• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.494-497
• /
• 2002

본 논문에서는 halo doping profile을 갖는 나노구조 LDD MOSFET의 문턱전압에 대한 시뮬레이션 결과를 나타내었다. 소자 크기는 generalized scaling을 사용하여 100nm에서 40nm까지 스케일링하였다. Van Dort Quantum Correction Model(QM)을 사용하여 정전계 스케일링과 정전압 스케일링에 대한 문턱 전압과 각각의 게이트 oxide 두께에 대한 direct tunneling 전류를 조사하였다. 게이트 길이가 감소할 때 정전계 스케일링에서는 문턱전압이 감소하고, 정전압 스케일링에서는 문턱전압이 증가하는 것을 알 수 있었고, 게이트 oxide두께가 감소할 때 direct tunneling 전류는 증가함을 알 수 있었다. 감소하는 채널 길이를 갖는 MOSFET 문턱전압에 대한 roll-off 특성을 최소화하기 위해 generalized scaling에서 $\alpha$값은 1에 가깝게 되는 것을 볼 수 있었다.

• Journal of Power Electronics
• /
• 제17권3호
• /
• pp.756-765
• /
• 2017

The control of the power conversion system (PCS) in a battery energy storage system has a challenge due to the existence of grid impedance. This paper studies an impedance model of an LCL-based PCS in the d-q domain. The feature of a PCS connected to a weak grid is unveiled by use of an impedance model and a generalized Nyquist criterion. It is shown that the interaction between grid impedance and the PCS destabilizes the cascaded system in certain cases. Therefore, this paper proposes a novel control method that adopts virtual resistors to overcome this issue. The improvement in the control loop leads the PCS to a more stable condition than the conventional method. Impedance measurement is implemented to verify the correctness of the theoretical analysis. Experimental results obtained from a down-scaled prototype indicate that the proposed control method can improve the performance of the PCS under a weak grid.

• 한국철도학회논문집
• /
• 제19권5호
• /
• pp.629-637
• /
• 2016

본 논문에서는 선로와 근접하여 설치하는 근접 방음벽에 관한 음향성능평가와 근접 방음벽의 삽입손실 예측을 위해 경계요소법 대신에 비교적 용이하게 사용 가능한 근사식의 제안에 관한 연구를 수행하였다. 우선, 근접 방음벽을 축척 모형으로 제작하여 무향실에서 음향성능평가를 수행하였으며, 스피커 음원 위치에 따른 총합 삽입손실을 등고선 형태로 분석하였다. 그리고, 무향실에서 수행한 축척 모형 근접 방음벽에 대한 삽입손실 측정결과를 이용하여 다양한 형상의 근접 방음벽에 대한 삽입손실 예측을 위한 근사식을 제안하였다. 또한, 무향실에서의 측정결과 및 예측결과와의 상호 비교를 통해 예측 프로그램의 타당성을 검증하였다. 마지막으로, 열차 소음원의 주파수 특성을 고려하고 높이가 1.0m, 상부 방음판의 크기가 0.5m이며 'ㄱ'자 형상을 갖는 흡음형 근접 방음벽을 철도의 건축한계선에 설치하는 경우에 대한 삽입손실 예측 및 음향성능 평가를 수행하였으며, 삽입손실 예측을 위한 근사식을 제안하였다.

• Geomechanics and Engineering
• /
• 제11권2호
• /
• pp.177-195
• /
• 2016

To secure the stability of geotechnical infrastructures and minimize failures during the construction process, a number of support systems have been introduced in the last several decades. In particular, stabilization methods using steel bars have been widely used in the field of geotechnical engineering. Rock bolt system is representative support system using steel bars. Pre-stressing has been applied to enhance reinforcement performance but can be released because of the failure of head or anchor sections. To overcome this deficiency, this paper proposes an innovative support system that can actively reinforce the weak ground along the whole structural element by introducing an active tension bolt containing a spring unit to the middle of the steel bar to increase its reinforcement capacity. In addition, the paper presents the support mechanism of the active tension bolt based on a theoretical study and employs an experimental study to validate the performance of the proposed active tension bolt based on a down-scaled model. To examine the feasibility of the active tension unit in a pillar, the paper considers a pullout test and a small-scale experimental model. The experimental results suggest the active tension bolt to be an effective support system for pillar reinforcement.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.281-284
• /
• 2009

로켓엔진 연소기의 연소 불안정 억제를 위해 연소 상황에서의 1/4파장 공명기의 주파수 동조를 수치적으로 연구하였다. 상온 음향 시험을 통해 도출된 최적 감쇠 조건을 충족시키는 사양의 1/4파장 공명기를 채택하였다. 먼저, 실규모 연소실의 조건을 모사한 모형 연소실에서의 연소장을 수치해석하여 기본 음향파 응답 특성을 분석하였다. 다음으로, 이 연소실에 음향 공명기를 장착하여 공명기 내부 물성치를 예측하였다. 이러한 기본 데이터를 토대로 특정 음향 모드를 감쇠시킬 수 있는 주파수 동조 방안을 연구하였다. 각 공명기 내부의 물성치를 토대로 공명기를 개별 공명기의 최적 동조 길이로 설계할 경우에 충분한 감쇠 성능을 얻을 수 있었다. 설계의 편의를 위해 모든 공명기를 동일길이로 설정한 경우, 길이에 따른 감쇠성능을 비교하여 제시하였다. 이를 토대로 최적의 동조길이를 찾을 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.895-902
• /
• 2010

The method in a bid to make better use of limited urban space amidst increasingly expanding urban area have been attempted in various ways. Efficient using underground space is one of the examples. The pipe roof and excavation for underground crossing implemented in this study was the part of evaluation of such attempt. However, the pipe roof method for underground crossing may cause the ground surface to be uplifted or settled down, having effect on structure above the ground. Thus in this study, a laboratory model test designed to evaluate the effect on surface during implementing pipe roof and excavation was carried out. The ground displacement during pipe roof advancing and excavation is usually occurred in a radial shape but as the study focused on trackbed, the evaluation included ground settlement only. Thus, appropriately-scaled model was selected considering domestic geological characteristics and operation characteristics of traditional and high-speed rail trains and the qualitative evaluation of displacement was carried out with a certain ground loss depending on excavation after categorizing trackbed settlement pattern depending on depth of top soil.

• 한국전자파학회논문지
• /
• 제27권2호
• /
• pp.131-137
• /
• 2016

본 논문에서는 지하에 매설된 관 주변에 발생한 지하 공동의 탐지를 위해 지하 탐사 레이다의 가능성을 모의실험으로 조사하였다. 실험 장치는 임펄스형 지하 탐사 레이다 시스템, xy 직교 좌표 로봇, 지하 매질을 채운 탱크, 금속관, 모의실험용 공동 모델로 구현하였다. 특히, 모의실험용 공동 모델은 공기로 채워진 지하 공동의 전기적 특성과 유사하면서 견고한 형상을 유지할 수 있는 스티로폼 ?과 볼을 포장해서 구성하였다. 대표적인 3가지 실험을 통해서 지하 탐사 레이다의 B-scan 자료를 획득하여 2차원 그레이 스케일 영상으로 가시화하였다. B-scan 영상들의 비교를 통해 지하에 매설된 관 주변에 존재하는 지하 공동을 지하 탐사 레이다로 탐지할 수 있음을 보였다.

• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.117-126
• /
• 1998

For investigating rubber pad sheet metal forming process, the rubber pad deformation characteristics as well as the contact problem of rubber pad-sheet metal has been analyzed. In this paper, the behavior of the rubber deformation is represented by hyper-elastic constitutive relations based on a generalized Mooney-Rivlin model. Finite element procedures for the two-dimensional responses, employing total Lagrangian formulations are implemented in an implicit form. The volumetric incompressibility condition of the rubber deformation is included in the formulation by using penalty method. The sheet metal is characterized by elasto-plastic material with strain hardening effect and analyzed by a commercial code. The contact procedure and interface program between rubber pad and sheet metal are implemented. Inflation experiment of circular rubber pad identifies the behaviour of the rubber pad deformation during the process. The various form dies and scaled down apparatus of the rubber-pad forming process are fabricated for simulating realistic forming process. The obtaining experimental data and FEM solutions were compared. The numerical solutions illustrate fair agreement with experimental results. The forming pressure distribution according to the dimensions of sheet metal and rubber pads, various rubber models and rubber material are also compared and discussed.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2702-2713
• /
• 2022

A steam generator tube rupture accompanying a core damage may cause the fission product to be released to environment bypassing the containment. In such an accident, the steam generator is the major path of the radioactive aerosol release. AEOLUS facility, the scaled-down model of Korean type steam generator, was built to examine the aerosol removal in the steam generator during the steam generator tube rupture accident. Integral and separate effect tests were performed with the facility for the dry and flooded conditions, and the decontamination factors were presented for different tube configurations and submergences. The dry test results were compared with the existing test results and with the analyses to investigate the aerosol retention physics by the tube bundle, with respect to the particle size and the bundle geometry. In the flooded tests, the effect of submergence were shown and the retention in the jet injection region were presented with respect to the Stokes number. The test results are planned to be used to constitute the aerosol retention model, specifically applicable for the analysis of the steam generator tube rupture accident in Korean nuclear power plants to evaluate realistic fission product behavior.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권4호
• /
• pp.54-59
• /
• 2023

In this paper, we analyze experimental results by applying the PHILS model to a lab-scale superconducting current limiter system for its actual application in medium-voltage direct current (MVDC) systems. Superconducting current limiters exhibit effective current-limiting performance in circuit breaker operations, particularly in limiting large fault currents within a short period, addressing the challenges posed by the increasing use of renewable energy and the integration of DC medium-voltage distribution systems. The development of such superconducting current limiters faces various technical and cost disadvantages, especially when applying a medium-voltage 35kV level system, which is intended for future introduction. The proven lab-scale superconducting current limiter system and the PHILS model are combined and integrated into the actual system. Our plan involves analyzing the limiter's performance, assessing its impact on the system, and preparing for its application in future medium-voltage systems. Utilizing RTDS, a simulation was conducted by connecting actual scaled-down equipment and systems, with the analysis results presented.