• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.461-461
• /
• 2013

Over the last decade, zinc oxide (ZnO) thin films have attracted considerable attention owing to large band gap of 3.37 eV and large exciton binding energy of 60 meV at room temperature [1-3]. Recent interest in ZnO related researches has been switched into the fabrication and characterization of low-dimensional nanostructures, such as nano-wires and nano-dots that can be applicable to manufacture the optoelectronic devices such as ultraviolet lasers, light-emitting-diodes and detectors. Since the optical properties of ZnO nano-structures might be distinct from those of bulk materials or thin films, the low-dimensional phenomena should be examined further. In order to utilize such advanced optoelectronic devices, one of the challenges is how to control the surface state related emissions that are drastically increased with increasing the density of the nano-structures and the surface-to-volume ratio. This paper reports the synthesis and characterization of self-assembled ZnO hexagonal nano-disks grown by radio-frequency magnetron sputtering. X-ray diffraction data and scanning electron microscopy data showed that ZnO hexagonal nano-disks were nucleated on top of the flat surfaces as the film thickness reached to 1.56 ${\mu}m$ and then the number of nano-disks increased with increasing the film thickness. The lateral size of hexagonal nano-disks was ~720 nm and height was ~74 nm. The strong photo luminescence spectra obtained at 10 K was also observed, which was assigned to a surface exciton emission at 3.3628 eV arising from the surface sites of hexagonal nano-disks.

• 한국식품영양과학회지
• /
• 제34권5호
• /
• pp.694-699
• /
• 2005

본 연구에서는 버터 대신 탄수화물계 지방대체제인 cornbran fiber를 여러 농도로 첨가하여 머핀을 제조하고 품질특성을 살펴보았다. 지방대체율이 증가할수록 머핀의 부피와 높이는 감소하였고 밝기를 나타내는 L값과 적색도를 나타내는 a값은 감소한 반면 b값은 다소 증가하였다 머핀의 기계적 조직감은 corn bran fiber 대체율이 증가할수록 대조 군보다 hardness, gumminess, springiness 및 brittleness가 증가하였다. 주사전자현미경 측정결과 지방 대체율이 증가함에 따라 머핀내 air cell의 크기가 감소하였고 치밀한 조직구조를 나타내었다. 관능적 특성에서 corn bran fiber로 $30\%$의 지방을 대체한 경우 전체적인 바람직성에서 대조군과 차이가 없는 것으로 나타났다. 이상의 결과를 종합하여 볼 때 기존의 유지 대신 corn bran fiber를 지방대체제로 적정량 사용하여 머핀을 제조한다면 full-fat 머핀과 비교하여 질적으로 뒤지지 않으면서 지방과 열량이 감소된 건강지향적 효과를 기대할 수 있을 것이다.

• 대한치과기공학회지
• /
• 제42권3호
• /
• pp.281-289
• /
• 2020

Purpose: This study analyzes the self-efficacy and CAD/CAM practice of dental technology students with the aim of providing data that will be useful for improving CAD/CAM education. Methods: A questionnaire survey on self-efficacy and CAD/CAM practice was given to students who participated in face-to-face classes in the Department of Dental Technology at a college in Daegu and Gyeongsangnam-do. The survey period was two weeks long (June 15, 2020 to July 2, 2020), and 84 students completed the questionnaire. Results: The higher the self-efficacy, the fewer difficulties or mistakes students made in CAD/CAM practice. The most difficult parts of the scanning process were the top and bottom arc operation and the bite match arc insertion. The most difficult part of the design work was the use of (multiple) tools. The difference between the degree of difficulty and the degree of mistakes during the practical course was shown as the margin line setting in the design work. Setting the margin line was not difficult, but the degree of mistakes was nonetheless high. In the CAM process, height control was the most difficult part, but the degree of mistakes did not differ according to students' self-efficacy. Conclusion: Given that higher self-efficacy correlated with fewer difficulties or mistakes in CAD/CAM practice, students should be encouraged to enhance their self-efficacy. This may be done by improving their satisfaction with their major course of study, forming friendly relations with their colleagues, and increasing the ratio of performance rather than observation in CAD/CAM practice.

• 한국식품조리과학회지
• /
• 제30권6호
• /
• pp.716-725
• /
• 2014

Gelatinization properties and the molecular structure of Korean waxy rice starchesisolated from two japonica types, Sinseonchal, and Dongjinchal, as well as an indica type, Hangangchal 1 were investigated. Sinseonchal is preferred cultivar for making Korean traditional rice cakes and cookies. Sinseonchal starch was the highest in crude protein, amylopectin, damaged starch contents, and water binding capacity among the cultivars tested. The initial pasting temperature ($72.75^{\circ}C$), peak (360.54 RVU), breakdown (162.21 RVU) and setback (30.83 RVU) viscosities of Sinseonchal had the highest values (p<0.05). Onset and peak temperatures by differential scanning calorimeter were also the highest in Sinseonchal. The molecular weight of Sinseonchal amylopectin was 5.46 107higher than those of the other cultivars, but its peak height and area were the lowest among them. The amylopectin peak by HPSEC showed a shoulder in the lower molecular weight portion and its relative area decreased in the following order; Sinseonchal > Dongjinchal > Hangangchal 1. On the branch chain length distribution of amylopectin, the proportion of DP13-24 and DP25-36 showed reverse trends, with higher japonica type amylopectin in DP13-24.

• 한국결정성장학회지
• /
• 제29권1호
• /
• pp.24-31
• /
• 2019

사파이어 단결정을 성장시키는 기존 합성방법들의 원료충진율을 높이기 위한 방법으로 스컬용융법을 사용하여 $Al_2O_3$ 파우더를 용융시켰다. 냉각도가니 크기는 내경 24 cm, 내부 높이 30 cm로서 2.75 MHz 발진주파수에서 15 kg의 $Al_2O_3$ 파우더를 1시간 내에 모두 용융시켰으며, 3시간 동안 융액상태로 유지 후 자연냉각 시켰다. 냉각된 잉곳의 부분별 면밀도 및 성분은 SEM-EDS를 통해 분석하였다. 잉곳의 면밀도 및 $Al_2O_3$ 함량은 고주파유도가열 시 냉각도가니 내부에 형성되는 온도 분포와 관련이 있으며, 온도가 높게 형성되었던 부분이 면밀도 및 순도가 높게 나타나는 경향을 보였다.

• Wind and Structures
• /
• 제28권1호
• /
• pp.31-47
• /
• 2019

The accurate prediction of snow distributions under the wind action on roofs plays an important role in designing structures in civil engineering in regions with heavy snowfall. Affected by some factors such as building shapes, sizes and layouts, the snow drifting on roofs shows more three-dimensional characteristics. Thus, the research on three-dimensional snow distribution is needed. Firstly, four groups of stepped flat roofs are designed, of which the width-height ratio is 3, 4, 5 and 6. Silica sand with average radius of 0.1 mm is used to model the snow particles and then the wind tunnel test of snow drifting on stepped flat roofs is carried out. 3D scanning is used to obtain the snow distribution after the test is finished and the mean mass transport rate is calculated. Next, the wind velocity and duration is determined for numerical simulations based on similarity criteria. The adaptive-mesh method based on radial basis function (RBF) interpolation is used to simulate the dynamic change of snow phase boundary on lower roofs and then a time-marching analysis of steady snow drifting is conducted. The overall trend of numerical results are generally consistent with the wind tunnel tests and field measurements, which validate the accuracy of the numerical simulation. The combination between the wind tunnel test and CFD simulation for three-dimensional typical roofs can provide certain reference to the prediction of the distribution of snow loads on typical roofs.

• The Journal of Advanced Prosthodontics
• /
• 제12권6호
• /
• pp.338-343
• /
• 2020

PURPOSE. The present study aimed to investigate the relationships between the crown form of the upper central incisor and their labial inclination, overbite, and overjet. MATERIALS AND METHODS. Maxillary and mandibular casts of 169 healthy dentitions were subjected to 3D dental scanning, and analyzed using CAD software. The crown forms were divided into tapered, square, and ovoid based on the mesiodistal dimensions at 20% of the crown height to that at 40%. The degree of labial inclination of the upper central incisor was defined as the angle between the occlusal plane and the line connecting the incisal edge and tooth cervix. The incisal edges of the right upper and lower central incisor that in contact with lines parallel to the occlusal plane were used to determine the overbite and overjet. One-way ANOVA was performed to compare the labial inclination, overbite, and overjet among the crown forms. RESULTS. The crown forms were classified into three types; crown forms with a 20%/40% dimension ratio of 1.00±0.01 were defined as square, >1.01 as tapered, and <0.99 as ovoid. The labial inclination degree was the greatest in tapered and the least in square. Both overbite and overjet in tapered and ovoid were higher than those in square. CONCLUSION. Upper central incisor crown forms were related to their labial inclination, overbite, and overjet. It was suggested that the labial inclination, overbite, and overjet should be taken into consideration for the prosthetic treatment or restoring the front teeth crowns.

• Journal of Veterinary Science
• /
• 제23권3호
• /
• pp.44.1-44.10
• /
• 2022

Background: The equine temporomandibular joint (TMJ) has a complex anatomical structure that makes diagnosis of TMJ disorders difficult. Computed tomography (CT) is now available in equine medicine; hence, TMJ evaluation has become more convenient. Objectives: The objectives of this study were to describe the CT features of the TMJ in Jeju horses and to compare these features with those of Thoroughbreds. Methods: In this report, the TMJs of 10 Jeju horses (mean age: 4.5 ± 1.9 yr; mean body weight: 282.6 ± 40.3 kg) and 6 Thoroughbreds (mean age: 7.3 ± 1.6 yr; mean body weight: 479.7 ± 44.0 kg) were examined using CT. After CT scanning, the Hounsfield units (HU) and height to width ratio (H:W) of the mandibular condyle were measured. Results: The mean H:W in Jeju horses was significantly lower than that in Thoroughbreds. The mean HU in Jeju horses was lower than that in Thoroughbreds; however, the difference was not significant. The most frequent CT finding was an irregular medial margin of the mandibular condyle in both breeds. Conclusions: In this study, the shape of the mandibular condyle in Jeju horses was flatter than that in Thoroughbreds. This report could be useful in evaluating the TMJ in Jeju horses. Moreover, CT could be a pragmatic choice for the examination of the TMJ in horses.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.138-143
• /
• 2022

We analyzed the influence of post-annealing on Ga₂O₃/n-type 4H-SiC heterojunction diode. Gallium oxide (Ga₂O₃) thin films were deposited by radio frequency (RF) sputtering. Post-deposition annealing at 950℃ in an Oxygen atmosphere was performed. The material properties of Ga₂O₃ and the electrical properties of the diodes were investigated. Atomic Force Microscopy (AFM), X-Ray Diffraction and Scanning Electron Microscope (SEM) images show a significant increase in the roughness and crystallinity of the O₂-annealed films. After Oxygen annealing X-ray Photoelectron Spectroscopy (XPS) shows that the atomic ratio of oxygen increases which is related to a decrease in oxygen vacancy within the Ga₂O₃ film. The O₂-annealed diodes exhibited higher on-current and lower leakage current. Moreover, the ideality factor, barrier height, and thermal activation energy were derived from the current-voltage curve by increasing the temperature from 298 - 434K.

• Journal of Korean Dental Science
• /
• 제16권2호
• /
• pp.172-181
• /
• 2023

Purpose: To investigate the effect of epidermal growth factor (EGF) with collagen matrix (CM) for increasing gingival thickness. Materials and Methods: In five mongrel dogs, bilateral gingival defects were surgically made on the maxillary canines. After two months, either a subepithelial connective tissue graft (group SCTG) or CM with EGF (0.1 ug/ml, group EGF) was grafted, and the flap was coronally positioned to cover the graft materials. The animals were sacrificed after three months. Intraoral scanning was performed for soft tissue analysis. Histologic and histomorphometric analyses were performed. Result: Two animals exhibited wound dehiscence during the healing phase, leaving three for analysis. No statistically significant difference was found in soft tissue changes (P>0.05). The level of gingival margin (GM) increased in both groups (1.02±0.74 mm in group SCTG vs. 1.24±0.83 mm in group EGF). Linear increases at the GM pre-augmentation in the soft tissue profile were 1.08±0.58 mm in group SCTG and 0.96±0.73 mm in group EGF. Histomorphometric parameters (keratinized tissue height, tissue thickness, and rete peg density) were not significantly different between the groups (P>0.05). Conclusion: EGF loaded onto CM led to comparable gingival phenotype enhancement to SCTG.