• The Journal of Advanced Prosthodontics
• /
• 제7권1호
• /
• pp.69-75
• /
• 2015

PURPOSE. To compare the shear bond strength of various veneering materials to grade II commercially pure titanium (CP-Ti). MATERIALS AND METHODS. Thirty specimens of CP-Ti disc with 9 mm diameter and 10 mm height were divided into three experimental groups. Each group was bonded to heat-polymerized acrylic resin (Lucitone 199), porcelain (Triceram), and indirect composite (Sinfony) with 7 mm diameter and 2 mm height. For the control group (n=10), Lucitone 199 were applied on type IV gold alloy castings. All samples were thermocycled for 5000 cycles in $5-55^{\circ}C$ water. The maximum shear bond strength (MPa) was measured with a Universal Testing Machine. After the shear bond strength test, the failure mode was assessed with an optic microscope and a scanning electron microscope. Statistical analysis was carried out with a Kruskal-Wallis Test and Mann-Whitney Test. RESULTS. The mean shear bond strength and standard deviations for experimental groups were as follows: Ti-Lucitone 199 ($12.11{\pm}4.44$ MPa); Ti-Triceram ($11.09{\pm}1.66$ MPa); Ti-Sinfony ($4.32{\pm}0.64$ MPa). All of these experimental groups showed lower shear bond strength than the control group ($16.14{\pm}1.89$ MPa). However, there was no statistically significant difference between the Ti-Lucitone 199 group and the control group, and the Ti-Lucitone 199 group and the Ti-Triceram group. Most of the failure patterns in all experimental groups were adhesive failures. CONCLUSION. The shear bond strength of veneering materials such as heat-polymerized acrylic resin, porcelain, and indirect composite to CP-Ti was compatible to that of heatpolymerized acrylic resin to cast gold alloy.

• 동아시아식생활학회지
• /
• 제20권2호
• /
• pp.272-278
• /
• 2010

Various quality attributes were determined in muffins prepared using purple-colored sweet potato flour. Height of control muffins was 5.8 cm lease clarify. Height decreased with increasing quantity of sweet potato powder. Muffin volume was not appreciably affected. Moisture of control muffins was 21.84. The moisture value decreased with increasing quantity of sweet potato powder. Scanning electron microscopy examination revealed thick cell wall and rough stoma in muffins prepared with purple-colored sweet potato powder. The amount of gluten decreased as the quantity of purple-colored sweet potato powder increased. Brightness L values significantly changed as the amount of powder increased, indicative of a progressively darker product. Red index a values decreased as the quantity of purple-colored sweet potato powder increased. Yellow index b values decreased significantly in the control group as powder quantity increased. Hardness increased with increasing addition of powder, but no significant difference was evident between 6% and 9% amended samples. There were also no significant differences in springing in samples containing 3% and 6% powder but 9% powder produced a significant difference. Cohesiveness did not differ in unamended samples and samples amended with 3% and 9% powder, however a significant difference was evident in samples prepared with 6% powder. Gumminess and chewiness increased as the quantity of purple-colored sweet potato powder increased. Color did not differ appreciably in sample prepared with 3% and 9% Sample prepared with 3% additives showed the highest What? Color score? Something else? Please clarify with 6.4. There was no significant difference of the flavor in samples prepared with 3% and 6% powder, or in taste among samples prepared 3%, 6%, and 9% powder. No significant differences in texture were evident in any sample Overall acceptability was highest (7.2) in samples prepared with 3% of purple-colored sweet potato.

• 대한공간정보학회지
• /
• 제19권1호
• /
• pp.79-86
• /
• 2011

최근 수치표고모델(DEM : Digital Elevation Model)을 구축하기 위한 목적으로 항공레이저측량(LiDAR : Light Detection And Ranging) 기술이 주목받고 있다. DEM은 항공레이저측량으로부터 획득된 라이다 데이터에서 지면점만 추출한 수치지면자료(DTD : Digital Terrain Data)의 정확성에 의해 그 품질이 좌우된다. 하지만 원시자료에서 수치지면자료를 추출하기 위한 자동 필터링 작업은 필터링 알고리즘의 한계 및 라이다 데이터의 고유한 특성으로 인하여 항상 오분류 영역이 발생한다. 따라서 이를 보완하기 위해서는 작업자에 의한 수동분류 작업이 반드시 필요하다. 본 연구에서는 수동 작업이 원활하게 이루어 질 수 있도록 자동 필터링 작업에서 얻어진 수치지면자료에서 오분류 될 가능성이 있는 영역을 자동으로 탐지하는 알고리즘을 제안한다. 제안된 알고리즘은 2D 격자 구조를 적용하였으며 'Slope Angle', 'Slope DeltaH', 'NNMaxDH(Nearest Neighbor Max Delta Height)'로 명명한 매개변수를 사용하였다. 실험 결과, 제안된 알고리즘은 지형형태나 라이다 데이터 평균 점밀도에 제한받지 않는 안정적인 결과를 보여주었다.

• 동아시아식생활학회지
• /
• 제19권4호
• /
• pp.635-640
• /
• 2009

In this study, muffins were made with the addition of 0%, 3%, 6% and 9% of Chungkukjang powder and, the quality characteristics, such as volume, height, appearance, chromaticity and moisture contents, were measured using SEM (Scanning Electronic Microscope) measurement, texture tests and sensory tests. In the regards to volume, as the added amount of added Chungkukjang increased, the volume also increased. There was no significant difference in the height and moisture content of the muffins at the different Chungkukjang powder concentrations. Using SEM, it was shown that as the amount of added Chungkukjang increased, the gluten content decreased, which in turn caused the formation of thick cell membranes and rough pores and reduced gluten composition capacity. Luminosity L value in Chungkukjang muffin decreased as the amount of added Chungkukjang powder increased. There was significant difference in the red chromaticity a value and yellow chromaticity b value among the samples (p<0.05). The results of the texture test showed that the hardness of the Chungkukjang muffin decreased as the amount of added Chungkukjang increased. In addition, as the amount of added Chungkukjang increased, the adhesiveness decreased. There was no significant difference in springing, chewiness and gumminess among the samples. There was a significant difference in the cohesiveness among all other samples in cohesiveness (p<0.05). The results of the sensory test showed that the wave form of the Chungkukjang muffin decreased as the amount of added Chungkukjang increased. The pore of the muffin increased as the amount of added Chungkukjang increased. The color quality of the muffin decreased as the amount of added Chungkukjang increased. In terms of overall acceptability, 6% Chungkukjang was shown to result in the highest preference level.

• 대한치과기공학회지
• /
• 제41권2호
• /
• pp.71-80
• /
• 2019

Purpose: In this study, to evaluate the effect of oxide changes on the shear bond strength according to the composition of Ni-Cr alloys for porcelain fused matal crown, T-4 alloys, Zeroy alloys and Zeroy-X alloys were selected. Methods: 20 specimens were fabricated using selected Ni-Cr alloys and porcelain powders. A Ni-Cr alloy having a diameter of 5 mm and a height of 25 mm was produced and the metal surface was polished. Porcelain powder was fired on the polished metal surface to a diameter of 5 mm and a height of 3 mm. The experiment group consisted of three groups, T-4(TNA), Zeroy(ZNA) and Zeroy-X(ZXA). The fabricated specimens were mounted on a jig of a universal testing machine(UTM) and fracture strength was measured by applying a shear force at a UTM crosshead speed of 0.5 mm/min. The fracture strength was calculated as the bond strength between the porcelain and the alloy. The surface of the fractured alloy was analyzed by X-ray diffraction(XRD) and scanning electron microscopy(SEM), and the components of the oxide were measured by energy dispersive X-ray spectroscopy(EDX) line profile method. Results: In SEM, XRD and EDX analysis, yttrium tended to increase the mechanical and chemical bonding forces. The shear bond strength of ZXA group containing yttrium showed the highest value at 27.53 MPa. Conclusion: Based on the results of this study, it is considered that the yttrium-added Ni-Cr alloy is clinically acceptable in porcelain shear bond strength.

• 대한금속재료학회지
• /
• 제49권5호
• /
• pp.411-418
• /
• 2011

The current study investigates the electroplating characteristics of Sn-Cu eutectic micro-bumps electroplated on a Si chip for flip chip application. Under bump metallization (UBM) layers consisting of Cr, Cu, Ni and Au sequentially from bottom to top with the aim of achieving Sn-Cu bumps $10\times10\times6$ ${\mu}m$ in size, with 20${\mu}m$ pitch. In order to determine optimal plating parameters, the polarization curve, current density and plating time were analyzed. Experimental results showed the equilibrium potential from the Sn-Cu polarization curve is -0.465 V, which is attained when Sn-Cu electro-deposition occurred. The thickness of the electroplated bumps increased with rising current density and plating time up to 20 mA/$cm^2$ and 30 min respectively. The near eutectic composition of the Sn-0.72wt%Cu bump was obtained by plating at 10 mA/$cm^2$ for 20 min, and the bump size at these conditions was $10\times10\times6$ ${\mu}m$. The shear strength of the eutectic Sn-Cu bump was 9.0 gf when the shearing tip height was 50% of the bump height.

• Journal of Periodontal and Implant Science
• /
• 제53권6호
• /
• pp.417-428
• /
• 2023

Purpose: To investigate the effect of xenogeneic collagen matrix (XCM) with polydeoxyribonucleotide (PDRN) for gingival phenotype modification compared to autogenous connective tissue graft. Methods: Five mongrel dogs were used in this study. Box-type gingival defects were surgically created bilaterally on the maxillary canines 8 weeks before gingival augmentation. A coronally positioned flap was performed with either a subepithelial connective tissue graft (SCTG) or XCM with PDRN (2.0 mg/mL). The animals were sacrificed after 12 weeks. Intraoral scanning was performed for soft tissue analysis, and histologic and histomorphometric analyses were performed. Results: One animal exhibited wound dehiscence, leaving 4 for analysis. Superimposition of STL files revealed no significant difference in the amount of gingival thickness increase (ranging from 0.69±0.25 mm to 0.80±0.31 mm in group SCTG and from 0.48±0.25 mm to 0.85±0.44 mm in group PDRN; P>0.05). Histomorphometric analysis showed no significant differences between the groups in supracrestal gingival tissue height, keratinized tissue height, tissue thickness, and rete peg density (P>0.05). Conclusions: XCM soaked with PDRN yielded comparable gingival augmentation to SCTG.

• 전자공학회논문지
• /
• 제50권8호
• /
• pp.253-263
• /
• 2013

광학측정기법 중 주파수 스캐닝 간섭계는 기존 3차원 측정기법과 비교하여 광학 하드웨어 구조가 측정과정동안 고정되어 있어, 대물렌즈나 대상물체의 수직 스캐닝 없이 단지 광원의 주파수만 특정한 주파수 밴드내에서 스캐닝 하여 대상물체에 주사되므로, 우수한 광학 측정 성능을 보인다. 광원의 주파수를 변경하여 간섭계를 통해 간섭 영상을 획득한 후, 밝기 영상 데이터를 주파수 영역 데이터로 변환하고, 고속 푸리에 변환을 통한 주파수 분석을 이용하여 대상 물체의 높이 정보를 계측한다. 하지만, 대상물체의 광학적 특성에 기인한 광학노이즈와 주파수 스캐닝동안 획득되는 영상의 수에 따라 증가하는 영상처리시간은 여전히 주파수 스캐닝 간섭계의 문제이다. 이를 위해, 1) 편광기반 주파수 스캐닝 간섭계가 광학 노이즈에 대한 강인성을 확보하기 위해 제안되어진다. 시스템은 주파수 변조 레이저, 참조 거울 앞단의 ${\lambda}/4$ 판, 대상 물체 앞단의 ${\lambda}/4$ 판, 편광 광분배기, 이미지 센서 앞단의 편광기, 광섬유 광원 앞단의 편광기, 편광 광분배기와 광원의 편광기 사이에 위치하는 ${\lambda}/2$ 판으로 구성된다. 제안된 시스템을 이용하여, 편광을 기반으로한 간섭이미지의 대조대비를 조절할 수 있다. 2) 신호처리 고속화 방법이 간섭계 시스템을 위해 제안되며, 이는 그래픽 처리 유닛(GPU)과 같은 병렬처리 하드웨어와 계산 통합 기기 구조(CUDA)와 같은 프로그래밍 언어로 구현된다. 제안된 방법을 통해 신호처리 시간은 실시간 처리가 가능한 작업시간을 얻을 수 있었다. 최종적으로 다양한 실험을 통해 제안된 시스템을 정확도와 신호처리 시간의 관점으로 평가하였고, 실험결과를 통해 제안한 시스템이 광학측정기법의 실적용을 위해 효율적임을 보였다.

• 한국진공학회지
• /
• 제15권1호
• /
• pp.37-44
• /
• 2006

초고진공 아래에서 주사터널링현미경을 이용해서 $495^{\circ}C$의 Si(5 5 12) 기판에 호모에피텍시를 시도하여 층상성장의 미세한 과정을 연구하였다 최초에는 Si Dimer가 기본블록이 되어 Si(5 5 12) 단위세포 내 (337)과 (225) 부분의 Si Dimer/Adatom 자리에 우선적으로 흡착하여 Si(5 5 12) 단위세포는 Si addimer로 채워진 $3\times(337)$ 세부 부분과 $1\times(113)$ 세부 부분으로 변한다. 이 과정 중 Si(5 5 12) 단위세포 내 또 다른 (337)에 있는 Tetramer는 Si Dimer를 흡착할 수 있는 Dimer/Adatom 자리로 변환한다 추가적인 Si 흡착으로 각각의 (337) 부분은 (112)과 (113)으로 나뉘어, 마침내 Si(5 5 12) 단위세포는 $3\times(112)\;와\; 4\times(113)$의 패싯들로 바뀐다. 이 단계에서 벌집사슬형과 Dimer/Adatom의 1차원 구조의 상호 변환이 선택적으로 일어난다. 기판의 단위세포 주기를 가지는 패싯의 높이는 2.34 효까지 성장하며, 끝으로 이 패싯 사이의 골짜기가 채워진다. 마지막 단계가 끝나면 균일하고 평평한 Si(5 5 12) 테라스가 복원된다. 본 연구로부터 Si(5 5 12) 호모에피텍시가 단위세포 당 28 개의 Si 원자가 흡착됨으로써 주기적으로 이루어지고, 기판 단위세포 내에서 패시팅이 균일한 오버레이어 필름 두께를 유도하는 데에 결정적 역할을 한다는 점에서 그 성장 방식이 독특하다고 할 수 있다.

• 대한소아치과학회지
• /
• 제45권1호
• /
• pp.41-56
• /
• 2018

본 연구의 목적은 한국인의 상악 유중절치와 유측절치와 기성 지르코니아 크라운의 형태 및 크기를 3차원적으로 분석함으로써 가장 유사한 지르코니아 크라운을 선별하고 수복시 임상적 지침을 제시하는 것이다. 이를 위해 300명의 어린이의 건전한 상태의 상악 유중절치, 유측절치를 3차원 스캔하여 평균 형태를 재현하였고, 4개의 제조사(NuSmile $ZR^{(R)}$ Crown, Cheng $Crowns^{(R)}$, Kinder $Krowns^{(R)}$, EZ $Pedo^{(R)}$ Crown)의 지르코니아 크라운을 3차원 스캔하여 형태 및 크기 비교를 위한 좌표점을 측정하여 치아와 크라운 형태의 유사성을 평가하였다. 근원심 길이, 절단연에서 치경부까지의 길이, 치관 형태 비율, 같은 좌표에서 치아와 크라운의 거리, 순면의 곡률반경, 그리고 체적을 비교하여 최종적으로 가장 유사한 지르코니아 크라운을 선별하였다. 분석 결과, 상악 유중절치는 Cheng $Crowns^{(R)}$ 3번, 유측절치는 NuSmile $ZR^{(R)}$ Crown 2번이 가장 유사한 형태를 가졌으며, 이 크라운의 내면을 스캔하여 크라운 수복시 필요한 치아 삭제량을 평가한 결과, 기존의 제조사의 가이드라인으로 제시되어 있는 양보다 전반적으로 더 적은 치아 삭제를 시행하는 것을 제안할 수 있다.