• 대한가정학회지
• /
• 제40권12호
• /
• pp.119-129
• /
• 2002

This research aims at finding out situation on purchasing clothes for kids, size recognition and fitting to provide basic data in order to establish standard sizes for kids' clothes. A survey was conducted to 360 mothers who have children ranging from first to third grade in elementary school on clothes purchasing method, wearing situation, criteria in deciding size and fitting preference. In terms of data analysis, frequency, percentage, mean, $X^2$-test, ANOVA and Duncan-test were used via SPSS PC program. The result is as follows; 1. While the recognition on brand was high, the recognition on body size was low: as a result, it is believed that it would be effective to mark the weight along with the brand. 2. Many times, they would select one or two size bigger on all items and they would go for a regular or one that fits as far as filling is concerned showing that it is different from adult clothes. 3. As far as obese kids, they would choose based on the diameter, so the diameter item is right but they are too long in general. The length question should be given special attention when manufacturing clothes for obese kids.

• 한국재료학회지
• /
• 제19권6호
• /
• pp.330-336
• /
• 2009

The size of crystallites in mono-dispersed cubic silver bromide grains was measured by applying a powder X-ray diffraction method and Scherrer's equation to grains that were suspended in swollen gelatin layers. In order to evaluate the existence of defects, the measured crystallite size was compared to those measured by using a scanning electron microscope. In the case of the grains prepared by the controlled double jet method, the size of crystallites was equal to the edge length of the grains that had edge lengths smaller than 400 nm. This result proved the usefulness of the above-stated method for measuring the size of crystallites and also evaluating the presence of any crystal defect in each grain. In the case of the grains, which were precipitated in the presence of a sensitizing dye and potassium iodide, the size of crystallites was smaller than the edge's length, indicating the discontinuities in the grains introduced during the precipitation process.

• 한국기계가공학회지
• /
• 제18권11호
• /
• pp.63-68
• /
• 2019

The dimensional quality of flexible foams is often difficult to be evaluated through general machine vision inspection methods due to the free deformation of the outer shape. For the evaluation of the dimensions of flexible foams, methods of estimating the size of the product through the expansion rate of the product surface are evaluated. Specimens with various dimensions and surface gratings are prepared, and the degree of surface expansion is measured through machine vision. The correlation, between the measured surface grid size and the actual size of test specimens, is analyzed. We further analyze the correlation between the size of test specimens and the position of the surface grid. This study provides a basis for estimating the actual dimensions of specimens by measuring the surface expansion of flexible foams.

• 한국분말재료학회지
• /
• 제28권1호
• /
• pp.13-19
• /
• 2021

Bulk graphite is manufactured using graphite scrap as the filler and phenolic resin as the binder. Graphite scrap, which is the by-product of processing the final graphite product, is pulverized and sieved by particle size. The relationship between the density and porosity is analyzed by measuring the mechanical properties of bulk graphite. The filler materials are sieved into mean particle sizes of 10.62, 23.38, 54.09, 84.29, and 126.64 ㎛. The bulk graphite density using the filler powder with a particle size of 54.09 ㎛ is 1.38 g/㎤, which is the highest value in this study. The compressive strength tends to increase as the bulk graphite density increases. The highest compressive strength of 43.14 MPa is achieved with the 54.09 ㎛ powder. The highest flexural strength of 23.08 MPa is achieved using the 10.62 ㎛ powder, having the smallest average particle size. The compressive strength is affected by the density of bulk graphite, and the flexural strength is affected by the filler particle size of bulk graphite.

• 한국치위생학회지
• /
• 제22권4호
• /
• pp.259-272
• /
• 2022

Objectives: To identify the factors influencing the turnover intention of registered South Korean dental hygienists and analyze the effect sizes. Methods: Overall, 54 studies based on criteria of PICO from 1 January 2000 to 11 January 2022 were extracted. The factors related to turnover intention were applied to the ecological system theory and categorized. Subsequently, the effect size of the correlations was comprehensively meta-analyzed by dividing it into protective and risk factors depending on the negative or positive correlation direction. Results: For the overall effect size, the protective factor (ES_r=-0.458) was higher than the risk factor (ES_r=0.352). In the protective factors, organizational commitment and perceived organizational support belonging to the microsystem yielded the largest effect size. Furthermore, as for risk factors, burnout, job stress, work harassment, role conflict, and emotional labor belonging to the microsystem showed a moderate effect size. Conclusions: Factors belonging to the microsystem demonstrated a large effect size in both protection and risk factors for dental hygienists' turnover intention. Additionally, the factor showing the largest effect size was protective factor categorized into a microsystem.

• 한국운동역학회지
• /
• 제22권3호
• /
• pp.373-378
• /
• 2012

The purpose of this study was to develop an electric riding machine for cycle fitting to control riding posture easily, to measure frame size quantitatively, and to overcome disadvantages of the traditional systems. The electric riding machine consisted of actuator, load controller, and display & control unit. The actuator unit by BLDC(BrushLess Direct Current) motor drives the saddle height up and down, the crank forward and backward, the handlebar up and down, and the handlebar forward and backward. The load controller unit controls loads by Eddy current controller with electromagnet and aluminum circular plate. The display & control unit consisted of frame size controller and display panel which shows top tube length(485~663mm), head tube length(85~243mm), seat tube length(481~671mm), and seat tube angle($62.7{\sim}76.4^{\circ}$). The range of frame size control for developed electric riding machine did not have difference compared to traditional commercial systems, but quantitative and precise control with 0.1 mm length and $0.1^{\circ}$ angle was possible through digital measurement. Unlike traditional commercial systems, frame size control was possible during riding through motor driven method, thus fitting duration decreased. It is necessary for further improvement to have feedback from users. It is believed that developed electric riding machine can help to develop domestic fitting system.

• 교육녹색환경연구
• /
• 제14권2호
• /
• pp.37-44
• /
• 2015

2005년 "학교폭력 및 예방에 관한 법률"이 제정되면서 학교에 CCTV가 설치 운영되고 있다. 하지만 실제 학교현장에서는 CCTV 설치보다는 운영상의 모니터링 환경에 있어 문제점들이 발생하고 있다. 본 연구는 상기 문제점들 중 가장 큰 문제점인 CCTV 감시환경에 따른 적합한 모니터의 크기를 산정할 수 있는 모델을 제시함에 있다. 이를 위해 첫째, 선행연구를 통해 CCTV의 기본적 원리 및 적정 모니터링에 대한 기준을 분석한다. 둘째, 실태조사를 실시하여 실제 학교현장에서의 CCTV 모니터링 운영현황을 분석한다. 셋째, 국내 경비인력의 일반적인 시력을 기준으로 CCTV 사양 등에 따른 모니터의 출력크기를 산정할 수 있는 산정식과 적정한 모니터 크기를 산정할 수 있는 모델을 제시한다. 결론적으로 대부분의 학교현장에 설치된 CCTV를 고려하여 4개 분할화면의 모니터링을 적용하기 위해서는 최소 27인치의 모니터가 필요하다는 결과를 도출하였다.

• Journal of Periodontal and Implant Science
• /
• 제38권3호
• /
• pp.493-502
• /
• 2008

Purpose: The purpose of this study is to investigate on the regenerative capacity by using different size of graft materials around bony defect around implant. Material and Methods: Dental implant fixtures(Bio-TIS, Korea) were placed into the tibia of 8 rabbits. After placement of implant, artificial defects were created for each group, and the size of bone graft materials were used according to each designated group. 4 weeks after surgery, 8 rabbits were sacrificed. The histologic and histomorphometrical study were done for comparison of the regenerative capacity using $80-90{\mu}m$ and $200{\sim}1000{\mu}m$ size of grafting materials of OCS-$B^{(R)}$. Result: Matured bone formation was significantly increased more in Group E1($80-90{\mu}m$) than in Group E2($200{\sim}1000{\mu}m$). Group E1($80-90{\mu}m$) showed more significant augmentation in marginal length of graft material per unit area than Group E2($200{\sim}1000{\mu}m$). Group E1($80-90{\mu}m$) showed more interspace in graft material than Group E2($200{\sim}1000{\mu}m$). Control group showed no new bone formation around and inside of implanted fixture. Conclusion: Small grafting material size has great influence on bone regeneration.

• 한국생활과학회지
• /
• 제7권1호
• /
• pp.147-165
• /
• 1998

The object of this study was to help designing of well-fit and comfortable brassieres for the elementary school girls through the survey on actual condition of wearing brassieres. The subjects of investigation for this study was the elementary school girls in the province of Jeonbuk and Taejeon city. The conclusion of this study was as follows; The 40.2% of the total subjects were wearing brassieres like the 63.3% of the fourth, the 85.4% of the fifth, and the 89.7% of the sixth grade students. The main reason of non wearing brassieres was for the underdeveloped breast, and also that of wearing brassieres was for the good shape of the breast. The main types of brassieres were ranked "Tank Top type", "Mold type", and "Adolescent girl-Bra". They had started to wear brassieres by the recommendation of adults who were their mother or teachers, and usually wearing brassieres all day. They usually purchased brassieres "with mother together" or "only by their mother". The standard of choosing brassieres was also ranked by FASHION, CONVENIENCE, SIZE, TOUCH, and SWEAT ABSORPTION. The total score of satisfaction for wearing brassieres was showed "Average score" and the score higher in Jeonju and Taejeon than in Kunsan. The higher grade and fatter was showed decreasing the score of satisfaction. The higher grade became, the more various for the size and preferable a pure cotton fabric for brassieres. The favorite types of brassieres were "Sport Bra" and "Volume-up Bra". They usually purchased a little larger size than their original size of that.

• 한국수소및신에너지학회논문집
• /
• 제28권1호
• /
• pp.70-76
• /
• 2017

To synthesize copper nanoparticle a thermal decomposition was adopted. And to solve the problem of surface oxidation of the synthesized copper powder an electroless Ag plating method was used. The size and shape of synthesized Cu nanoparticle were affected by the size of copper oxalate used as a precursor, reaction solvent, reaction temperature and amount of reducing agent. Especially reaction solvent is dominant factor to control shape of Cu nano-particle which can have the shapes of sphere, polygon and rod. In case of glycerol, it produced spherical shape of about 500 nm in size. Poly ethylene produced uniform polygonal shape in about 700 nm and ethylene glycol produced both of polygon and rod having size range between 500 and 1500 nm. The silver coated copper powder showed a high electrical conductivity.