• Imaging Science in Dentistry
• /
• 제53권1호
• /
• pp.21-26
• /
• 2023

Purpose: A fully digital approach to oral prosthodontic rehabilitation requires the possibility of combining (i.e., registering) digital documentation from different sources. This becomes more complex in an edentulous jaw, as fixed dental markers to perform reliable registration are lacking. This validation study aimed to evaluate the reproducibility of 1) intraoral scanning and 2) soft tissue-based registration of an intraoral scan with a cone-beam computed tomography (CBCT) scan for a fully edentulous upper jaw. Materials and Methods: Two observers independently performed intraoral scans of the upper jaw in 14 fully edentulous patients. The palatal vault of both surface models was aligned, and the inter-observer variability was assessed by calculating the mean inter-surface distance at the level of the alveolar crest. Additionally, a CBCT scan of all patients was obtained and a soft tissue surface model was generated using patient-specific gray values. This CBCT soft tissue model was registered with the intraoral scans of both observers, and the intraclass correlation coefficient(ICC) was calculated to evaluate the reproducibility of the registration method. Results: The mean inter-observer deviation when performing an intraoral scan of the fully edentulous upper jaw was 0.10±0.09 mm. The inter-observer agreement for the soft tissue-based registration method was excellent(ICC=0.94; 95% confidence interval, 0.81-0.98). Conclusion: Even when teeth are lacking, intraoral scanning of the jaw and soft tissue-based registration of an intraoral scan with a CBCT scan can be performed with a high degree of precision.

• 제어로봇시스템학회논문지
• /
• 제10권2호
• /
• pp.178-184
• /
• 2004

In this paper, we designed an image processing system for the high speed line-scan camera which adopts the new memory model we proposed. As a resolution and a data rate of the line-scan camera are becoming higher, the faster image processing systems are needed. But many conventional systems are not sufficient to process the image data from the line-scan camera during a very short time. We designed the memory controller which eliminates the time for transferring image data from the line-scan camera to the main memory with high-speed SRAM and has a dual-port configuration therefore the DSP can access the main memory even though the memory controller are writing the image data. The memory controller is implemented by VHDL and Xilinx SPARTAN-IIE FPGA.

• 전자공학회논문지S
• /
• 제35S권5호
• /
• pp.35-41
• /
• 1998

This paper presents a decoupling controller of the missile seeker scan loop with a spin-stabilized platform. A precise seeker motion with respect to the scan command is essential for the higher acquisition probability of the target. As the seeker scan loop is a deeply cross-coupled two input two output system, an accurate pointing or scanning for each axis to the target is very difficult, even though provided with the help of a high performance controller. When a decoupling control is applied to the seeker scan loop, the cross-coupling between two axes can be reduced to a remarkable amount. As a low order of controller is required for the real time operation, a PI controller with decoupling filter is suggested and compared with other controllers. A linearized dynamic model of seeker scan loop is used and validated through the comparison of experimental results of step responses.

• 한국멀티미디어학회논문지
• /
• 제22권12호
• /
• pp.1385-1395
• /
• 2019

In this paper, we propose a method to fabricate a patient-specific breast implant using MRI images and 3D scan data. Existing breast implants for breast reconstruction surgery are primarily fabricated products for shaping, and among the limited types of implants, products similar to the patient's breast have been used. In fact, the larger the difference between the shape of the breast and the implant, the more frequent the postoperative side effects and the lower the satisfaction. Previous researches on the fabrication of patient-specific breast implants have used limited information based on only MRI images or on only 3D scan data. In this paper, we propose an algorithm for the fabrication of patient-specific breast implants that combines MRI images with 3D scan data, considering anatomical suitability for external shape, volume, and pectoral muscle. Experimental results show that we can produce precise breast implants using the proposed algorithm.

• 한국인터넷방송통신학회논문지
• /
• 제11권4호
• /
• pp.113-118
• /
• 2011

서열 상동성 분석은 생명현상에 관여하는 물질을 정렬, 색인하여 데이터베이스 하는 것으로, 생명정보학의 유용성을 입증하는 분야이다. 본 논문에서는 구조가 복잡한 진핵생물의 서열 패턴을 단백질 서열로 변환하기 위해 은닉마르코프모델을 이용하는 GenScan 프로그램을 이용한다. 서열상동성 분석 중 최소거리 탐색 문제는 문제의 크기가 커지면 계산량이 기하급수적으로 증가하여 정확한 계산이 불가능해진다. 따라서 유사한 아미노산간의 치환과 상이한 아미노산간의 치환 점수를 차등화한 점수표를 적용하고, 은닉마르코프모델 등을 적용해 정교한 전이 확률모델을 적용한다. 변환된 서열을 서열 상동성 분석을 위해 사용되는 blast p를 이용하여, 은닉 마르코프 모델을 도입함으로 인해 단백질 구조 서열로 변환하는 데에 있어서 우수한 기능을 제공함을 알 수 있다.

• 한국정밀공학회지
• /
• 제12권10호
• /
• pp.157-165
• /
• 1995

The new formulation of designing the two degree of freedom(TDF) robust controller is proposed using $H_{\infty}$optimization and model matching method. In this formulation the feedback controller and feedforward controller are designed in a single step using $H_{\infty}$optimization procedure. Roughly speaking, the feedback controller is designed to meet robust stability and disturbance rejection specifications, while the feedforward controller is used to improve the robust model matching properties of the closed loop system. The proposed formulation will be illustrated and evaluated on a seeker scan-loop. And the performances of TDF robust controller are compared with those of the $H_{\infty}$ controller designed using Loop Shaping Design Procedure proposed by McFarlane and Glover.lover.

• 대한전자공학회논문지SP
• /
• 제42권6호
• /
• pp.159-166
• /
• 2005

레이더의 스캔특성에 의해 ES 시스템에 수신된 탐색 레이더 신호의 펄스세기는 펄스마다 일정하지 않다. 이러한 펄스세기의 변화는 ES 탐지손실을 유발하므로 스캔에 따른 탐지손실을 ES 탐지거리 방정식에 고려하여야 한다. 본 논문에서는 원형스캔에 대하여 ES 탐지손실을 이론적으로 분석하고, 정량적으로 예측할 수 있는 모델을 제안하였다. 실제 레이더에 대해 탐지손실을 측정한 결과, 제안된 모델이 원형 스캔에 관계된 ES 탐지손실 모델로 적합함을 알 수 있었다.

• 디지털융복합연구
• /
• 제15권7호
• /
• pp.393-400
• /
• 2017

일반적으로 특수영상 및 3D 애니메이션 제작에서 캐릭터와 배경을 3D 모델링을 할 때 MAYA나 3DS MAX 등의 3D 프로그램을 사용하여 제작한다. 그러나 이러한 제작방식은 작업 시간이 많이 소요될 뿐만 아니라 고비용이 발생한다. 본 연구에서는 2D 포토스캔 제작기술을 활용한 3D 모델링 제작방법의 우수성과 효율성을 증명하기 위하여 두 가지 실험을 하였다. 첫 번째, 동일한 오브젝트를 다양한 방법으로 모델링을 하였다. 두 번째, 동일한 백그라운드를 각기 다른 방법을 이용하여 모델링을 하였다. 이 두 가지 실험을 통하여 효과적인 2D 포토스캔 제작방법으로 모델링 시 유의해야할 사항과 제작기술 등을 제시하였다. 또한 실험에 따른 결과물을 바탕으로 2D 포토스캔 모델링 제작방법의 효율성과 우수성을 증명하였다.

• 대한치과기공학회지
• /
• 제41권2호
• /
• pp.53-61
• /
• 2019

Purpose: The purpose of this study is to evaluate the discrepancy of scan process in dental intra oral scanner by comparing model scanner and anticipate possibility to introduce intra oral scan technique. Methods: 3D superimposition test was conducted to compare the scan discrepancy. The scanners used in this study are the e-oral scanner, the D750 model scanner, and the high precision CMM(3D Coordinate Measuring Machine). The standard of accuracy verification is ISO 5725-1; trueness and precision. Master model was manufactured by dental stone and scanned 5 times by intra oral, model scanner. Reference data was scanned 5 times by high accuracy CMM to evaluate the trueness. Results: Trueness of D750 scanner were $7.4{\mu}m$ $5.1{\mu}m$ $6.8{\mu}m$ at an abutment, an occluasal, a specific area. and trueness of e-scanner were $20.2{\mu}m$ $27.4{\mu}m$ $37.8{\mu}m$ at an abutment, an occluasal, a specific area. Precision of D750 scanner was $7.04{\mu}m$, e-scanner was $15.95{\mu}m$. Conclusion: When conducting in vitro test, The mean difference of trueness between e-scanner and D750 were $12.8{\mu}m$ at an abutment area, $22.3{\mu}m$ at an occlusal area, $31.0{\mu}m$ at a specific area and $8.91{\mu}m$ in precision. The scan discrepancies are within the range of clinical acceptance.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.917-919
• /
• 2003

This paper demonstrates that RADARSAT ScanSAR data can be an important data source of radar remote sensing for monitoring crop systems and estimation of rice yield for large areas in tropic and sub-tropical regions. Experiments were carried out to show the effectiveness of RADARSAT ScanSAR data for rice yield estimation in whole province of Guangdong, South China. A methodology was developed to deal with a series of issues in extracting rice information from the ScanSAR data, such as topographic influences, levels of agro-management, irregular distribution of paddy fields and different rice cropping systems. A model was provided for rice yield estimation based on the relationship between the backscatter coefficient of multi-temporal SAR data and the biomass of rice.