• 디자인학연구
• /
• 제15권1호
• /
• pp.359-368
• /
• 2002

섬유예술은 현대 미술운동의 하나로 부각되었고, 그 중에서도 타피스트리는 인간의 역사와 함께 시작되어 지금가지 전시회와 다양한 형태를 통해 선보이고 있고 점점 깊이 연구되고 있다. 그러나 이 작업과정은 광대한 크기로 인해 시간적 육체적 노력이 엄청나게 요구된다. 현 상황은 샘플작업을 한 뒤 본 작업에 들어가는데 마무리 작업을 할 때까지 그 느낌을 잘 알 수 없기 때문에 완성단계에서도 마음에 들지 않으면 다시 작업을 하는 경우가 많이 있다. 이런 문제점을 보완하기 위해서 미리 컴퓨터를 통하여 확인 후 수정을 거쳐 결과물을 볼 수 있도록 하여 창작의 시간을 늘이고 불필요한 시간을 없애고자 시뮬레이션이 연구되었 다. 이 시뮬레이션의 주된 내용은 스캔, 드로잉, 라인 클린 업, 필업, 렌더링, 내역 조회의 과정을 거쳐 프린트 할 수 있도록 구성되었다. 내용은 스캔과 드로잉에서 아이디어 창출을 하고 라인 클린 업에서 벡터 이미지로 만든 다음 실의 느낌을 주고 수정을 한다. 이 이미지를 렌더링하고 실의 길이와 무게 가격 조회를 한 후 프린트하는 전과정을 시뮬레이션 하는 패키지 소프트웨어를 프로토타입으로 제작한 것이다. 이런 과정을 통해 타피스트리를 하는 여러 작가들과 학생들에게 보다 쉽게 접하고 미연에 불필요한 노력과 시간들을 줄일 수 있도록 연구 개발되었다.

• 복식문화연구
• /
• 제24권3호
• /
• pp.315-323
• /
• 2016

The present study is intended to study sole types necessary for shoe designs for elementary school students that are in age groups in growth periods, and 3D midsole design utilizing 3D printing technology. This study analyzed data from the 3D measurement of the feet of 1,227 elementary school students aged 7-13 years residing in the capital region conducted as part of the 6th Anthropometry of Size Korea. In addition, 3D midsoles by sole type were designed utilizing a Rhino CAD, and midsole prototypes were output utilizing a Zortrax-M200 3D Printer. Through a cluster analysis of sole shapes by type, sole shapes were classified into three types. Type 1 has small values of foot lengths and foot breadths, with large toe 1 angles and high arch heights. Type 2 has intermediate values of foot lengths and foot breadths, with small toe 1 angles and high arch heights. Type 3 has large values of foot lengths and foot breadths with small toe 1 angles and low arch heights. On reviewing the results of design of 3D midsoles by sole type, it can be seen that the midsoles were designed according to characteristics by sole type. The results of the sole type analysis in the present study are expected to be meaningful as basic data for the development of shoe insoles for elementary school students.

• 소성∙가공
• /
• 제27권5호
• /
• pp.314-322
• /
• 2018

AlSi12 is a heat-resistant aluminum alloy that is lightweight, corrosion-resistant, machinable and attracting attention as a functional material in aerospace and automotive industries. For that reason, AlSi12 powder has been used for high performance parts through 3D printing technology. The purpose of this study is to observe deposition characteristics of AlSi12 powder in a direct energy deposition (DED) process (one of the metal 3D printing technologies). In this study, deposition characteristics were investigated according to various process parameters such as laser power, powder feed rate, scan speed, and slicing layer thickness. In the single track deposition experiment, an irregular bead shape and balling or humping of molten metal were formed below a laser power of 1,000 W, and the good-shaped bead was obtained at 1.0 g/min powder feed rate. Similar results were observed in multi-layer deposition. Observation of deposited height after multi-layer deposition revealed that over-deposition occurred at all conditions. To prevent over-deposition, slicing layer thickness was experimentally determined at given conditions. From these results, this study presented practical conditions for good surface quality and accurate geometry of deposits.

• 한국방사선학회논문지
• /
• 제13권7호
• /
• pp.1015-1024
• /
• 2019

최근 의료분야에서 X선은 질병의 진단 및 치료영역에서 필수적으로 요구되며, 영상의학 기술의 발전과 더불어 X선의 이용은 지속적으로 증가하는 추세지만, X선은 방사선 피폭의 단점을 가지고 있다. 방사선피폭을 방어하기 위해 임상에서는 납 방호도구를 사용하지만 납은 중금속으로 분류되어 납중독 등 인체에 유해한 반응을 일으킬 수 있다. 따라서 본 연구는 FDM(Fused Deposition Modeling)방식의 3차원 프린터의 재료를 이용하여 제작한 차폐체의 유용성을 알아보고자 한다. 필라멘트의 선감약계수를 확인하기 위해 PLA, XT-CF20, Wood, Glow, Brass를 이용해 팬텀을 제작 하고, CT scan을 하였다. 그리고 100 × 100 × 2 mm 크기의 차폐 시트를 모델링하고, 진단용 X선발생장치와 조사선량계를 이용하여 선량 및 차폐율을 측정하였으며, 납 방호도구와의 차폐율을 비교하였다. 실험결과 Brass의 CT number가 가장 높게 측정되어 Brass를 이용하여 차폐시트를 제작하였으며, 진단용 X선발생장치로 확인한 결과 100 kV, 40 mAs 조건으로 X선 조사 시 6 mm 두께의 차폐시트에서 차폐율이 90 % 이상으로 측정되어 apron 0.25 mmPb보다 차폐율이 높은 것을 확인하였다. 본 연구의 결과 3차원 프린팅 기술로 제작한 차폐체가 진단용 X선 영역에서 높은 차폐율을 보이는 것을 확인하였으며, 납 방호도구와의 비교를 통하여 납을 대체하여 방사선 방호도구로서의 가능성을 알 수 있었다.

• 한국광학회지
• /
• 제10권5호
• /
• pp.364-368
• /
• 1999

일반적으로 LSU(Laser Scanning Unit)는 LD모듈(Laser Diode, 콜리메이팅 렌즈, 슬릿), 실린더 렌즈 고속회전하는 PM(Polygon Mirror), f$\theta$렌즈와 같은 광부품들과 이들을 취부하는 Housing으로 구성되어져 있다. 먼저 본 논문에서는 당사에서 자체적으로 광설계된 LSU 시작품(시작(試作品)을 측정/평가하기 위해 평가항목들에 관해 살펴 보았다. 당사에서 시제작된 LSU의 특징은 LSU의 핵심부품인 f$\theta$렌즈가 2단가압형 저압사출방식으로 제작되었다는 것이다. LSU의 평가항목들은 BSH(Beam Scan Head)를 LMC(Linear Motion Controller)위에 장착해서 비교적 간단히 측정 할 수 있었고, 측정결과 600DPI(Dots Per Inch) 성능을 만족함을 확인할 수 있었다.

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.183-190
• /
• 2006

Digital 3D Real Object Duplication System (RODS) consists of 3D Scanner and Solid Freeform Fabrication System (SFFS). It is a device to make three-dimensional objects directly from the drawing or the scanning data. In this research, we developed an office type SFFS based on Three Dimensional Printing Process and an industrial SFFS using Dual Laser. An office type SFFS applied sliding mode control with sliding perturbation observer (SMCSPO) algorithm for control of this system. And we measured process variables about droplet diameter measurement and powder bed formation etc. through experiments. In case of industrial type SFFS, in order to develop more elaborate and speedy system for large objects than existing SLS process, this study applies a new Selective Dual-Laser Sintering (SDLS) process and 3-axis Dynamic Focusing Scanner for scanning large area instead of the existing f lens. In this process, the temperature has a great influence on sintering of the polymer. Also the laser parameters are considered like that laser beam power, scan speed, and scan spacing. Now, this study is in progress to evaluate the effect of experimental parameters on the sintering process.

• 대한치과기공학회지
• /
• 제43권3호
• /
• pp.84-92
• /
• 2021

Purpose: The purpose of this study was to compare the dimension safety evaluation between a general ultrasonic cleaner and an ultrasonic cleaner equipped with UV-C (ultraviolet-C). Methods: An edentulous model was prepared. A denture base and an occlusal rim were fabricated, and scanning was performed. After scanning, a denture base and full arch artificial teeth were designed. The full arch artificial teeth were printed using a three-dimensional printer (n=10). The residual resin was washed with alcohol and then scanned (reference data). The printed specimens were classified and cleaned using a general ultrasonic cleaner (GU group) and an ultrasonic cleaner equipped with UV-C (UC group). After each washing, a rescan was performed (scan data). Reference data and scan data were superimposed using overlapping software. Data were statistically analyzed using the Mann-Whitney test (α=0.05). Results: In the deviation values of full arch artificial teeth, the GU group showed a high deviation of 18.02 ㎛ and the UC group showed a low deviation of 15.02 ㎛. The two groups demonstrated a statistically significant difference (p<0.05). Conclusion: Full arch artificial teeth prepared using photopolymerized resin were deformed according to the temperature of water generated in the ultrasonic cleaner. It is judged that there is no deformation according to the UV-C ultrasonic cleaner.

• 대한치과기공학회지
• /
• 제43권4호
• /
• pp.153-159
• /
• 2021

Purpose: The purpose of this study was to assess the fitness of anterior and posterior interim crowns fabricated by three different additive manufacturing technologies. Methods: The working model was digitized, and single crowns (maxillary right central incisor and maxillary right first molar) were designed using computer-aided design software (DentalCad 2.2; exocad). On each abutment, interim crowns (n=60) were fabricated using three types of additive manufacturing technologies. Then, the abutment appearance and internal scan data of the interim crown was obtained using an intraoral scanner. The fitness of the interim crowns were evaluated by using the superimposition of the three-dimensional scan data (Geomagic Control X; 3D Systems). The one-way analysis of variance and Tukey posterior test were used to compare the results among groups (α=0.05). Results: A significant difference was found in the fitness of the interim crowns according to the type of additive manufacturing technology (p<0.05). The posterior interim crown showed smaller root mean square value than the anterior interim crown. Conclusion: Since the fitness of the posterior interim crown produced by three types of additive manufacturing technology were all within clinically acceptable range (<120 ㎛), it can be sufficiently used for the fabrication of interim crowns.

• 대한핵의학회지
• /
• 제3권2호
• /
• pp.55-63
• /
• 1969

In the past few years, scintigraphy has become increasingly important in clinical practice, and the use of a color-printing technique has permited a more accurate interpretation of the scan image. Our liver color scintigrams consist of 51 hepatomas, 35 liver cirrhosis, 22 liver abscessis, 10 hepatitis and other 13 cases of the liver diseases which were clinically arid pathologically diagnosed at Sevarance Hospital, Yonsei Univ., since Feb. 1969 through Sept. 1969. These scintigrams have been analized in terms of various pathologic morphology, such as size, shape, margin of the liver, distribution of radioactivity, and shape of the space occupying lesions. The results are as follows: 1. Enlargement of the liver was the most common finding in the diseased livers. The Rt. lobe enlargement was particularly prominent in the liver abscess. 2. Irregular distribution of radioactivity in the liver (so called mottling) was present in 78% of hepatoma, while it was seen only in 31% of liver abscesses. 3. Liver cirrhosis tends to show perihilar accumulation of the isotope (57%). 4. The deformity of the lower most angle of the Rt. lobe, and the Lt. lateral margin of the Lt. lobe was also impressive throughout the cases ($74{\sim}95%$ of all diseased livers). 5. The frequency of visualization of the spleen was influenced by the size of space occupying lesions and the amount of functioning liver. 6. Differentiation between the liver abscess and hepatoma seems to be possible on scintigram, when shape and margin of defect and patterns of distribution of radioactivity in the remaining liver are clearly demonstrated.

• 구강회복응용과학지
• /
• 제36권3호
• /
• pp.196-202
• /
• 2020

최근 three-dimensional (3D) printed denture가 완전 무치악 환자의 보철치료 시 선택할 수 있는 하나의 제작 방법으로 주목을 받고 있다. 그러나 아직까지 건강보험 총의치가 3D 프린팅 활용을 지원하지 않기 때문에 전통적인 방식만을 사용해야만 하며, 재제작이 필요할 경우 처음부터 제작과정을 반복해야 한다는 단점이 있다. 그러나 통상적인 의치 제작 과정 중 특정 단계들의 정보를 디지털 스캔하여 저장할 수 있고, 본 증례에서는 이 정보를 활용하여 통상적인 방식으로 제작된 첫번째 의치의 문제점을 보완한 새로운 의치를 3D 프린팅으로 완성하였다.