• 융합신호처리학회논문지
• /
• 제12권4호
• /
• pp.315-321
• /
• 2011

선박이나 함정에서 일반적으로 사용되는 SONAR 신호용 CRT 모니터 디스플레이 시스템은 벡터 주사 방식을 사용한다. 그래서 시스템의 처리회로가 복잡하고, 부품 생산이 폐쇄되어 부품 수급이 어렵고 가격이 고가이다. FPGA 기반 임베디드 프로세서 시스템은 회로를 단순화함과 더불어 코어설계를 쉽게 재구성함으로써 각종 응용 적용에 유연하고, 저가격대로 고속 성능을 제공한다. 본 논문은 기존 CRT시스템의 문제점을 극복하기 위해서 FPGA 임베디드 프로세서 시스템을 사용하여 SONAR 신호 LCD 디스플레이 시스템을 구현하였다. 제안한 접근법은 기존 시스템에 비해 X-Y 편향과 CRT 제어 블록을 FPGA 임베디드 프로세서 시스템으로 대체함으로써 시스템 구성의 단순성과 유연성을 확보할 수 있고, 또한 저가격화를 가능하게 한다. 구현된 시스템은 SONAR 신호를 실시간으로 획득하고 LCD에 디스플레이하는 것이 가능하다.

• Progress in Superconductivity
• /
• 제8권1호
• /
• pp.93-97
• /
• 2006

YBCO films were deposited on a moving substrate by a spray pyrolysis method using nitrate aqueous solution as precursors. Deposition was made on $LaAlO_3$(100) single crystal substrate by spraying precursor droplets generated by a concentric nozzle. The cation ratio of precursor solution was Y:Ba:Cu=1:2.65:4.5. The distance between nozzle and substrate was 15 cm. Substrate was transported with a speed ranging from 0.23 cm/min to 0.5 cm/min. Films were deposited at the pressure ranging from 10 Torr to 20 Torr and the deposition temperature was ranged from $740^{\circ}C\;to\;790^{\circ}C$. Oxygen partial pressure was controlled between 1 Tow and S Torr. Superconducting YBCO films were obtained from $740^{\circ}C\;to\;790^{\circ}C$ with an oxygen partial pressure of 3 Torr. Scanning electron microscope(SEM) and X-ray diffraction(XRD) observation revealed that films are smooth and highly texture with(001) plans parallel to substrate plane. Highest Jc was 0.72 $MA/cm^2$ at 77K and self-field for the film with a thickness of 0.15 m prepared at a substrate temperature of $740^{\circ}C$ and $PO_2$=3 Torr.

• 비파괴검사학회지
• /
• 제37권1호
• /
• pp.21-28
• /
• 2017

배열 와전류 기술은 2차원적으로 나란히 정열된 다수의 와전류 코일로 구성된 탐촉자 면적에 대하여 기계적인 이동없이 전기적으로 주사할 수 있다. 단일 코일을 사용하는 와전류 기술과 비교하여 탐촉자가 한 번의 이동으로 넓은 영역을 검사할 뿐만 아니라 데이터 해석이 용이하여 검사 속도와 신뢰성을 향상시키는 장점이 있다. 이번 연구에서는 $2{\times}16$ 코일 배열의 배열 와전류 탐촉자와 순차적으로 송수신 코일을 선택하고 송수신 모드로 동작시키는 다중화기기를 개발하였다. 이 탐촉자를 이용하여 다양한 종류의 시편을 제작하여 표면검사를 수행하고, 와전류 신호 및 C-scan을 이미지 분석을 통해 송수신 모드 배열 와전류 기술의 특성에 대해 연구하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.390-390
• /
• 2012

Information technology industries has grown rapidly and demanded alternative memories for the next generation. The most popular random access memory, dynamic random-access memory (DRAM), has many advantages as a memory, but it could not meet the demands from the current of developed industries. One of highlighted alternative memories is magnetic random-access memory (MRAM). It has many advantages like low power consumption, huge storage, high operating speed, and non-volatile properties. MRAM consists of magnetic-tunnel-junction (MTJ) stack which is a key part of it and has various magnetic thin films like CoFeB, FePt, IrMn, and so on. Each magnetic thin film is difficult to be etched without any damages and react with chemical species in plasma. For improving the etching process, a high density plasma etching process was employed. Moreover, the previous etching gases were highly corrosive and dangerous. Therefore, the safety etching gases are needed to be developed. In this research, the etch characteristics of CoFeB magnetic thin films were studied by using an inductively coupled plasma reactive ion etching in $CH_4/O_2/Ar$ gas mixes. TiN thin films were used as a hardmask on CoFeB thin films. The concentrations of $O_2$ in $CH_4/O_2/Ar$ gas mix were varied, and then, the rf coil power, gas pressure, and dc-bias voltage. The etch rates and the selectivity were obtained by a surface profiler and the etch profiles were observed by a field emission scanning electron microscopy. X-ray photoelectron spectroscopy was employed to reveal the etch mechanism.

• 한국자동차공학회논문집
• /
• 제19권3호
• /
• pp.65-72
• /
• 2011

In this study, the numbers, sizes of particles from a single cylinder direct injection spark-ignition (DISI) engine fuelled with gasoline and LPG are examined over a wide range of engine operating conditions. Tests are conducted with various engine loads (2~10bar of IMEP) and fuel injection pressures (60, 90, and 120 bar) at the engine speed of 1,500 rpm. Particles are sampled directly from the exhaust pipe using rotating disk thermodiluter. The size distributions are measured using a scanning mobility particle sizer (SMPS) and the particle number concentrations are measured using a condensation particle counter (CPC). The results show that maximum brake torque (MBT) timing for LPG fuel is less sensitive to engine load and its combustion stability is also better than that for gasoline fuel. The total particle number concentration for LPG was lower by a factor of 100 compared to the results of gasoline emission due to the good vaporization characteristic of LPG. Test result presents that LPG for direct injection spark ignition engine help the particle emission level to reduce.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.182-183
• /
• 2014

Hemispherical dimples with diameter, ø=$60{\mu}m$ and depth, d= $30{\mu}m$ were created on the metal and ceramics surfaces using INYA 10 watt Laser of 1064 nm wavelength. This study reports the influence of dimple pitch on friction and wear behavior rather than dimple size, depth and density. LST was performed on the specimens with dimple pitch and density in the range of 80 to-$200{\mu}m$ and 44 to 7 %, respectively. Surface topography was analyzed by using roughness measurement, scanning electron microscopy (SEM), and optical microscopy. Friction and wear characteristics were analyzed on textured surfaces at lubricating environment to observe the effect of surface texturing on reduction of friction and wear. Reduction on coefficient of friction was achieved by more than 70% due to the dual behavior of dimples as wear (debris) traps and lubricant reservoirs. Wear reduced significantly for the textured surface as compared to the polished surface. Moreover, the friction coefficient of the textured specimens reduced with increasing load and speed which may be attributed to the transition of lubrication regime.

• The Journal of Advanced Prosthodontics
• /
• 제6권3호
• /
• pp.157-164
• /
• 2014

PURPOSE. This study focused on in vitro cell differentiation and surface characteristics in a magnesium coated titanium surface implanted on using a plasma ion source. MATERIALS AND METHODS. 40 commercially made pure titanium discs were prepared to produce Ti oxide machined surface (M) and Mg-incorporated Ti oxide machined surface (MM). Surface properties were analyzed using a scanning electron microscopy (SEM). On each surface, alkaline phosphatase (ALP) activity, alizarin red S staining for mineralization of MC3T3-E1 cells, and quantitative analysis of osteoblastic gene expression, were evaluated. Actin ring formation assay and gene expression analysis of TRAP and GAPDH performing RT-PCR were performed to characterize osteoclast differentiation on mouse bone marrow-derived macrophages (BMMs). RESULTS. MM showed similar surface morphology and surface roughness with M, but was slightly smoother after ion implantation at the micron scale. M was more hydrophobic than MM. No significant difference between surfaces on ALP activity at 7 and 14 days were observed. Real-time PCR analyses showed similar levels of mRNA expression of the osteoblast phenotype genes; osteopontin (OPN), osteocalcin (OCN), bone sialoprotein (BSP), and collagen 1 (Col 1) in cell grown on MM at 7, 14 and 21 days. Alizarin red S staining at 21 days showed no significant difference. BMMs differentiation increased in M and MM. Actin ring formation assay and gene expression analysis of TRAP showed osteoclast differentiation to be more active on MM. CONCLUSION. Both M and MM have a good effect on osteoblastic cell differentiation, but MM may speed the bone remodeling process by activating on osteoclast differentiation.

• 한국가정과학회지
• /
• 제5권1호
• /
• pp.62-70
• /
• 2002

The objective of this study was to evaluate the effects of processing parameters of co-rotating twin screw extruder and dry methods on the level of resistant starch (RS) and the properties of extrudate prepared from normal maize starch. The processing parameters were used 90, 110, 130$^{\circ}C$ in temperature, 25.0~30.0% in moisture content, 150, 200, 250 rpm in screw speed and hot and cool air drying and drying after refrigerating in drying methods. The barrel temperature and drying methods had affected the level of resistant starch of extrudate. RS levels of extrudates were ranged from 2.4 to 15.5% by AOAC method. The extrudates, extruded at 110$^{\circ}C$ and then stored at 4$^{\circ}C$, showed the highest level of RS level (15.5%). Water absorption index increased with increasing moisture content and peak temperatures and viscosities of extudates decreased compare to that of raw starch from 94$^{\circ}C$ to 50~65$^{\circ}C$ and from 220 to 46~98 RVU, respectively. Extudates treated in 90$^{\circ}C$ and 110$^{\circ}C$ showed strong peak at $2{\theta}=6.7{\sim}17.0^{\circ}$ by X-ray diffractometry and had ~150$^{\circ}C$ endotherm like as that of RS3 starch by differential scanning calorimetry. In case of 130$^{\circ}C$, extrudates showed strong peak at $2{\theta}=20.0^{\circ}$ and had 106$^{\circ}C$ endotherm.

• Journal of the Optical Society of Korea
• /
• 제16권2호
• /
• pp.174-180
• /
• 2012

In this study, the feasibility of spectral domain optical Doppler tomography for measuring blood flow characteristics in a micro-tube was demonstrated through several experiments. The use of an SD-ODT system in blood flow measurement can provide high resolution images (5 microns resolution). We prepared three capillary tubes to reveal the effect of different concentrations of hematocrit ratio (HR). One tube serves as the control. The two other tubes contained different concentrations of HR (5%, 25%). Three different capillary tube inlet flow velocities were tested in the present study. The Reynolds number (Re) which is based on the capillary tube inner diameter ranges from Re=6 to 48. We calculated a Doppler shift of the power spectrum of the temporal interference fringes with Kasai autocorrelation function to achieve the velocity profile of the flow. As a result, SD-ODT systems could not detect the cell depletion layer in the present study due to the limitation of spatial resolution. Nevertheless, these systems were proven to be capable of observing the RBCs of blood.

• 폴리머
• /
• 제26권6호
• /
• pp.759-766
• /
• 2002

스티렌과 물이 주된 원료로 구성된 혼합물을 high internal Phase emulsion (HIP보) 중합을 통하여 균일한 구형의 등방성 구조로 이루어진 저밀도의 열린 구조 미세기공 발포체를 제조하였고, 물, 가교결합제인 divinylbenzene, 사슬이동제인 dodecane의 함량 변화 등의 중합조건이 미세기공발포체의 기공 크기 및 물성에 미치는 영향을 조사하였다. 제조한 HIPE 발포체의 미세구조 모폴로지를 확인하기 위하여 SEM 사진으로 관찰하였고 기계적 물성을 평가하기 위하여 압축시험으로 압축 탄성률을 측정하였다. 연구 결과 오일 상에 수용액 상을 주입할 때 한 방울씩 연속적으로 주입하는 연속투여 방식의 경우가 한번에 주입하는 일괄투여 방식의 경우보다 균일하고 안정한 발포체를 제조하는데 효과적이었다. 교반속도와 계면활성제는 기공 크기와 계면의 window 크기에 상당한 영향을 끼쳤다. 사슬이동제의 첨가는 기공 크기를 증가시켰지만 window 크기는 오히려 감소시켰다. 발포체의 압축 탄성률은 가교결합제의 함량이 증가할수록, 사슬이동제의 함량이 감소할수록 증가하였다.