• 치위생과학회지
• /
• 제23권3호
• /
• pp.225-235
• /
• 2023

Background: This study aimed to analyze the effects of periodontal treatment and individual- and tooth-related factors on tooth extraction in people with disabilities. Methods: The Korea National Health Insurance claims data of individuals with disabilities aged 40~64 years with chronic periodontitis in 2008 were obtained. Of these, data on the disabled who underwent scaling/root plaining, subgingival curettage/periodontal surgery, or non-periodontal treatments, and data on their teeth were selected. The extraction of 716,688 teeth from 39,097 patients was tracked until 2018, and the patient- and tooth-level factors related to tooth loss were identified using a mixed-effect logistic regression analysis. Results: Data from approximately 17% of the teeth were extracted during a follow-up period of approximately 11 years. Among the tooth-level variables, scaling/root planing treatment at baseline and periodontal treatment during the follow-up period were associated with a lower risk of tooth loss (odds ratio=0.692 and 0.769, respectively, p<0.001). Non-vital teeth increased the risk of tooth loss by 3.159 times (p<0.001). Among the patient-level variables, females were less likely to have lost their teeth than males, and those with orthopedic impairment or brain lesions/mental disabilities, a higher age group, lower income level, or residents in medium/small cities or rural areas were more likely to have lost their teeth (p<0.001). Conclusion: Through approximately 11 years of follow-up, scaling or root planing, experience with periodontal treatment at least once, female sex, older age, lower income, smaller residential areas, type of disability, and pulp vitality were found to be associated with tooth loss in individuals with disabilities aged 40~64 years with chronic periodontitis. To prevent tooth loss in individuals with disabilities, it is necessary to establish a dental treatment plan that considers the timing of periodontal treatment and the characteristics of the patient and teeth.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.897-899
• /
• 1999

This paper presents a scaling factor tuning method to improve the performance of fuzzy logic controller. Tuning rules and reasoning are utilized off-line to determine the scaling factors based on absolute value of the error and its difference. In this paper We proposed a new method to generate fuzzy logic controllers throught genetic algorithm. The developed approach is subsequently applied to the design of proportional plus integral type fuzzy controller for a dc-servo motor control system. The performance of this control system is demonstrated higher than a conventional fuzzy logic controller(FLC).

• 전기학회논문지
• /
• 제57권9호
• /
• pp.1618-1623
• /
• 2008

In this paper, a new design method for IMC-PID that adds a phase scaling factor of system identifications to the standard IMC-PID controller as a control parameter is proposed. Based on analytically derived frequency properties such as gain and phase margins, this tuning rule is an optimal control method determining the optimum values of controlling factors to minimize the cost function, integral error criterion of the step response in time domain, in the constraints of design parameters to guarantee qualified frequency design specifications. The proposed controller improves existing single-parameter design methods of IMC-PID in the inflexibility problem to be able to consider various design specifications. Its effectiveness is examined by a simulation example, where a comparison of the performances obtained with the proposed tuning rule and with other common tuning rules is shown.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.404-406
• /
• 1998

In this paper, we propose a scaling factor tuning method to improve the performance of fuzzy controller. Tuning rules and reasoning are utilized on-line to determine the scaling factors based on absolute value of the error and its difference. A adaptive evolutionary computation (AEC) is used to search for the optimal tuning rules that will maximize the fitness function. Finally, the proposed fuzzy controller is applied to the angular stabilization of an inverted pendulum.

• 한국융합학회논문지
• /
• 제5권3호
• /
• pp.45-51
• /
• 2014

Computer science and computing technologies are applied into mathematical, science, medical, engineering and educational applications. The models are used to solve the issues in all the domains. Educational systems are used top down, bottom up, Gap Analysis model in the educational learning system. Educational learning process integrated with Lerner, content and the methodology. The Learners and content are same in the educational system or similar courses but the teaching methodologies are differing one with another. The determinations of teaching methodologies are based on the factors related to that particular model or subject. The learning model influencing determinations are made by the surveys, analysis and observation of data to maximize the learning outcome. This paper attempted to evaluate the SNE learners cognitive using NASA Scaling.

• Journal of Information Processing Systems
• /
• 제7권1호
• /
• pp.93-102
• /
• 2011

In deeply scaled CMOS technologies, two major non-ideal factors are threatening the survival of the CMOS; i) PVT (process, voltage, and temperature) variations and ii) leakage power consumption. In this paper, we propose a novel post-silicon tuning methodology to scale optimum voltage and frequency "dynamically". The proposed design technique will use our PVT sensor circuits to monitor the variations and based on the monitored variation data, voltage and frequency will be compensated "automatically". During the compensation process, supply voltage is dynamically adjusted to guarantee the minimum total power consumption without violating the frequency requirement. The simulation results show that the proposed technique can reduce the total power by 85% and the static power by 53% on average for the selected ISCAS'85 benchmark circuits with 45 nm CMOS technology compared to the results of the traditional PVT compensation method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권1호
• /
• pp.109-115
• /
• 2010

본 논문은 퍼지 제어를 통한 이동용 로봇에 대한 추적 제어에 대해서 다루고 있다. 이동용 로봇은 Mamdani 형식의 퍼지 제어기로 제어 된다. 퍼지 제어기에 있어서 이동용 로봇과 목표 사이의 각도와 각도의 변화율이 입력으로 사용되고, 출력으로 조향각이 추론되어 제어입력이 된다. 퍼지 규칙은 전문가의 경험적 지식을 참조하여 7개를 사용하였다. 또한 퍼지 제어기 설계에 있어서 하나의 관심 분야인 환산계수(scaling factor) 조정 방법에 대해 제안한다. 본 논문에서는 이를 위해 파라미터 최적화 분야에서 잘 알려진 실수코딩 유전알고리즘을 적용하였다. 시뮬레이션을 통해 다양한 초기 조향각이 주어진 경우, 목표치에 대한 추적 안정성을 보여 퍼지 제어기의 유효성이 확인된다.

• 한국정보통신학회논문지
• /
• 제16권9호
• /
• pp.2015-2020
• /
• 2012

본 연구에서는 이중게이트(Double Gate; DG) MOSFET에 스켈링이론을 적용할 때 두 개의 게이트에 의한 효과를 반영하기 위하여 스켈링인자에 가중치를 적용하여 문턱전압이하 특성을 해석하였다. 포아송방정식에 의한 전위분포를 구하기 위하여 전하분포는 가우스분포함수를 이용할 것이며 이의 타당성은 이미 여러 논문에서 입증하였다. 이 전위분포를 이용하여 단채널효과 중 문턱전압이동, 문턱전압이하 스윙, 드레인유도장벽감소 등을 스켈링인자에 대한 가중치의 변화에 따라 관찰하였다. 이중게이트 MOSFET의 구조적 특성상 채널길이에 대한 가중치는 0.1에서 1까지 사용하였으며 채널두께에 대한 가중치는 1에서 2까지 가중치를 사용하였다. 결과적으로 문턱전압 이하 스윙은 스켈링인자에 따라 거의 변화가 없었으나 가중치에 따라 변화하였으며 문턱전압이동 및 드레인유도 장벽감소 등은 스켈링인자에 따라 그리고 가중치에 따라 큰 변화를 보이는 것을 알 수 있었다.

• 대한치과의사협회지
• /
• 제41권1호통권404호
• /
• pp.42-47
• /
• 2003

Dental professions recommend that mandibular impacted third molar be extracted for the prevention of osteomyelities crneoplasm or for the treatment of halitosis. Even the possibility of emergence of unexpected halitosis after the preventive extraction exists, there are few studies describing the unexpected halitosis. This study intended to measure the emergence of halitosis after extraction of mandibular impacted third molar. Thirty-eight patients who visited Daejin Medical Center participated in this study. Halitosis was objectively measured using Halimeter in 3 intervals-before, after I day, after 7 days. Third factors, scaling and gender, which may influence the halitosis were analyzed with stratification. This study finds that in general halitosis decreased after 1 day but increased after 7 days. Scaling was helpful in decreasing halitosis and women have less severe halitosis than men. The effects of time interval(p<0.05), gender(p=0.836), and scaling(p=0.7929) on the severity of halitosis were not statistically significant. However, since this study's patients are neither a representative sample nor a random sample, all data interpretation was focused on clinical significance instead of conventional statistical significance. Clinical significance of this study's findings are: 1) scaling should be conducted in advance, 2) men should be notified of the higher possibility of halitosis.

• Computers and Concrete
• /
• 제21권4호
• /
• pp.385-397
• /
• 2018

This study is focused on the investigation for similitude the requirements between prototype and scaled models to determine the structural behavior of concrete load bearing systems. The scaling concept has been utilized in many engineering branches, has been assisted to engineers and scientists for obtain the behavior of the prototype by using scaled model. The scaling can be done for two purposes, either scaling up or scaling down depending upon the application. Because, scaled down models are the experimentation on scaled models is cheaper than huge structures. These models also provide facilities for experimental work. Similarity relationships between systems are created either by field equations of the system or by dimensional analysis. Within this study, similarity relationships were obtained by both methods. The similarity relations obtained are applied to different load bearing systems and it is determined that the similarity relation is a general expression. In this study, as an example, column, frame, cantilever beam and simple beam are chosen and 1/2, 1/5 and 1/10 scales are applied. The results are compared with the analytical results which are obtained by creating of the finite element models with SAP2000 software of different scaled load bearing systems. The analysis results of all systems are examined and it is determined that the scale factors are constant depending on the scale types for different load bearing systems.