid detergent fiber(ADF) contents of persian clover were lower than those of other legumes. From the comparison among tedding frequency, NDF and ADF contents of three times were higher than those of one and two times. Relative feed value(RFV) of persian clover hay was the highest(178) and classified as Grade Prime in forage quality standard. Crimson and bolta balansa clovers in the RFV were also high quality as Grade 1 in forage quality standard. The RFV of legume hay was decreased from 150 to 140 as tedding frequency often did Results of the experiment indicate that hay quality of persian clover was higher than other clovers. And this is due to high leaf and stem content, hollow stem and late maturity stage. Then tedding frequency in annual legume can be teded by two times for quality.

An Analysis of Ginseng Advertisements in 1920-1930s Newspapers During Japanese Colonial Period (일제강점기 중 1920-1930년대 신문에 실린 인삼 광고 분석)

  • Oh, Hoon-Il
    • Journal of Ginseng Culture
    • /
    • v.4
    • /
    • pp.103-127
    • /
    • 2022
  • The influx of modern culture in the early 20th century in Korea led to numerous changes in the country's ginseng industry. With the development of ginseng cultivation technology and commerce, the production and consumption of ginseng increased, and various ginseng products were developed using modern manufacturing technology. Consequently, competition for the sales of these products became fierce. At that time, newspaper advertisements showed detailed trends in the development and sales competition of ginseng products. Before 1920, however, there were few advertisements of ginseng in newspapers. This is thought to be because newspapers had not yet been generalized, and the ginseng industry had not developed that much. Ginseng advertisements started to revitalize in the early 1920s after the launch of the Korean daily newspapers Dong-A Ilbo and Chosun Ilbo. Such advertisements in this period focused on emphasizing the traditional efficacy of Oriental medicine and the mysterious effects of ginseng. There were many advertisements for products that prescribed the combination of ginseng and deer antler, indicating the great popularity of this prescription at the time. Furthermore, advertisements showed many personal experience stories about taking such products. Mail order and telemarketing sales were already widely used in the 1920s . In 1925, there were advertisements that ginseng products were delivered every day. The advertisements revealed that ginseng roots were classified more elaborately than they are now according to size and quality. Ginseng products in the 1920s did not deviate significantly from the scope of traditional Oriental medicine formulations such as liquid medicine, pill, and concentrated extract. In the 1930s, ginseng advertisements became more active. At this time, experts such as university professors and doctors in medicine or in pharmacy appeared in the advertisements. They recommended ginseng products or explained the ingredients and medicinal effects of the products. Even their experimental notes based on scientific research results appeared in the advertisements to enhance the reliability of the ginseng products. In 1931, modern tablet advertisements appeared. Ginseng products supplemented with vitamins and other specific ingredients as well as ginseng thin rice gruel for the sick appeared at this time. In 1938, ginseng advertisements became more popular, and advertisements using talents as models, such as dancer Choi Seunghee or famous movie stars, models appeared. Ginseng advertisements in the 1920s and 1930s clearly show a side of our rapidly changing society at the time.