• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.1
• /
• pp.31-36
• /
• 2009

This paper presents a novel scalar adaptive filter, which is reformulated by additional acceleration term. The filter continuously estimates three different kinds of covariance such as the measurement noise covariance, the velocity error covariance and the acceleration error covariance. For estimating three covariances, we use the innovation method for the measurement noise covariance and the least square method for other covariances. In order to verify the proposed filter performance compared with the conventional scalar adaptive filter, we make indoor experimental environment similar to outdoor test using the ultrasonic sensors instead of GPS. Experimental results show that the proposed filter has better position accuracy than the traditional scalar adaptive filter.

• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.3
• /
• pp.91-98
• /
• 1995

To control speed or torque of induction motors, scalar control method that regulates the value of stator current had been used conventionally. But, vector control method which contrls the direction and the value of stator current at the same time has been introduced lately and employed widely. This paper describes comparative analyses of above two methods by computer simulation. As a result of the simulation, both methods showed good responses for high speed, but, vector control method characterized much better performance for low speed and sinusoidal input.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.56.3-56
• /
• 2001

This study describes the jump error smoothing scheme with fuzzy logic based on the scalar adaptive filter. The scalar adaptive filter is an useful algorithm for smoothing abrupt jump errors. However, the performances of scalar adaptive algorithm depend on the variance of real signal. So to design an effective algorithm, many informations of real and jump signal are required. In this paper, the fuzzy rules are designed by the analysis of scalar adaptive filter, and then the improved and simplified scheme is developed for smoothing the jump error. Simulations to INS/GPS integrated system show that the proposed method is effective.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.39-41
• /
• 2003

n this paper, direct numerical simulation of decaying compressible turbulence with passive scalar is performed by using 7th order upwind difference scheme or 8th order group velocity control scheme. The start Reynolds number (defined by Taylor scale) is 72 and turbulent Mach numbers are 0.2-0.9. The Schmidt numbers of passive scalar are 2-10. The Batchelor k-1 range are found in scalar spectra, and the high wavenumber spectra decays faster with increasing turbulent Mach number. The extend self-similarity (ESS) is found in the passive scalar in compressible turbulence.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.5
• /
• pp.574-578
• /
• 1998

This paper considers the robust positive real problem for linear systems with linear fractional-type norm-bounded repeated scalar block parameter uncertainty. It is shown that the robust positive real problem can be converted into the standard positive real problem without uncertainty that can be used for the analysis of the given uncertain linear system and the synthesis of a controller that robustly stabilizes and achieves the extended strict positive realness property of the closed-loop transfer function. These results can be also applied to the linear system with general structured uncertainty containing repeated scalar block parameters and are extensions of the previous works that consider only norm-boundedness of the affine unstructured uncertainty.

• Transactions of Materials Processing
• /
• v.13 no.1
• /
• pp.33-38
• /
• 2004

A new approach for the design of extrusion die surface of arbitrarily shaped section is presented. In order to generate the extrusion die surface. an automatic surface construction method based on B-spline surface and scalar field theory is proposed. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u- and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections. To verify the validity and effectiveness of the proposed method, automatic surface generation is carried out for extrusion dies of arbitrarily shaped sections.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.12
• /
• pp.1015-1023
• /
• 2001

error behaviour can be considered as a linear combination of low amplitude random noise and abrupt jumps. The reason of jump appearance can be explained by the semi-shading effects(buildings, trees), jamming, high dynamic of vehicle and so on. This study describes the stand-alone GPS error jump smoothing algorithm which is developed based on the scalar adaptive filter. The algorithm consists of the coarse jump smoothing and the fine jump smoothing. On the coarse smoothing step, GPS velocities or position differences are used as the measurement for the scalar adaptive filter. The purpose of adaptive filter is to smooth the jump errors. The coarse positions are detennined by the integration of smoothed velocities. On the fine smoothing step, the differences between GPS positions and the coarse positions are smoothed by another scalar adaptive filter. The reason of fine smoothing is based on the facts that smoothing accuracy depends on the variance ofusefuJ signa\. The coarse smoothing which deal with the difference of positions provides the rough error removing. So the coarse smoothed velocities can have much more low amplitude than the raw ones. The fine smoothing procedure provides high quality of filtering process. Simulation results show the efficiency of proposed scheme.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.318-321
• /
• 2003

In order to generate the extrusion die surface of non-symmetric H- and U-shaped sections, an automatic surface construction method based on B-spline surface and scalar field theory is proposed in this study. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u- and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.197-200
• /
• 2003

An automatic surface construction method based on B-spline surface and scalar field theory is proposed to generate the extrusion die surface of complicated sections in this paper. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u- and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections.

• Journal of Magnetics
• /
• v.18 no.2
• /
• pp.95-104
• /
• 2013

This paper presents a general analytical method for predicting the magnetic fields of different Halbach magnet arrays with or without back iron mounted on slotless permanent magnet (PM) linear machines. By using Fourier decomposition, the magnetization components of four typical Halbach magnet arrays are determined. By applying special synthetic boundary conditions on the PM surfaces, the expressions of their magnetic field distributions are derived based on the magnetic scalar potential (MSP), which are simpler than those based on the magnetic vector potential (MVP). The correctness of the method is validated by finite element analysis. The harmonics of airgap flux density waveforms of these Halbach magnet arrays with or without back iron are also compared and optimized.