• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.65-67
• /
• 2018

We introduce a system that detects smoking in a specific area. The proposed system is implemented on a wireless ad hoc network consisting of Raspberry Pi boards. It is more economical owing to low-cost device than commercial smoking monitoring system and is scalable than the existing system with single Raspberry Pi. In this paper, the probability density function of carbon monoxide concentration during smoking and non-smoking is approximated as Gauusian distribution, respectively, using data measured from sensors for a long time. Based on this, a maximum likelihood detection technique is adopted to estimate the smoking status by observing the concentration of carbon monoxide. We aim at improving the reliability by estimating the smoking status using the collected values from multiple sensors connected to the ad hoc network.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.423-438
• /
• 2010

Wireless smart sensors enable new approaches to improve structural health monitoring (SHM) practices through the use of distributed data processing. Such an approach is scalable to the large number of sensor nodes required for high-fidelity modal analysis and damage detection. While much of the technology associated with smart sensors has been available for nearly a decade, there have been limited numbers of fulls-cale implementations due to the lack of critical hardware and software elements. This research develops a flexible wireless smart sensor framework for full-scale, autonomous SHM that integrates the necessary software and hardware while addressing key implementation requirements. The Imote2 smart sensor platform is employed, providing the computation and communication resources that support demanding sensor network applications such as SHM of civil infrastructure. A multi-metric Imote2 sensor board with onboard signal processing specifically designed for SHM applications has been designed and validated. The framework software is based on a service-oriented architecture that is modular, reusable and extensible, thus allowing engineers to more readily realize the potential of smart sensor technology. Flexible network management software combines a sleep/wake cycle for enhanced power efficiency with threshold detection for triggering network wide operations such as synchronized sensing or decentralized modal analysis. The framework developed in this research has been validated on a full-scale a cable-stayed bridge in South Korea.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.1
• /
• pp.54-61
• /
• 2018

In this study, two aspects were analyzed about the robot for removal of explosive devices. First, the cost analyses were performed to provide a reasonable solution for the acquirement of the system. It is processed by an engineering estimate method and the process was consisted of two ways : a system development expense and a mass production unit price. In additions, the resultant cost analyses were compared between the cases excluding and including a mines detection system. As results, in the case of the acquirement of the robot system for removal of explosive devices, it is recommended that the performance by improving the mines detection ability should be considered preferentially rather than the cost because the material cost for the mines detection system is negligible compared to the whole system cost. Second, as a way for improving the system performance by the mine detection function, the carbon nanotube (CNT) based sensor technology was studied in terms of sensitivity and simple productivity with presenting its preliminary experimental results. The detection electrodes were formed by a photolithography method using a photosensitive CNT paste. As results, this method was shown as a scalable and expandable technology for the excellent mines detection sensors.

• Journal of Korea Multimedia Society
• /
• v.25 no.8
• /
• pp.1075-1084
• /
• 2022

Internet of Things(IoT) has become a key available technology for efficiently implementing device to device(D2D) services in various domains such as smart home, healthcare, smart city, agriculture, energy, logistics, and transportation. A lightweight publish/subscribe(Pub/Sub) messaging protocol not only establishes data dissemination pattern but also supports connectivity between IoT devices and their applications. Also, a Pub/Sub broker is deployed to facilitate data exchange among IoT devices. A scalable edge-based publish/subscribe (Pub/Sub) broker overlay networks support latency-sensitive IoT applications. In this paper, we design a hypercube grid quorum(HGQ) for distributed Pub/Sub systems based IoT applications. In designing HGQ, the network of hypercube structures suitable for the publish/subscribe model is built in the edge layer, and the proposed HGQ is designed by embedding a mesh overlay network in the hypercube. As their applications, we propose an HGQ-based mechansim for dissemination of the data of sensors or the message/event of IoT devices in IoT environments. The performance of HGQ is evaluated by analytical models. As the results, the latency and load balancing of applications based on the distributed Pub/Sub system using HGQ are improved.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.653-658
• /
• 2023

In systems like the combat management system of a naval ship or smart city of civilians, where many sensors and actuators are connected, the middle-ware DDS (Data Distribution Service) is mainly used to transmit large amounts of data. It is scalable and can effectively respond to the increase in sensors or equipment connected to the system in the future. The engineering control system (ECS), which plays an important role similar to the combat management system of a naval ship, still uses Server-Client model with industrial protocols such as Modbus and CAN (Controller Area Network) bus, to transmit data, which is unfavorable in terms of scalability. However, as automation and unmanned systems advance, more sensors and actuators are expected to be added, necessitating substantial program modification. DDS can effectively address such situations. The purpose of this study is to confirm the development possibility of an integrated monitoring and control system of a ship by using OpenDDS, which follows the OMG (Object Management Group) standard among the middle-ware DDS used in the combat management system. To achieve this goal, field equipment simulators and an ECS server were configured to perform field equipment data input/output and simulation using DDS was performed. The ECS prototype successfully handled data transmission, confirming that DDS is capable of serving as the middle-ware for the ECS of a ship.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.549-549
• /
• 2012

Early detection of cancer biomarkers in the blood is of vital importance for reducing the mortality and morbidity in a number of cancers. From this point of view, immunosensors based on nanowire (NW) and carbon nanotube (CNT) field-effect transistors (FETs) that allow the ultra-sensitive, highly specific, and label-free electrical detection of biomarkers received much attention. Nevertheless 1D nano-FET biosensors showed high performance, several challenges remain to be resolved for the uncomplicated, reproducible, low-cost and high-throughput nanofabrication. Recently, two-dimensional (2D) graphene and reduced GO (RGO) nanosheets or films find widespread applications such as clean energy storage and conversion devices, optical detector, field-effect transistors, electromechanical resonators, and chemical & biological sensors. In particular, the graphene- and RGO-FETs devices are very promising for sensing applications because of advantages including large detection area, low noise level in solution, ease of fabrication, and the high sensitivity to ions and biomolecules comparable to 1D nano-FETs. Even though a limited number of biosensor applications including chemical vapor deposition (CVD) grown graphene film for DNA detection, single-layer graphene for protein detection and single-layer graphene or solution-processed RGO film for cell monitoring have been reported, development of facile fabrication methods and full understanding of sensing mechanism are still lacking. Furthermore, there have been no reports on demonstration of ultrasensitive electrical detection of a cancer biomarker using the graphene- or RGO-FET. Here we describe scalable and facile fabrication of reduced graphene oxide FET (RGO-FET) with the capability of label-free, ultrasensitive electrical detection of a cancer biomarker, prostate specific antigen/${\alpha}$ 1-antichymotrypsin (PSA-ACT) complex, in which the ultrathin RGO channel was formed by a uniform self-assembly of two-dimensional RGO nanosheets, and also we will discuss about the immunosensing mechanism.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.4
• /
• pp.231-237
• /
• 2018

In this study, two important requirements for the home production of a robot to detect and remove improvised explosive devices (IEDs) are presented in terms of the total cost for robot system development and the performance improvement of the mine detection technology. Firstly, cost analyses were performed in order to provide a reasonable solution following an engineering estimate method. As a result, the total cost for a mass production system without the mine detection system was estimated to be approximately 396 million won. For the case including the mine detection system, the total cost was estimated to be approximately 411 million won, in which labor costs and overhead charges were slightly increased and the material costs for the mine detection system were negligible. Secondly, a method for fabricating the carbon nanotube (CNT) based gas detection sensor was studied. The detection electrodes were formed by a photolithography process using a photosensitive CNT paste. As a result, this method was shown to be a scalable and expandable technology for producing excellent mine detection sensors. In particular, it was found that surface treatments by using adhesive taping or ion beam bombardment methods are effective for exposing the CNTs to the ambient air environment. Fowler-Nordheim (F-N) plots were obtained from the electron-emission characteristics of the surface treated CNT paste. The F-N plot suggests that sufficient electrons are available for transport between CNT surfaces and chemical molecules, which will make an effective chemiresistive sensor for the advanced IED detection system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.687-689
• /
• 2014

Due to the development of health promotion and health care technology of smartphones paradigm from treatment to manage change, and this is increasing the fitness in time for the user. However, fitness club, users find the right exercise law-personal trainer must be costly to pay companies describes the management system is required in order to operate the high costs strain. In this paper, such as scalable servers to OpenWrt Fonera is mainly based on the client to configure the server iOS mobile sensors collect a user's movement through the history of the user's input. This data is sent to the Web and check whether the receiving system via a trainer is to record the users through weight training and to receive feedback.

• Journal of Sensor Science and Technology
• /
• v.31 no.5
• /
• pp.312-317
• /
• 2022

Piezoelectric energy harvesting has attracted increasing attention over the last decade as a means for generating sustainable and long-lasting energy from wasted mechanical energy. To develop self-powered wearable devices, piezoelectric materials should be flexible, stretchable, and bio-eco-friendly. This study proposed the fabrication of stretchable piezoelectric composites via dispersing perovskite-structured BaTiO₃ nanoparticles inside an Ecoflex polymeric matrix. In particular, the stretchable piezoelectric sensor array was fabricated via a simple and cost-effective spin-coating process by exploiting the piezoelectric composite comprising of BaTiO₃ nanoparticles, Ecoflex matrix, and stretchable Ag coated textile electrodes. The fabricated sensor generated an output voltage of ~4.3 V under repeated compressing deformations. Moreover, the piezoelectric sensor array exhibited robust mechanical stability during mechanical pushing of ~5,000 cycles. Finite element method with multiphysics COMSOL simulation program was employed to support the experimental output performance of the fabricated device. Finally, the stretchable piezoelectric sensor array can be used as a self-powered touch sensor that can effectively detect and distinguish mechanical stimuli, such as pressing by a human finger. The fabricated sensor demonstrated potential to be used in a stretchable, lead-free, and scalable piezoelectric sensor array.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.2
• /
• pp.223-229
• /
• 2024

Laser-induced plasmonic sintering of metal nanoparticles (NPs) holds significant promise as a technology for producing flexible conducting electrodes. This method offers immediate, straightforward, and scalable manufacturing approaches, eliminating the need for expensive facilities and intricate processes. Nevertheless, the metal NPs come at a high cost due to the intricate synthesis procedures required to ensure long-term reliability in terms of chemical stability and the prevention of NP aggregation. Herein, we induced the self-generation of metal nanoparticles from Ag organometallic ink, and fabricated highly conductive electrodes on flexible substrates through laser-assisted plasmonic annealing. To demonstrate the practicality of the fabricated flexible electrode, it was configured in a mesh pattern, realizing multi-touchable flexible touch screen panel.