• 한국멀티미디어학회논문지
• /
• 제4권6호
• /
• pp.570-578
• /
• 2001

경계 주사 구조(Boundary Scan Architecture)기 법은 복잡한 인쇄 회로 기판(PCB : Printed Circuit Board)을 테스트하기 위해 도입되었다. 이러한 경계 주사 구조는 시스템의 정상 동작에 간섭을 주지 않고 시스템의 동작 상태를 실시간 모니터링 하는데 대단한 잠재력을 지니고 있다. 본 논문에서는 경계 주사 구조를 이용하여 시스템의 작동 상태를 실시간으로 모니터 하기 위한 새로운 실장 제어기를 제안하고 설계한다. 제안된 실시간 모니터링 실장 제어기는 경계 주사 구조의 경계 주사 셀 제어기(Test Access Port Controller)와 범용 실장 제어기(Embedded Controller)로 구성되어 있다. 제안된 경계 주사 구조를 이용한 실시간 모니터링 실장제어기는 하드와이어의 자원을 절약해 주고 경계 주사 구조를 지니고 있는 칩에 쉽게 인터페이스 된다. 실험 결과는 제안된 실장제어 기가 시스템의 동작 상태를 실시간 모니터 하는데 호스트 컴퓨터에 의한 모니터 링에 비해 효과적임을 보여준다.

• 한국정밀공학회지
• /
• 제11권2호
• /
• pp.110-119
• /
• 1994

The Robust Controller for scan-loop is designed using LQG/LTR Methodology. The design and analysis of spiral, rosette and conical scan patterns are discussed. The perfermance and robustness of the LQG/LTR controller are analyzed through experiments and cpmpared with those of the P-controller. Especially to improve the scan performance at large look angle, the cage coil output is linearized using a binomial equation. It is demonstrated that the scan-loop system by the LQG/LTR control is very robust to phase uncertainties.

• 전자공학회논문지S
• /
• 제35S권5호
• /
• pp.35-41
• /
• 1998

This paper presents a decoupling controller of the missile seeker scan loop with a spin-stabilized platform. A precise seeker motion with respect to the scan command is essential for the higher acquisition probability of the target. As the seeker scan loop is a deeply cross-coupled two input two output system, an accurate pointing or scanning for each axis to the target is very difficult, even though provided with the help of a high performance controller. When a decoupling control is applied to the seeker scan loop, the cross-coupling between two axes can be reduced to a remarkable amount. As a low order of controller is required for the real time operation, a PI controller with decoupling filter is suggested and compared with other controllers. A linearized dynamic model of seeker scan loop is used and validated through the comparison of experimental results of step responses.

• 한국정밀공학회지
• /
• 제12권1호
• /
• pp.78-86
• /
• 1995

$H_{\infty}$ Controller of seeker scan-loop is designed using LSDP proposed by McFarlane. The performance and robustness of $H_{\infty}$ controller are analyzed using robustness theorems by Lehtomaki and compared with those of the LQG/LTR controller. Especially, structured singular value .mu. -test of Doyle is used to evaluate robust performance of seeker scan-loop. It is demonstated that seeker scan-loop by $H_{\infty}$ controller is very robust to model uncertainties described by additive and multiplicative perturbations.

• 한국정밀공학회지
• /
• 제12권10호
• /
• pp.157-165
• /
• 1995

The new formulation of designing the two degree of freedom(TDF) robust controller is proposed using $H_{\infty}$optimization and model matching method. In this formulation the feedback controller and feedforward controller are designed in a single step using $H_{\infty}$optimization procedure. Roughly speaking, the feedback controller is designed to meet robust stability and disturbance rejection specifications, while the feedforward controller is used to improve the robust model matching properties of the closed loop system. The proposed formulation will be illustrated and evaluated on a seeker scan-loop. And the performances of TDF robust controller are compared with those of the $H_{\infty}$ controller designed using Loop Shaping Design Procedure proposed by McFarlane and Glover.lover.

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.102-109
• /
• 1997

A two-degree-of freedom (TDF) $H_{\infty}$controller for a seeker scan loop is presented for the purpose of improving scanning performances. The perturbed plant model is characterized via the normalized coprime factorization. The TDF $H_{\infty}$controller is designed based on the loop shaping design procedure and model matching approach, and its performances are evaluated and compared with those of a previous work. It is demonstrated that the proposed TDF $H_{\infty}$controller is more effective to the control of the seeker scan loop than the previous controller.oller.

• 제어로봇시스템학회논문지
• /
• 제10권2호
• /
• pp.178-184
• /
• 2004

In this paper, we designed an image processing system for the high speed line-scan camera which adopts the new memory model we proposed. As a resolution and a data rate of the line-scan camera are becoming higher, the faster image processing systems are needed. But many conventional systems are not sufficient to process the image data from the line-scan camera during a very short time. We designed the memory controller which eliminates the time for transferring image data from the line-scan camera to the main memory with high-speed SRAM and has a dual-port configuration therefore the DSP can access the main memory even though the memory controller are writing the image data. The memory controller is implemented by VHDL and Xilinx SPARTAN-IIE FPGA.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.687-692
• /
• 1993

This paper deals with the generation of laser scan path for manufacturing 3-dimensional body using StereoLithography. The purpose of this study is to develop one module of the StersoLithography system(SLA) for Rapid Protyping and Manufacturing. AutoCAD system is used to supply CAD information from model. The X-Y controller which was made for a special purpose is used to test this system. The system software developed is composed of 3 main modules, the first module is calculating the boundary point os laser scan path. The scound module is generating final output file which is used to down load on the controller. The result of this study shows a good algorithm to generate laser scan path on the basis of simple mathematical background.

• 대한전자공학회논문지SD
• /
• 제45권2호
• /
• pp.61-68
• /
• 2008

본 논문에서는 Advanced Microcontroller Bus Architecture(AMBA) 기반 System-on-Chip(SoC) 테스트를 위한 임베디드 코어 테스트 래퍼를 제시한다. IEEE 1500 과의 호환성을 유지하면서 ARM의 Test Interface Controller(TIC)로도 테스트가 가능한 테스트 래퍼를 설계한다. IEEE 1500 래퍼의 입출력 경계 레지스터를 테스트 패턴 입력과 테스트 결과 출력을 저장하는 임시 레지스터로 활용하고 변형된 테스트 절차를 적용함으로써 Scan In과 Scan Out 뿐만 아니라 PI 인가와 PO 관측도 병행하도록 하여 테스트 시간을 단축시킨다.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.60-70
• /
• 1999

An efficient automatic inspection system for Floating Seal is developed, The proposed system consists of a high resolution line scan camera, microcomputer, and PLC (Programmable Logic Controller). In order to perform rapid inspection, The ROI (Region of Interest) is extracted from the original image. There are types of defects; shape defects and surface defects. Each features of defects are captured by edge detect, segmentation, morphological operation, and threshold analysis. PLC controller is used to synchronize the whole system and store the inspection results temporarily to reduce the overhead of microcomputer. As a result, the system is being utilized successfully in a teal inspection line.