• 한국군사과학기술학회지
• /
• 제14권5호
• /
• pp.842-849
• /
• 2011

The transponder simulator designed to simulate the transponder of military satellite communication systems in the geostationary orbit is required to have time delay function, because of 250 ms delay time, when a radio wave transmits the distance of 36,000 km in free space. But, it is very difficult to develop 250 ms time delay device in the transponder simulator of 100 MHz bandwidth, due to unstable operation of FPGA, loss of memory data for the high speed rate signal processing. Up to date, bandwidth of the time delay device is limited to 45 MHz bandwidth. To solve this problem, we propose the new time delay techniques up to 100 MHz bandwidth without data loss. Proposed techniques are the low speed down scaling and high speed up scaling methods to read and write the external memory, and the matrix structure design of FPGA memory to treat data as high speed rate. We developed the satellite link simulator in 100 MHz bandwidth using the proposed new time delay techniques, implemented to the transponder simulator and verified the function of 265 ms time delay device in 100 MHz bandwidth.

• 한국음향학회지
• /
• 제19권8호
• /
• pp.12-21
• /
• 2000

본 논문에서는 심리음향 (psychoacoustics)을 이용한 다채널 동적 음향 압축 알고리즘을 통해 감음신경성 난청 (sensorinural hearing loss)을 보정하여 정상적인 지각 환경을 제공하는 알고리즘을 제안한다. 제안된 알고리즘은 라우드니스 조정 함수 (loudness scaling function)를 통해 난청자에게 적합한 라우드니스 레벨을 보상 시켜 주고, 난청자가 인식하게 되는 신호에 대한 마스킹 특성을 해석하여, 지각 영역 (perceptual domain)에서 각각의 주파수 성분에 대한 음압 레벨과 마스킹 임계치 (masking threshold) 사이의 거리로 정의되어지는 SMR(signal-to-masking ratio)을 통해 주파수 대비 (spectral contrast)를 복원 시켜 줌으로써 정상적인 지각 환경을 제공하는 것이다.

• 산업기술연구
• /
• 제20권B호
• /
• pp.155-162
• /
• 2000

Although Fuzzy Logic Controller(FLC) adopted three terms as input gives better performance, FLC is in general composed of two-term control because of the difficulty in the construction of fuzzy rule base. In this paper, a three-term FLC which is similar to PID control but acts as a nonlinear controller is proposed. To reduce the complexity of the rule base design and to increase efficiency. a simplified fuzzy PID control is induced from a hybrid velocity/position type PID algorithm by sharing a common rule base for both fuzzy PI and fuzzy PD parts. It is simple in structure, easy in implementation, and fast in calculation. The phase plane technique is applied to obtain the rule base for fuzzy two-term control and the resultant rule base is Macvicar-Whelan type. And the membership function is a Gaussian function. The frequency response information is used in tuning of the membership functions. Also a tuning strategy for the scaling factors is proposed based on the relationship between PID gain and the scaling factors. Simulation results show better performance and the effectiveness of the proposed method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권1호
• /
• pp.452-472
• /
• 2019

Most existing wavelet-based multiplicative watermarking methods are affected by geometric attacks to a certain extent. A serious limitation of wavelet-based multiplicative watermarking is its sensitivity to rotation, scaling, and translation. In this study, we propose an image watermarking method by using dual-tree complex wavelet transform with a multi-objective optimization approach. We embed the watermark information into an image region with a high entropy value via a multiplicative strategy. The major contribution of this work is that the trade-off between imperceptibility and robustness is simply solved by using the multi-objective optimization approach, which applies the watermark error probability and an image quality metric to establish a multi-objective optimization function. In this manner, the optimal embedding factor obtained by solving the multi-objective function effectively controls watermark strength. For watermark decoding, we adopt a maximum likelihood decision criterion. Finally, we evaluate the performance of the proposed method by conducting simulations on benchmark test images. Experiment results demonstrate the imperceptibility of the proposed method and its robustness against various attacks, including additive white Gaussian noise, JPEG compression, scaling, rotation, and combined attacks.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.240.2-240.2
• /
• 2013

The device scale of flash memory was confronted with quantum mechanical limitation. The next generation memory device will be required a break-through for the device scaling problem. Especially, graphene is one of important materials to overcome scaling and operation problem for the memory device, because ofthe high carrier mobility, the mechanicalflexibility, the one atomic layer thick and versatile chemistry. We demonstrate the hybrid memory consisted with the metal-oxide quantum dots and the mono-layered graphene which was transferred to $SiO_2$ (5 nm)/Si substrate. The 5-nm thick secondary $SiO_2$ layer was deposited on the mono-layered graphene by using ultra-high vacuum sputtering system which base pressure is about $1{\times}10^{-10}$ Torr. The $In_2O_3$ quantum dots were distributed on the secondary $SiO_2$2 layer after chemical reaction between deposited In layer and polyamic acid layer through soft baking at $125^{\circ}C$ for 30 min and curing process at $400^{\circ}C$ for 1 hr by using the furnace in $N_2$ ambient. The memory devices with the $In_2O_3$ quantum dots on graphene monolayer between $SiO_2$ thin films have demonstrated and evaluated for the application of next generation nonvolatile memory device. We will discuss the electrical properties to understating memory effect related with quantum mechanical transport between the $In_2O_3$ quantum dots and the Fermi level of graphene layer.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.486-490
• /
• 2002

When the fuzzy controller apply to a real plant, We have not excepted result of a satisfactory control by modeling error and lacking information about an plant. In this case, we have to adjust the scale factors for improvement of the control performance and this method need a lot of time and cost for perform a trial and error. In this paper, we proposed the fuzzy controller with the automatic adjustment of scaling factors. It was improve upon the control performance using a adequate scale factor by fuzzy logic and normalizer. As the results of simulation through the second order plant, we confirmed that the proposed the fuzzy controller within the function of automatic scale get a good response compare with the fuzzy controller within the fixed scale factor.

• 한국실내디자인학회논문집
• /
• 제1호
• /
• pp.52-55
• /
• 1992

The purpose of this study was to suggest the spatial structure among residential behaviors in relation to work space. To find the structure, Multi-Dimensional Scaling analysis was used. Respondents were 349 middle income housewives living in apartments in the area of Caopital region. Data were collected through the questinnaire survey. For the future residential interior design, following points were sugtested. A laundary space neess to be developed independently , being separated from both bathroom and kitchen/dining space. A new area which will give housewives some territoriality and also function as home office needs to be considered. A space configuration which satisfies the organic relationships among laundary behaviors such as washing dying, ironing and folding , needs to be systematically planned, with two adjoining separate zones of wet and dry utility . The present bathroom nees to be more incorporated to the private bedroom rather than to workspace.

• 한국경영과학회지
• /
• 제28권4호
• /
• pp.191-198
• /
• 2003

The generalized knapsack problem or gknap is the combinatorial optimization problem of optimizing a nonnegative linear function over the integral hull of the intersection of a polynomially separable 0-1 polytope and a knapsack constraint. The knapsack, the restricted shortest path, and the constrained spanning tree problem are a partial list of gknap. More interesting1y, all the problem that are known to have a fully polynomial approximation scheme, or FPTAS are gknap. We establish some necessary and sufficient conditions for a gknap to admit an FPTAS. To do so, we recapture the standard scaling and approximate binary search techniques in the framework of gknap. This also enables us to find a weaker sufficient condition than the strong NP-hardness that a gknap does not have an FPTAS. Finally, we apply the conditions to explore the fully polynomial approximability of the constrained spanning problem whose fully polynomial approximability is still open.

• 한국주거학회논문집
• /
• 제1권2호
• /
• pp.1-11
• /
• 1990

A study of domestic furniture arrangements may reveal the living style relevant to the room as conceived and coded by occupants and the effects of the physical environment on the structure of behavior settings. The purpose of this study was to investigate, through analizing the furniture usage and behavior as a non-reactive and activity oriented behavioral measures, the occupants` domestic habits as a living style using MDS. MDS(multidimensional scaling technique) is a statistical technique for creating a spatial representation of data. It Is a particularly appropriate technique for analizing qualitative data such as the furniture usage and behavior because it takes into account all of the relationships between items. For the MDS analysis, the furniture usage and behavior examined by housing types based on 114 households in Seoul. The result of spatial configuration by MDS has three dimensions : recogn;lion of room function, pattern of room organization, understanding of room meaning. The effect of housing types for dimensions is identical but configuration of furniture items is different.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2007년도 가을 학술발표논문집 Vol.34 No.2 (C)
• /
• pp.433-438
• /
• 2007

This paper presents a distance mapping-based localization method with incomplete data which means partially observed data. We make three contributions. First, we propose the use of Multi Dimensional Scaling (MDS) for multi-robot localization. Second, we formulate the problem to accomodate partial observations common in multi-robot settings. We solve the resulting optimization problem using #Scaling by Majorizing a Complicated function (SMACOF)#, a popular algorithm fur iterative MDS. Third, we not only verify the performance of MDS-based multi-robot localization by computer simulations, but also implement a real world localization of multi-robot team. Using extensive empirical results, we show that the accuracy of the proposed method is almost similar to that of Monte Carlo Localization(MCL).