• Earthquakes and Structures
• /
• 제4권5호
• /
• pp.527-555
• /
• 2013

This paper proposes probabilistic models for estimating the seismic demands on reinforced concrete (RC) bridges with base isolation. The models consider the shear and deformation demands on the bridge columns and the deformation demand on the isolation devices. An experimental design is used to generate a population of bridges based on the AASHTO LRFD Bridge Design Specifications (AASHTO 2007) and the Caltrans' Seismic Design Criteria (Caltrans 1999). Ground motion records are used for time history analysis of each bridge to develop probabilistic models that are practical and are able to account for the uncertainties and biases in the current, common deterministic model. As application of the developed probabilistic models, a simple method is provided to determine the fragility of bridges. This work facilitates the reliability-based design for this type of bridges and contributes to the transition from limit state design to performance-based design.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 제14회 신호처리 합동 학술대회 논문집
• /
• pp.971-974
• /
• 2001

Multi-Carrier Spread Spectrum communications has shown the ability of transform domain excision using the wavelet transformation to improve system performance when transmitting signals in the presence of additive white Gaussian noise and interference. In such work, the transforms were implemented using FIR filters and IIR filter. Some well-known classes of sequences, such as Pseudo noise, Walsh, Cold sequences are evaluated with respect to the basic criteria. The main objective is to implement the wavelet transform using IIR filters. This filters are well known to have sharper transition regions leading to better performance. Numerical simulation of multi-carrier spread spectrum communication systems have shown that IIR filters are better in removing the sinusoidal jammer and subsequently yield better BER performance.

• 대한수학교육학회지:수학교육학연구
• /
• 제10권1호
• /
• pp.85-102
• /
• 2000

The concept of variables is central to mathematics teaching and learning in junior and senior high school. Understanding the concept provides the basis for the transition from arithmetic to algebra and necessary for the meaningful use of all advanced mathematics. Despite the importance of the concept, however, much has been written in the last decade concerning students' difficulties with the concept. This Thesis is based on research to investigate the hypothesis that LOGO programming will contribute to 6th grader' learning of variables. The aim of the research were to; .investigate practice on pupils' understanding of variables before the activity with a computer; .identify functions of LOGO programming in pupils' using and understanding of variable symbols, variable domain and the relationship between two variable dependent expressions during the activity using a computer; .investigate the influence of pupils' mathematical belief on understanding and using variables. The research consisted predominantly of a case study of 6 pupils' discourse and activities concerning variable during their abnormal lessons and interviews with researcher. The data collected for this study included video recordings of the pupils'work with their spoken language.

• 한국가시화정보학회지
• /
• 제21권2호
• /
• pp.24-33
• /
• 2023

This work is to observe the wake flow generated behind a ramp. We have conducted a large eddy simulation with two ramp models having different heights with two different inflow conditions. Reynolds number based on the height of the large ramp (LR) and small ramp (SR) are Re_h = 2.8×10⁴ and 1.4×10⁴ respectively. The wake flow visualization shows the formation of streamwise counter-rotating vortices pairs at the downstream of the obstacle. These primary vortices are stretched and lifted up when moving downstream. In order to observe the effect of the inflow condition on the wake transition, two different inlet flow conditions are given on the inlet section as an inlet boundary condition. Induced counter-rotating vortices pairs due to sharp-edged triangular ramp obstacles are developed and propagated downstream. In the result, the large ramp shows a more complicated wake structure of the boundary layer than the small ramp.

• 한국정보과학회논문지:시스템및이론
• /
• 제26권11호
• /
• pp.1414-1428
• /
• 1999

ATM/B-ISDN 신호 프로토콜과 같은 통신 프로토콜의 상호운용성을 시험하기 위한 시험경우를 생성하는 알고리즘이 제안되었다 1]. 현재까지 상호운용성 시험경우 도출을 자동화하거나 이에 대한 커버리지를 분석한 경우는 없다. 본 논문은 1]에서 제안한 알고리즘을 프로그램으로 구현하여 TCP 연결설정 프로토콜에 적용하고 결과를 분석한다. 이 과정에서 (1) TCP 연결설정 프로토콜의 3방향 핸드 쉐이킹 부분을 다루지 못했던 기존의 알고리즘을 개선하고, (2) 개선된 알고리즘을 프로그램으로 구현하여 TCP 연결설정 프로토콜의 상호운용성 시험경우를 도출하고, (3) 생성된 상호운용성 시험경우를 트랜지션 커버리지 관점에서 분석하고, (4) 향상된 트랜지션 커버리지를 얻기 위하여 알고리즘 확장 방안을 제시한다.Abstract A test derivation method suitable for testing interoperability for the class of communication protocols like the ATM/B-ISDN signaling protocol was proposed 1]. Up to now, there is no work on automating derivation of the interoperability test suite and analyzing its coverage. In this paper, we implement the algorithm proposed by 1], apply it to the Transmission Control Protocol (TCP), and analyze its results. In this process, we (1) improve the algorithm that is not applicable to the TCPs three-way handshaking, (2) implement the improved algorithm as a program and derive an interoperability test suite automatically from a given pair of TCP FSMs, (3) analyze generated interoperability test suite in view of transition coverage, and (4) present a method in order to extend the algorithm for better transition coverage.

• Corrosion Science and Technology
• /
• 제14권3호
• /
• pp.120-126
• /
• 2015

The usage of bending products recently have increased since many industries such as automobile, aerospace, shipbuilding, and chemical plants need the application of pipings. Bending process is one of the inevitable steps to fabricate the facilities. Induction heat bending is composed of compressive bending process by local heating and cooling. This work focused on the effect of induction heat bending process on the properties of ASME SA312 Gr. TP304 stainless steel pipes. Tests were performed for base metal and bended area including extrados, intrados, crown up, and down parts. Microstructure was analyzed using an optical microscope and SEM. In order to determine intergranular corrosion resistance, Double Loop Electrochemical Potentiokinetic Reactivation (DL-EPR) test and ASTM A262 practice A and C tests were done. Every specimen revealed non-metallic inclusion free under the criteria of 1.5i of the standard and the induction heat bending process did not affect the non-metallic inclusion in the alloys. Also, all the bended specimens had finer grain size than ASTM grain size number 5 corresponding to the grain sizes of the base metal and thus the grain size of the pipe bended by induction heat bending process is acceptable. Hardness of transition start, bend, and transition end areas of ASME SA312 TP304 stainless steel was a little higher than that of base metal. Intergranular corrosion behavior was determined by ASTM A262 practice A and C and DL-EPR test, and respectively step structure, corrosion rate under 0.3 mm/y, and Degree of Sensitization (DOS) of 0.001~0.075% were obtained. That is, the induction heat bending process didn't affect the intergranular corrosion behavior of ASME SA312 TP304 stainless steel.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권6호
• /
• pp.781-792
• /
• 2016

This paper presents a new approach to enhance the data retention of logic-compatible embedded DRAMs. The memory bit-cell in this work consists of two logic transistors implemented in generic triple-well CMOS process. The key idea is to use the parasitic junction capacitance built between the common cell-body and the data storage node. For each write access, a voltage transition on the cell-body couples up the data storage levels. This technique enhances the data retention and the read performance without using additional cell devices. The technique also provides much strong immunity from the write disturbance in the nature. Measurement results from a 64-kbit eDRAM test chip implemented in a 130 nm logic CMOS technology demonstrate the effectiveness of the proposed circuit technique. The refresh period for 99.9% bit yield measures $600{\mu}s$ at 1.1 V and $85^{\circ}C$, enhancing by % over the conventional design approach.

• Structural Engineering and Mechanics
• /
• 제78권2호
• /
• pp.163-174
• /
• 2021

Track-bridge interaction has become an essential part in the design of bridges and rails in terms of modern railways. As a unique ballastless slab track, the longitudinal continuous slab track (LCST) or referred to as the China railway track system Type-II (CRTS II) slab track, demonstrates a complex force mechanism. Therefore, a comprehensive track-bridge interaction study between multi-span simply supported beam bridges and the LCST is presented in this work. In specific, we have developed an integrated finite element model to investigate the overall interaction effects of the LCST-bridge system subjected to the actions of temperature changes, traffic loads, and braking forces. In that place, the deformation patterns of the track and bridge, and the distributions of longitudinal forces and the interfacial shear stress are studied. Our results show that the additional rail stress has been reduced under various loads and the rail's deformation has become much smoother after the transition of the two continuous structural layers of the LCST. However, the influence of the temperature difference of bridges is significant and cannot be ignored as this action can bend the bridge like the traffic load. The uniform temperature change causes the tensile stress of the concrete track structure and further induce cracks in them. Additionally, the influences of the friction coefficient of the sliding layer and the interfacial bond characteristics on the LCST's performance are discussed. The systematic study presented in this work may have some potential impacts on the understanding of the overall mechanical behavior of the LCST-bridge system.

• Journal of Electrochemical Science and Technology
• /
• 제6권1호
• /
• pp.16-25
• /
• 2015

Transition metal oxide nanocrystalline materials are playing major role in energy storage application in this scenario. Nickel oxide is one of the best antiferromagnetic materials which is used as electrodes in energy storage devices such as, fuel cells, batteries, electrochemical capacitors, etc. In this research work, nickel oxide nanoparticles were synthesized by combustion route in presence of organic fuels such as, glycine, glucose and and urea. The prepared nickel oxide nanoparticles were calcined at 600℃ for 3 h to get phase pure materials. The calcined nanoparticles were preliminarily characterized by XRD, particle size analysis, SEM and EDAX. To prepare nickel oxide electrode materials for application in supercapacitors, the calcined NiO nanoparticles were mixed with di-methyl-acetamide and few drops of nafion solution for 12 to 16 h. The above slurry was coated in the graphite sheet and dried at 50℃ for 2 to 4 h in a hot air oven to remove organic solvent. The dried sample was subjected to electrochemical studies, such as cyclic voltammetry, AC impedance analysis and chrono-coulometry studies in KOH electrolyte medium. From the above studies, it was found that nickel oxide nanoparticles prepared by combustion synthesis using glucose as a fuel exhibited resulted in low particle diameter (42.23 nm). All the nickel oxide electrodes have shown better good capacitance values suitable for electrochemical capacitor applications.

• Journal of Korea Trade
• /
• 제25권4호
• /
• pp.128-145
• /
• 2021

Purpose - The main purpose of this study is thus to investigate the contingent effect of imitation strategies on firm performance in transition economies such as China, focusing on pure and creative imitation. Design/methodology - We conducted a survey targeting department heads of each company who have more than 10 years work experiences. We assessed that the ability to gain trust and to access information from high-ranking informants would be greater if the firms were from the same country - Korea - as the lead researcher. A total of 200 highly reliable samples were obtained, which could effectively explain the nine variables set in the study. Relevant hypotheses were tested using a hierarchical linear model (HLM). Findings - The findings suggest that SMEs' technology level also had a positive impact on performance. Firms with better technology had a positive impact on performance, irrespective of pure or creative imitation. This reflects the cases where many Korean SMEs entering China without high technology level lose their competitiveness due to Chinese firms' technology catch-up within a short period of time. Originality/value - SMEs that lack technology and know-how need to focus on pure imitation strategies. It is possible that SMEs can perform creative imitation, but it seems difficult under the current circumstances. Therefore, SMEs with limitations in technology and know-how should maintain their competitive advantage for a while, by maintaining their pure imitation strategy.