• 한국전자파학회논문지
• /
• 제17권12호
• /
• pp.1212-1223
• /
• 2006

마이크로웨이브 대역은 무선 서비스의 수요가 많은 대역이지만 주로 장거리 고정 통신용으로 이용되어 전파 모델에 대한 연구가 VHF/UHF 대역보다 적게 이루어졌으나, 최근 마이크로웨이브 대역을 이용한 이동 통신 서비스가 증가됨에 따라 보다 정확성 있는 전파 예측 모델의 개발이 요구되어 왔다. 이동 전파 환경에서 신뢰성있는 전파 예측 모델을 개발하기 위해서는 다양한 전파 환경에서 신호의 반사, 회절 및 산란에 따른 전파 특성에 대한 측정 및 분석이 필요하다. 제시된 8 GHz 대역용 전파 예측 모델은 가시거리 영역과 비가시거리 영역에 맞는 모델을 구분하여 개발된다. 가시거리 영역용 예측 모델은 직접파, 지면 반사파 및 도로 양쪽 건물 반사파에 의한 해석적 결과에 측정된 경로 손실 지수를 적용하여 신호 세기를 예측하고, 비가시거리 영역용 예측 모델은 회절 후 신호 변화 현상에 대한 분석 결과를 이용하여 수신 전력을 예측한다.

• Ocean and Polar Research
• /
• 제30권2호
• /
• pp.181-191
• /
• 2008

This study aims at assessment of spatio-temporal distribution of demersal fish aggregations near the west coast of Jeju Island using hydroacoustic survey. A 200 kHz split beam transducer attached to a small towed body was used for all acoustic investigations. The received acoustic data were in situ acoustic target strength (TS, dB) for all pings and nautical area scattering coefficient(NASC, $m^2/mile^2$) for 0.1 mile along 12 acoustic transects. Demersal fish aggregations are distributed around the coastal slope having 20 to 30 m depth throughout all seasons. The concentration is higher during the summer season. With regard spatial distribution, higher demersal fish aggregations have been detected near the West coast of Shinchang and especially near Chagwi-do. Pelagic fish aggregations were higher to the south of Chagwi-do during the spring season. Additionally, standing stock of demersal fish aggregations from the NASC data, TS function, and length-weight function of dominant species was estimated as follows: 3.2 ton (CV 21.8%) in December 2006, 17.9 ton (CV 21.6%) in April 2007, 30.8 ton (CV 17.8%) in June 2007, and 22.5 ton (CV 24.2%) in October 2007. The application of hydroacoustic methods offers a new approach to understanding spatiotemporal structure and estimate the biomass of demersal fish aggregations in the coastal area. And the results can be made up limitations of qualitative analysis through net and diving for fisheries resources survey in coastal area.

• 수산해양기술연구
• /
• 제52권3호
• /
• pp.276-280
• /
• 2016

This study investigated luring distributions by water layer of common squid which were targeted by angling fishing vessels equipped with LED and metal-halide lamps using a scientific echosounder with a 120 kHz frequency in order to develop energy-effective underwater fish aggregation devices. In the analysis, angles of a transducer were changed from $0^{\circ}$ to $45^{\circ}$ and were rotated every $10^{\circ}$ horizontally. It was shown that common squid were densely distributed from the surface to 40 m and they were also distributed in directions of $10^{\circ}{\sim}+30^{\circ}$, $-30^{\circ}{\sim}-60^{\circ}$, and $-120^{\circ}{\sim}-130^{\circ}$with the head of vessel as the center. Comparative results of angles of transducer on acoustical densities of common squid distributing in 21~40 m water depth showed an average $101.8m^2/nm^2$ in vertical direction of $0^{\circ}$, $12.3m^2/nm^2$ in angle of $30^{\circ}$, and $42.4m^2/nm^2$ in angle of $45^{\circ}$, respectively. It implied that more considerations on acoustic scattering strength by incidence angle direction of the transducer and swimming oriental angle direction of common squid would be required.

• 수산해양기술연구
• /
• 제43권4호
• /
• pp.355-361
• /
• 2007

A giant jellyfish (Nemopilema nomurai), which is presumed developing in the East China Sea, is recently one of major issues in the Northeast Asia region due to its fatal damage to the fishery. The biomass estimates have generally been conducted by trawl sampling and sighting survey methods. The biological research is also needed to clarify such environmental origin or diurnal migration patterns. While trawl sampling or sighting survey methods are effective to investigate its density estimates in its distributed community of near bottom or surface, they have a problem in investigation on the vertical distribution of jellyfishes. In this case, an echo sounding detection would have an advantage to survey it more extensively and effectively. This trial was conducted to observe the vertical distribution of giant jellyfish, where thermocline strongly formed, during mooring at each station of the East China Sea and southern coastal area using acoustical and optical methods. By the results, they were observed to exit and move at the water column under the thermocline using the optical camera and echo sounder system, and the information was analyzed to find out the acoustical sound scattering characteristics relatives to 120kHz frequency. These results can be utilized effectively to estimate the vertical distribution and biomass of Giant jellyfish with comparing results from trawl sampling and sighting survey methods, hereafter.

• 천문학회지
• /
• 제48권2호
• /
• pp.105-112
• /
• 2015

The symbiotic star V1016 Cygni, a detached binary system consisting of a hot white dwarf and a mass-losing Mira variable, shows very broad emission features at around 6825 Å and 7082 Å, which are Raman scattered O vi λλ 1032, 1038 by atomic hydrogen. In the high resolution spectrum of V1016 Cyg obtained with the Bohyunsan Optical Echelle Spectrograph these broad features exhibit double peak profiles with the red peak stronger than the blue counterpart. However, their profiles differ in such a way that the blue peak of the 7082 feature is relatively weaker than the 6825 counterpart when the two Raman features are normalized to exhibit an equal red peak strength in the Doppler factor space. Assuming that an accretion flow around the white dwarf is responsible for the double peak profiles, we attribute this disparity in the profiles to the local variation of the flux ratio of O vi λλ 1032, 1038 in the accretion flow. A Monte Carlo technique is adopted to provide emissivity maps showing the local emissivity of O vi λ1032 and O vi λ1038 in the vicinity of the white dwarf. We also present a map indicating the differing flux ratios of O vi λλ 1032 and 1038. Our result shows that the flux ratio reaches its maximum of 2 in the emission region responsible for the central trough of the Raman feature and that the flux ratio in the inner red emission region is almost 1. The blue emission region and the outer red emission region exhibit an intermediate ratio around 1.5. We conclude that the disparity in the profiles of the two Raman O vi features strongly implies accretion flow around the white dwarf, which is azimuthally asymmetric.

• 한국음향학회지
• /
• 제13권2호
• /
• pp.30-37
• /
• 1994

최근 표적의 고속화와 저표적강도화 추세에 따라 표적 탐지의 정확성이 요구되고 있다. 본 연구는 이에 부합하여 표적 운동 해석, 표적 분류, 소나 성능 예측 모델의 개발에 필수적인 표적 산란 잔향 신호의 주파수 및 시간별 특성의 파악과 그러한 특성을 포함한 표적 신호 시뮬레이션에 목적을 두고 있다. 표적 신호 시뮬레이션에는 음향 변환자 배열의 음원 준위와 빔패턴으로 구성되는 음원모델, 전달 손실 예측부인 환경모델, 복합 표적에 의한 신호의 신장 및 표적 강도와 음원과 표적의 상대운동을 표현하는 도플러 현상이 고려된 표적모델, 수신기의 감도 및 빔패턴과 각 채널의 시간이 고려된 수신 모델 등 주요한 4부분의 모델이 필요하다. 개발된 MOST(MOving Spread Target) 신호합성기는 환경모델을 제외한 3가지 모델로 구성 되어 있으며, 음원과 표적의 운동에 의한 신호 특성 시뮬레이션 등의 기능을 갖추고 있어, 소나 운용 체계 개발의 한 단계인 HILS(Hardware In the Loop Simulation)와 표적 상태 추정을 위한 신호 특성 분석 및 앞에서 언급한 각종 모델에서 신호 발생 장치로 이용될 수 있다.

• Steel and Composite Structures
• /
• 제33권3호
• /
• pp.445-461
• /
• 2019

The ultrasonic guided wave-based technique has become one of the most promising methods in non-destructive evaluation and structural health monitoring, because of its advantages of large area inspection, evaluating inaccessible areas on the structure and high sensitivity to small damage. To further advance the development of damage detection technologies using ultrasonic guided waves for the inspection of welded components in structures, the transmission characteristics of the ultrasonic guided waves propagating through welded joints with various types of defects or damage in steel plates are studied and presented in this paper. A three-dimensional (3D) finite element (FE) model considering the different material properties of the mild steel, high strength steel and austenitic stainless steel plates and their corresponding welded joints as well as the interaction condition of the steel plate and welded joint, is developed. The FE model is validated against analytical solutions and experimental results reported in the literature and is demonstrated to be capable of providing a reliable prediction on the features of ultrasonic guided wave propagating through steel plates with welded joints and interacting with defects. Mode conversion and scattering analysis of guided waves transmitted through the different types of weld defects in steel plates are performed by using the validated FE model. Parametric studies are undertaken to elucidate the effects of several basic parameters for various types of weld defects on the transmission performance of guided waves. The findings of this research can provide a better understanding of the transmission behaviour of ultrasonic guided waves propagating through welded joints with defects. The method could be used for improving the performance of guided wave damage detection methods.

• 한국분말재료학회지
• /
• 제26권4호
• /
• pp.290-298
• /
• 2019

$TiO_2$-particles containing Co grains are fabricated via thermal hydrogenation and selective oxidation of TiCo alloy. For comparison, $TiO_2$-Co composite powders are prepared by two kinds of methods which were the mechanical carbonization and oxidation process, and the conventional mixing process. The microstructural characteristics of the prepared composites are analyzed by X-ray diffraction, field-emission scattering electron microscopy, and transmission electron microscopy. In addition, the composite powders are sintered at $800^{\circ}C$ by spark plasma sintering. The flexural strength and fracture toughness of the sintered samples prepared by thermal hydrogenation and mechanical carbonization are found to be higher than those of the samples prepared by the conventional mixing process. Moreover, the microstructures of sintered samples prepared by thermal hydrogenation and mechanical carbonization processes are found to be similar. The difference in the mechanical properties of sintered samples prepared by thermal hydrogenation and mechanical carbonization processes is attributed to the different sizes of metallic Co particles in the samples.

• 대한건축학회논문집:구조계
• /
• 제35권12호
• /
• pp.149-156
• /
• 2019

Recently, skyscraper building and apartment fires, which were rapidly spread out from a low floor to a rooftop, have become a frequent occurrence in mass media. This fire problems have a fatal disadvantage that the exterior wall finish of the building emits toxic gas in case of fire by using dry bit method or organic insulating material. Therefore, in order to remedy these problems, many exterior wall finishing construction methods have been proposed, but the current trend is to use existing construction methods due to problems such as economy, weight, and durability. On the other hand, in countries such as Germany and Japan, ceramic sidings are used as exterior finishing material for buildings, which is environmentally friendly, excellent natural beauty, long life, easy maintenance and high-quality exterior materials. However, those ceramic sidings have still the problems such as manufacturing cost and weight problem because of boosting the sintering temperature up to 1,350℃ or more. Also, conventional CRC, MgO, FRP sidings which are composed of pulp, glass fiber and organic materials, have been reports of deformation due to ultraviolet rays, discoloration, corrosion and scattering, surface rupture, lifting and peeling. Therefore, in this study as an alternative to solve this problem, halosite nano kaolin produced in Sancheong in Korea and frit flux were used to satisfy the required properties as ceramic siding using low temperature sintering (below 1,000℃) and lightweight materials such as pearlite. This study aims to design the optimal formulation and process of materials and to study the characteristics of nano-coated ceramic siding material development and to present relevant basic data. The findings show that ceramic siding for nanocoated building materials is excellent as a natural ceramic siding building material. The fire resistance of natural minerals and nano particle refining technology satisfy the bending strength of 80kgf / cm2, the volume ratio of 2.0 and the absorption rate of less than 10.0%.

• 자원환경지질
• /
• 제53권4호
• /
• pp.347-362
• /
• 2020

수환경 내 철 (수산)산화물은 주로 광산 활동에 의해 생성되며 주변 환경을 교란시키는 대표적인 교질물이다. 철 (수산)산화물들 중 지표에 많이 분포하고 있는 적철석은 수환경 내 다양한 환경인자들로 인해 거동 특성이 변한다. 본 연구는 배경용액의 이온 조성과 세기, pH, 자연 유기물 등의 환경적 인자가 교질상 적철석의 거동에 미치는 영향을 살펴보고자 수행되었다. 특히, 적철석 교질물 입자들의 거동특성을 보다 더 명확하게 해석하고자 동적광산란분석기(dynamic light scatterer, DLS)와 단일입자 유도결합플라즈마질량분석기(single particle ICP-MS, spICP-MS)를 비교하여 분석을 수행하였다. 배경용액의 이온 조성과 세기가 변함에 따라 적철석 입자의 표면 확산이중층의 두께가 변화될 뿐만 아니라, 입자에 미치는 정전기적 힘과 van der Walls의 합력이 변하면서 입자의 응집/분산 특성이 달라지는 것으로 나타났다. 또한 수환경의 pH가 적철석 입자의 영전하점(point of zero charge, PZC)에서 멀어질수록 정전기적 반발력이 커져 입자들이 분산되는 것을 확인하였다. 수환경 내 자연 유기물이 적철석의 표면을 코팅함에 따라서 자연 유기물 표면에 존재하는 카르복실기와 페놀기 등과 같은 작용기들로 인하여 적철석 입자의 정전기적 안정화와 구조적 안정화가 증가하는 것으로 조사되었다. 이러한 안정화 효과는 자연 유기물의 농도가 작을수록 증가하지만, 상대적으로 이온포텐셜이 큰 2가 양이온이 1가 양이온보다 자연 유기물로 코팅된 적철석 입자들 사이에서 더 큰 가교역할을 하기 때문에 자연 유기물로 코팅된 적철석 입자들의 안정화(분산)를 방해하는 것으로 확인되었다. 결론적으로, 수환경 내 교질상 적철석의 거동 특성은 이온의 조성과 세기, pH, 그리고 자연 유기물 등과 같은 환경적 인자들에 많은 영향을 받는 것을 정량적으로 확인할 수 있었는데, 그 중 자연 유기물은 수환경에서 교질물의 거동에 매우 지배적이고 주요한 제어인자임을 알 수 있었다. 한편, 적철석 입자의 거동 특성을 정량화할 수 있는 두 분석기법을 비교한 결과, DLS 분석기법은 신속성 및 편의성에서 강점을 지니는 반면 spICP-MS의 분석기법은 입자의 모양 및 응집 형태 등을 고려할 수 있는 장점이 있기 때문에 두 분석기법을 조합하여 활용하면 수환경 내 교질물의 거동 특성을 연구하는데 보다 더 효과적일 것으로 판단된다.