• Earthquakes and Structures
• /
• v.11 no.3
• /
• pp.505-516
• /
• 2016

This paper evaluates the scaling of ground motions recorded from nine intermediate-depth earthquakes produced in the Vrancea seismic zone in Romania. The considered ground motion database consists of 363 horizontal recordings obtained on soil classes B and C (according to Eurocode 8). An analysis of the inter- and intra-event spectral accelerations is performed in order to gain information regarding the magnitude and distance scaling of the Vrancea ground motions. The analyses reveal a significant influence of the earthquake magnitude and focal depth on the distance scaling and different magnitude and distance scaling for the two soil classes. A linear magnitude and distance scaling is inferred from the results for the range of magnitudes $5.2{\leq}M_W{\leq}7.1$. The results obtained are checked through stochastic simulations and the influence of the stress drop and kappa values on the ground motion levels is assessed. In addition, five ground motion models which were tested in other studies using recordings from Vrancea earthquakes are analyzed in order to evaluate their corresponding host stress drop and kappa. The results show generally a direct connection between the host kappa values and the host stress drop values. Moreover, all the ground motion models depict magnitude dependent host kappa and stress drop levels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1C
• /
• pp.20-25
• /
• 2006

In this paper, the performance of Tree-LDPC code is presented based on the min-sum algorithm with scaling and the asymptotic performance in the water fall region is shown by density evolution. We presents that the Tree-LDPC code show a significant performance gain by scaling with the optimal scaling factor which is obtained by density evolution methods. We also show that the performance of min-sum with scaling is as good as the performance of sum-product while the decoding complexity of min-sum algorithm is much lower than that of sum-product algorithm. The Tree-LDPC decoder is implemented on a FPGA chip with a small interleaver size.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.140-143
• /
• 2003

Air permeabilities in unsaturated fractured tuff at the Apache Leap Research Site (ALRS) near Superior, Arizona, exhibit a self-affine behavior, thus renders a field random fractal. Based up fractal scaling, the observed scale effect has been interpreted [Hyun et al., 2002]. Recently, Frantziskonis and Hansen [2000] presented that fractal scaling can be represented based on wavelets. This study deals with the way of using wavelets for fractal scaling. A numerical study is presented to examine the applicability of wavelet-based approach to determining upscaled air permeability values on various data supports at the site. To characterize the scaling property of self-affine fields generated based upon wavelets, Hurst coefficient, H. was inferred by applying the average wavelet coefficient (AWC) method. The result yielded H = 0.24, which is very close to the result of geostatistical analysis using a power variogram (H = 0.22). The study concludes that wavelet-based scaling is a useful way of determining parameter values on different data supports, which is an essential task for modeling of subsurface flow and mass transport in a numeric grid with different resolutions (grid size).

• Journal of Astronomy and Space Sciences
• /
• v.28 no.3
• /
• pp.183-192
• /
• 2011

The current study analyzes the effects of the scaling parameters of the batch unscented transformation on precision satellite orbit determination. Satellite laser ranging (SLR) data are used in the orbit determination algorithm, which consists of dynamics model, observation model and filtering algorithm composed of the batch unscented transformation. TOPEX/Poseidon SLR data are used by utilizing the normal point (NP) data observed from ground station. The filtering algorithm includes a repeated series of processes to determine the appropriate scaling parameters for the batch unscented transformation. To determine appropriate scaling parameters, general ranges of the scaling parameters of ${\alpha}$, ${\beta}$, k, $\lambda$ are established. Depending on the range settings, each parameter was assigned to the filtering algorithm at regular intervals. Appropriate scaling parameters are determined for observation data obtained from several observatories, by analyzing the relationship between tuning properties of the scaling parameters and estimated orbit precision. The orbit determination of satellite using the batch unscented transformation can achieve levels of accuracy within several tens of cm with the appropriate scaling parameters. The analyses in the present study give insights into the roles of scaling parameters in the batch unscented transformation method.

• Journal of Korean society of Dental Hygiene
• /
• v.19 no.5
• /
• pp.765-776
• /
• 2019

Objectives: The purpose of this study was to compare the oral health statuses pre- and post-insurance using the $5^{th}$ and $6^{th}$ National Health and Nutrition Examination Survey data to confirm the effect of scaling insurance after a year. Methods: Data were analyzed using IBM SPSS ver. 21.0 (IBM Co., Armonk, NY, USA). The four years were integrated, and a composite sample analysis was performed. A total of 26,990 people were included in the study before applying for scaling insurance (14,343 persons) or after receiving scaling insurance (12,647 persons). A chi-squared test was performed to compare the demographic characteristics and oral health status of the subjects. The significance level of the statistical test was 0.05. Results: The proportion of patients without implants was high before the provision of scaling insurance once a year, however, the proportion of patients with one or more implants was high (p<0.05) after the provision of scaling insurance once a year. Hemorrhagic periodontal tissues and tartar formation in periodontal tissues were highly prevalent before the provision of scaling insurance once a year, however, healthy periodontal tissues and formation of periodontal pockets were highly prevalent (p<0.05) after the provision of scaling insurance once a year. The decay, missing, and filled teeth index scores were higher before the provision of scaling insurance once a year (p<0.05). Conclusions: The aforementioned results showed that scaling once a year helps prevent or treat periodontal disease. In addition, we confirmed the effect of prevention on periodontal disease and dental caries, therefore, we expect it to develop into a stable policy.

• Nuclear Engineering and Technology
• /
• v.53 no.3
• /
• pp.793-803
• /
• 2021

The small PWR has been paid more and more attention due to its diversity of application and flexibility in the site selection. However, the large core power density, the small containment space and the rapid accident progress characteristics make it difficult to control the containment pressure like the traditional PWR during the LOCA. The pressure suppression system has been used by the BWR since the early design, which is a suitable technique that can be applied to the small PWR. Since the configuration and operating conditions are different from the BWR, the pressure suppression system should be redesigned for the small PWR. Conducting the experiments on the scale down test facility is a good choice to reproduce the prototypical phenomena in the test facility, which is both economical and reasonable. A systematic scaling method referring to the H2TS method was proposed to determine the geometrical and thermohydraulic parameters of the pressure suppression containment response test facility for the small PWR conceptual design. The containment and the pressure suppression system related thermohydraulic phenomena were analyzed with top-down and bottom-up scaling methods. A set of the scaling criteria were obtained, through which the main parameters of the test facility can be determined.

• Journal of The Korean Astronomical Society
• /
• v.36 no.spc1
• /
• pp.1-5
• /
• 2003

In an early paper Skumanich suggested the existence of a scaling law relating the mean sunspot magnetic field with the square-root of the photospheric pressure. This was derived from an analysis of a variety of theoretical spot models including those by Yun (1968). These were based on the Schliiter-Temesvary (S- T) similarity assumption. To answer criticisms that such modeling may have unphysical (non-axial maxima) solutions, the S-T model was revisited, Moon et al. (1998), with an improved vector potential function. We consider here the consequences of this work for the scaling relation. We show that by dimensionalizing the lateral force balance equation for the S- T model one finds that a single parameter enters as a characteristic value of the solution. This parameter yields Skumanich's scaling directly. Using an observed universal flux-radius relation for dark solar magnetic features (spots and pores) for comparison, we find good to fair agreement with Yun's characteristic value, however the Moon et al. values deviate significantly.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.5
• /
• pp.669-676
• /
• 2016

Objectives: The purpose of the study was to investigate the related factors of scaling experience of multi-cultural adolescents in Korea. Methods: The subjects were 698 multi-cultural adolescents from web-based survey of the 11th(2015) Korean Youth Risk Behavior. Multi-cultural adolescents are defined as the children of marriage migrant women. The study instruments included demographical characteristics of the subjects, oral health behaviors, daily tooth brushing times, health behaviors, and experience of smoking and alcohol consumption. Data were analyzed using PASW statistics 18.0. Results: The experience rate of scaling was 18.8%. Multiple logistic regression analysis revealed that experience of scaling were related with experiences of sealant and fruit consumption. Conclusions: It is very important to provide the continuing oral health prevention program for the adolescents and investigate the cost-benefit effectiveness of oral health care program.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.18 no.2
• /
• pp.97-103
• /
• 2018

Background: Respiration monitoring is necessary during sedation for dental treatment. Recently, acoustic respiration rate ($RRa^{TM}$), an acoustics-based respiration monitoring method, has been used in addition to auscultation or capnography. The accuracy of this method may be compromised in an environment with excessive noise. This study evaluated whether noise from the ultrasonic scaler affects the performance of RRa in respiratory rate measurement. Methods: We analyzed data from 49 volunteers who underwent scaling under intravenous sedation. Clinical tests were divided into preparation, sedation, and scaling periods; respiratory rate was measured at 2-s intervals for 3 min in each period. Missing values ratios of the RRa during each period were measuerd; correlation analysis and Bland-Altman analysis were performed on respiratory rates measured by RRa and capnogram. Results: Respective missing values ratio from RRa were 5.62%, 8.03%, and 23.95% in the preparation, sedation, and scaling periods, indicating an increased missing values ratio in the scaling period (P < 0.001). Correlation coefficients of the respiratory rate, measured with two different methods, were 0.692, 0.677, and 0.562 in each respective period. Mean capnography-RRa biases in Bland-Altman analyses were -0.03, -0.27, and -0.61 in each respective period (P < 0.001); limits of agreement were -4.84-4.45, -4.89-4.15, and -6.18-4.95 (P < 0.001). Conclusions: The probability of missing respiratory rate values was higher during scaling when RRa was used for measurement. Therefore, the use of RRa alone for respiration monitoring during ultrasonic scaling may not be safe.

• Journal of the Korea Convergence Society
• /
• v.5 no.3
• /
• pp.45-51
• /
• 2014

Computer science and computing technologies are applied into mathematical, science, medical, engineering and educational applications. The models are used to solve the issues in all the domains. Educational systems are used top down, bottom up, Gap Analysis model in the educational learning system. Educational learning process integrated with Lerner, content and the methodology. The Learners and content are same in the educational system or similar courses but the teaching methodologies are differing one with another. The determinations of teaching methodologies are based on the factors related to that particular model or subject. The learning model influencing determinations are made by the surveys, analysis and observation of data to maximize the learning outcome. This paper attempted to evaluate the SNE learners cognitive using NASA Scaling.