• Journal of Broadcast Engineering
• /
• v.12 no.2
• /
• pp.102-111
• /
• 2007

Currently, the efficient adaptive video streaming services and coding techniques are required to ensure quality of service (QoS) in diverse multimedia environments. To maintain optimal video quality in these environments, it is required to support scalable video coding (SVC) technique and proper QoS metric methods. In this paper, we propose a new quality metric that takes in to the temporal, the SNR, the spatial scalability on SVC. Experimental results shows that proposed method has a higher correlation with the subjective quality. We expect that the proposed metric plays an important role in deciding the coding parameter to optimize the quality of the SVC based video.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.160-165
• /
• 2005

Schools have significant and serious indoor environmental health problem, of which indoor air quality (IAQ) in school building may affect the health of the students and indirectly affect learning performance. Schools are of special concern when regarding indoor exposure to air pollutants, because students are particularly sensitive to pollutants and spend a significant amount of time in that environment. Therefore researches for improvement of indoor air quality have been developed such as installation of air cleaning device, ventilation system, titanium dioxide(TiO2) coating and so on. However, it is difficult to evaluate the magnitude of improvement of indoor air quality in field study because indoor air quality can be affected by source generation, outdoor air level, ventilation, decay by reaction, temperature, humidity, mixing condition and so on. In this study, evaluation of reduction of formaldehyde emission rate in school indoor environments by far-Infrared ray coating material was carried out using mass balance model in indoor environment. we proposed the evaluation method of magnitude of improvement in indoor air quality, considering outdoor level and ventilation. Since simple indoor concentration measurements could not properly evaluate the indoor air quality, outdoor level and ventilation should be considered when evaluate the indoor air quality.

• Korean Journal of Community Nutrition
• /
• v.17 no.1
• /
• pp.69-80
• /
• 2012

This study was conducted to examine the nutritional status, quality of diet and quality of life in postmenopausal women with mild climacteric symptoms based on their food group intake patterns. The data for nutritional status were obtained using 3-day records. Quality of diet was assessed by INQ, NAR, MAR, DDS, DVS, DQI-I. Climacteric symptoms were analyzed by the questionnaire of Kupperman's index and MENoL. The subjects were classified into the five groups, GMVDF, GMVdF, GMVDf, GMVdf, GmVDF according to their food group intake patterns. Analysis of nutrient intakes showed that the GMVDF group took significantly higher levels of kcal, carbohydrate, protein, fat, vitamin A, thiamin, riboflavin, folate, vitamin C, vitamin E, calcium, phosphorous, sodium, iron, zinc and fiber than GMVdf group did (p < 0.05). INQ of Ca and Fe appeared to be higher in GMVDF than in GMVdf groups (p < 0.05). Analysis of NARs showed that missing milk groups took lower riboflavin, Ca and P than other groups did as the same result with MAR (p < 0.05). Analysis of DDS and DQI showed that GMVdf group had the lowest quality of diet (p < 0.05); however, no difference was found on DVS. The GMVdf group showed the worst climacteric symptoms compared with those of the other groups (p < 0.05). However, we couldn't observe any differences in menopause-specific quality of life among the groups. In conclusion, it would be beneficial to meet all five food groups to increase the quality of diet and to reduce the climacteric symptoms in postmenopausal women.

• Korean Journal of Radiology
• /
• v.21 no.8
• /
• pp.967-977
• /
• 2020

Objective: To evaluate the effects of tube voltage on image quality in coronary CT angiography (CCTA), the estimated radiation dose, and DNA double-strand breaks (DSBs) in peripheral blood lymphocytes to optimize the use of CCTA in the era of low radiation doses. Materials and Methods: This study included 240 patients who were divided into 2 groups according to the DNA DSB analysis methods, i.e., immunofluorescence microscopy and flow cytometry. Each group was subdivided into 4 subgroups: those receiving CCTA only with different tube voltages of 120, 100, 80, or 70 kVp. Objective and subjective image quality was evaluated by analysis of variance. Radiation dosages were also recorded and compared. Results: There was no significant difference in demographic characteristics between the 2 groups and 4 subgroups in each group (all p > 0.05). As tube voltage decreased, both image quality and radiation dose decreased gradually and significantly. After CCTA, γ-H2AX foci and mean fluorescence intensity in the 120-, 100-, 80-, and 70-kVp groups increased by 0.14, 0.09, 0.07, and 0.06 foci per cell and 21.26, 9.13, 8.10, and 7.13 (all p < 0.05), respectively. The increase in the DNA DSB level in the 120-kVp group was higher than those in the other 3 groups (all p < 0.05), while there was no significant difference in the DSBs levels among these latter groups (all p > 0.05). Conclusion: The 100-kVp tube voltage may be optimal for CCTA when weighing DNA DSBs against the estimated radiation dose and image quality, with further reductions in tube voltage being unnecessary for CCTA.

• Journal of Animal Science and Technology
• /
• v.66 no.2
• /
• pp.251-265
• /
• 2024

Meat derived from skeletal muscles of animals is a highly nutritious type of food, and different meat types differ in nutritional, sensory, and quality properties. This study was conducted to compare the results of previous studies on the muscle fiber characteristics of major porcine skeletal muscles to the end of providing basic data for understanding differences in physicochemical and nutritional properties between different porcine muscle types (or meat cuts). Specifically, the muscle fiber characteristics between 19 major porcine skeletal muscles were compared. The muscle fibers that constitute porcine skeletal muscle can be classified into several types based on their contractile and metabolic characteristics. In addition, the muscle fiber characteristics, including size, composition, and density, of each muscle type were investigated and a technology based on these muscle fiber characteristics for improving meat quality or preventing quality deterioration was briefly discussed. This comparative review revealed that differences in muscle fiber characteristics are primarily responsible for the differences in quality between pork cuts (muscle types) and also suggested that data on muscle fiber characteristics can be used to develop optimal meat storage and packaging technologies for each meat cut (or muscle type).

• Journal of Korean Society for Quality Management
• /
• v.40 no.4
• /
• pp.589-598
• /
• 2012

Purpose: Determination of the importance values of quality attributes is very important to integrate the Kano model with QFD. A new method to determine the importance values of quality attributes is proposed. Methods: ASC(Average Satisfaction Coefficient) is proposed in order to determine the importance values of quality attributes. To evaluate the effectiveness of ASC, a case study of modern TV sets is conducted, and the performance of ASC is compared with direct importance evaluation and AHP pairwise comparisons. Results: The result of ASC application is similar with those of direct importance evaluation and AHP pairwise comparison. Conclusion: ASC is an effective instrument to determine the importance values of quality attributes. It doesn't need a cumbersome process like AHP pairwise comparison, and can be calculated using the data for the conventional Kano model.

• International Journal of Automotive Technology
• /
• v.4 no.4
• /
• pp.193-201
• /
• 2003

The problem of brake judder is typically caused by defects of quality manufacturing. DFSS (Design for six sigma) is a design process for quality improvement. DFSS will result in more improved but less expensive quality products. This paper presents an implementation of DFSS for quality improvement of the brake judder of heavy-duty trucks. Carrying out 5 steps of DFSS, the major reasons for defects of quality are found. The numerical approximation of the brake system is derived by means of the response surface method. Its quality for brake judder is improved by using the sigma based robust design methodology. Results are compared between the conventional deterministic optimal design and the proposed sigma based robust design. The proposed one shows that manufacturing cost may increase as the quality level increase. The proposed one, however, is more economical in aspect of the overall cost since the probability of failure dramatically goes down.

• Journal of Korean Society for Quality Management
• /
• v.33 no.4
• /
• pp.1-11
• /
• 2005

This paper investigates the effect of introducing MBNQA Model, a representative execution system of TQM with strong management innovation capability, and its Korean version, Korean Quality Award Model, to the Korean companies and analyzes the effect to find out whether the application has improved companies' management quality. The empirical result of this study not only provides the company planning to adopt those management innovation models to enhance their management quality with practical guidelines but also suggest a direction to the first class company.

• Journal of Korean Society for Quality Management
• /
• v.39 no.3
• /
• pp.444-460
• /
• 2011

We study on the Influence of Business Performance by the Defense Quality Management System(DQMS). In this paper, we establish the 7 hypothesis which is as following that Motivation of DQMS certificate and CEO leadership of DQMS certificate will affect the DQMS, DQMS will affect on Quality performance and Customer performance, Quality performance will affect on Customer performance, each of Quality performance and Customer performance will affect Business Performance. By empirical study, we prove all hypothesis is accepted. We hope this result to improve performance and DQMS of corporate which try to take DQMS certificate.

• IE interfaces
• /
• v.20 no.3
• /
• pp.339-352
• /
• 2007

Beyond SERVQUAL-based service quality research, we develop a measurement model of public service quality that would provide researchers and practitioners in the public sector with a foundation for systematic investigation and implementation. Firstly, we explore the attributes of public service quality that lead to customer satisfaction by using the critical incident technique (CIT). We identified four dimensions of public service qualities. We also found that the critical attributes of service quality differ according to the types of customers. Secondly, to achieve a high degree of empirical confidence, we conduct statistical tests and analyses on the classification scheme and on the attributes of service quality that we derived from the CIT analysis. Through these analyses, we could remove the redundancy among attributes and group the attributes into new constructs, which are mutually exclusive and exhaustive; we built a more sophisticated measurement model of service quality.