• 제목/요약/키워드: Sb2Te3

검색결과 161건 처리시간 0.022초

팔라듐-안티몬-테루르 계(系)의 상평형(相平衡)과 지질학적(地質學的) 의의(意義) (Phase Equilibria of the System Pd-Sb-Te and Its Geological Implications)

  • 김원사
    • 자원환경지질
    • /
    • 제26권3호
    • /
    • pp.327-335
    • /
    • 1993
  • 자연에는 팔라듐을 주성분으로 하는 백금족광물이 다수 산출되고 있다. 그 중 일부 광물은 독립된 광물로서 결정학적 광물학적 연구가 잘 되어 있는 반면 아직도 광물로서의 특성이 완전하게 규명되지 못한 경우도 상당수가 있다. 따라서 이 연구에서는 팔라듐-안타몬-테루르 성분계를 택해 이 3성분계에서의 상관계를 $1000^{\circ}C$, $800^{\circ}C$, $600^{\circ}C$에서 각각 연구하고 이들 연구결과를 천연광물을 보다 체계적으로 규명 보완하는데 적용시키는 것을 그 연구 목적을 두었다. 합성실험을 위해 순수한 원소물질을 정량적으로 혼합시킨 후 실리카 튜브에 넣고 진공상태에서 밀봉하였다. 전기 고온로에서 가열반응시킨 시료는 얼음물을 이용해 급냉시켰으며 반응물은 반사현미경, 전자현미분석, X선 회절법 등으로 분석하였다. $1000^{\circ}C$에서 안정한 고체로는 Pd, $Pd_{20}Sb_7$, $Pd_8Sb_3$, $Pd_{31}Sb_{12}$, $Pd_5Sb_2$가 있다. $800^{\circ}C$에서는 $Pd_5Sb_3$, PdSb, $Pd_8Te_3$, $Pd_7Te_3$, $Pd_{20}Tc_7-PdSb_7$ 완전고용체가 추가로 존재한다. $600^{\circ}C$에서는 $PdSb_2$, $Pd_{17}Te_4$, $Pd_9Te_4$, PdTe, $PdTe_2$, $Sb_2Te_3$, Sb, 그 밖에 PdSb-PdTe와 PdTe-$PdTe_2$ 고용체가 다시 안정한 고체 화합물로 추가된다. 모든 고체 화합물이 Sb와 Te간의 원소치환에 의해 고용체를 이루고 있으며 그 고용한계의 범위는 생성온도에 따라 변한다. Pd-Sb화합물에서 안티몬(Sb)를 치환하는 테루르(Te) 최대 치환범위(at.%)는 $Pd_8Sb_3$에서 44.3, $Pd_{31}Sb_{12}$에서 52.0, $Pd_5Sb_2$에서 46.2이며 그 최대 치환현상은 $800^{\circ}C$에서 일어난다. $Pd_5Sb_3$$PdSb_2$에서의 최대 치환은 $600^{\circ}C$에서 일어나며 그 정도는 각각 15.3, 68.3이다. Pd-Te화합물에서 Te를 치환하는 Sb의 최대치(at.%)는 $Pd_8Te_3$$800^{\circ}C$에서 34.5, $Pd_7Te_3$, $Pd_{17}Te_4$, $Pd_9Te_4$, $PdTe_2$$600^{\circ}C$에서 각각 41.6, 5.2, 19.1로 나타난다. $Pd_9Te_4$, PdTe, $PdTe_2$, $Pd_8Sb_3$, PdSb, $Sb_2Te_3$는 각각 tellurantimony와 일치하며 광학적 결정구조적 성질이 매우 잘 일치한다. 지금까지 등축정계의 Pa3구조를 가지고 있는 것으로 알려진 $PdSb_2$화합물은 Gandolfi camera와 Guinier camera법에 의해 310으로 격자 지수화할 수 있는 $2.035{\AA}$ peak가 일정하게 기록이 되므로 $P2_13$공간군에 속하는 것으로 재평가 된다. Testibiopal1adite의 성분을 가지는 PdSbTe성분의 화합물을 합성하여 X선 회절분석을 실시하면 testibiopalladite의 X선 회절양상과 일치함을 알 수 있다. 이 사실은 testibiopalladite가 등축정계이며 동시에 $P2_13$공간군에 속하는 $PdSb_2-Pd(Sb_{0.32}Te_{0.68})$고용체의 일부분에 속하는 광물임을 알 수 있게 한다. 따라서 현재의 testibiopalladite의 이상화학식인 PdSbTe는 PdTe(Sb, Te)로 바뀌어져야 할 것으로 믿어진다. $Pd_3SbTe_4$로 표현되는 borovskite는 $1000^{\circ}{\sim}600^{\circ}C$의 온도범위에서는 존재하지 않음을 알 수 있다.

  • PDF

마그네트론 스퍼터링법으로 제조한 P형 $(Bi_{1-X}Sb_X)_2Te_3$ 박막의 결정성과 열전특성 (Crystallization behavior and thermoelectric properties of p-type $(Bi_{1-X}Sb_X)_2Te_3$ thin films prepared by magnerron sputtering)

  • 연대중;오태성
    • 한국진공학회지
    • /
    • 제9권4호
    • /
    • pp.353-359
    • /
    • 2000
  • 마그네트론 스퍼터링법으로 p형 ($Bi_{0.15}Sb_{0.85})_2Te_3$과 ($Bi_{1-x}Sb_x)_2Te_3$ 열전박막을 제조하여 스퍼터 증착 조건 및 $Sb_2Te_3$ 함량에 따른 열전특성을 분석하였다. Corning glass 기판을 10rpm으로 회전시키며 DC 스퍼터링법으로 $300^{\circ}C$에서 증착한($Bi_{0.15}Sb_{0.85})_2Te_3$ 박막은 $(Bi, Sb)_2Te_3$ 단일상으로 결정화가 완료되고 c축 우선배향성을 나타내었으며, 다른 조건으로 증착한 ($Bi_{0.15}Sb_{0.85})_2Te_3$ 박막보다 높은 185 $\mu$V/K의 Seebeck 계수를 나타내었다. p형(Bi$_{1-x}$ Sb$_{x}$)$_2$Te$_3$ (0.77$\leq$x$\leq$ 1.0) 박막에서는 Sb$_2$Te$_3$ 함량이 증가함에 따라 Seebeck 계수와 전기비저항이 감소하였으며($Bi_{1-x}Sb_x)_2Te_3$조성에서 $0.79\times10^{-3}W/K^2$-m의 최대 출력인자를 나타내었다.

  • PDF

A Simple and Quick Chemical Synthesis of Nanostructured Bi2Te3, Sb2Te3, and BixSb2-xTe3

  • Kim, Hee-Jin;Lee, Ki-Jung;Kim, Sung-Jin;Han, Mi-Kyung
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권5호
    • /
    • pp.1123-1127
    • /
    • 2010
  • We report a simple and quick route for the preparation of high-quality, nearly monodisperse $Bi_2Te_3$, $Sb_2Te_3$, and $Bi_xSb_{2-x}-Te_3$ nanocrystallites. The reactions of bismuth acetate or antimony acetate with Te in oleic acid result in pure phase of $Bi_2Te_3$ or $Sb_2Te_3$ nanoparticles, respectively. Also, ternary $Bi_xSb_{2-x}Te_3$ nanoparticles were successfully synthesized using the same method. The size and morphology of the nanoparticles were controlled by varying the stabilizing agents. The as-prepared nanoparticles are characterized by X-ray diffraction, scanning electron microscope, and high-resolution transmission electron microscope using an energy dispersive spectroscopy.

환원분위기 열처리가 $(Bi,Sb)_{2}Te_{3}$ 증착박막의 열전특성에 미치는 영향 (Efface of Annealing in a Reduction Ambient on Thermoelectric Properties of the $(Bi,Sb)_{2}Te_{3}$ Thin Films Processed by Vacuum Evaporation)

  • 김민영;오태성
    • 마이크로전자및패키징학회지
    • /
    • 제15권3호
    • /
    • pp.1-8
    • /
    • 2008
  • 환원분위기 열처리가 진공증착법으로 형성한 $(Bi,Sb)_{2}Te_3$박막의 열전특성에 미치는 영향을 연구하였다. 환원분위기(50% $H_2$ + 50% Ar)에서 $300^{\circ}C$의 온도로 2시간 유지하여 열처리함으로써 $(Bi,Sb)_{2}Te_3$박막의 결정성이 크게 향상되었으며 결정립 크기가 크게 증가하였다. 환원분위기 열처리에 의한 정공농도의 감소에 기인하여 $(Bi,Sb)_2Te_3$박막의 Seebeck계수가 열처리 전의 $\sim90{\mu}V/K$로부터 $\sim180{\mu}V/K$으로 증가하였다. 환원분위기 열처리에 의해 $(Bi,Sb)_{2}Te_3$ 박막의 출력인자(power factor)가 5배에서 16배 정도 향상되었으며, 환원분위기 열처리 후 $(Bi,Sb)_{2}Te_3$ 박막은 $18.6\times10^{-4}W/K^{2}-m$의 최대 출력인자를 나타내었다.

  • PDF

광화마그마내에서의 백금, 안티모니, 테루리움 거동에 관한 연구(I) (Behavior of Pt, Sb, Te during Crystallizaion of Ore Magma (I))

  • 김원사
    • 한국광물학회지
    • /
    • 제9권2호
    • /
    • pp.93-101
    • /
    • 1996
  • Behavior of platinum group elements during crystallization within ore magma is of interest. In this study platinum is selected and its mineralogical and geochemical behavior in the presence of antimony and tellurium is investigated at 600$^{\circ}C$. High purity Pt, Sb, and Te are used as starting material and silica quartz tubings are as container. Rection products have been examined by use of ore microscope, X-ray diffractometer, electron microprobe analyser and micro-indentation hardness tester. stable phases at 600$^{\circ}C$ are platinum (Pt), Pt5Sb, Pt3Sb, PtSb, stumpflite (PtSb), geversite (PtSb), PtTe, Pt3Te4, Pt2Te3, moncheite (PtTe2), tellurantimony (Sb2Te3), and antimony (Sb). Geversite is the mineral showing the most significant extent of solid solution by up to 27 at% between Sb and Te elements. Isothermal section of 600$^{\circ}C$ is established in this study. It is noted that platinum cannot coexists with stumpflite or geversite under equilibrium condition, and stumpflite composition in equilibrium with geversite may be used as geothermometer.

  • PDF

전착법에 의한 p-형 SbxTey 박막 형성 및 열전특성 평가 (Electrodeposition and Characterization of p-type SbxTey Thermoelectric Thin Films)

  • 박미영;임재홍;임동찬;이규환
    • 한국재료학회지
    • /
    • 제21권4호
    • /
    • pp.192-195
    • /
    • 2011
  • The electro-deposition of compound semiconductors has been attracting more attention because of its ability to rapidly deposit nanostructured materials and thin films with controlled morphology, dimensions, and crystallinity in a costeffective manner (1). In particular, low band-gap $A_2B_3$-type chalcogenides, such as $Sb_2Te_3$ and $Bi_2Te_3$, have been extensively studied because of their potential applications in thermoelectric power generator and cooler and phase change memory. Thermoelectric $Sb_xTe_y$ films were potentiostatically electrodeposited in aqueous nitric acid electrolyte solutions containing different ratios of $TeO_2$ to $Sb_2O_3$. The stoichiometric $Sb_xTe_y$ films were obtained at an applied voltage of -0.15V vs. SCE using a solution consisting of 2.4 mM $TeO_2$, 0.8 mM $Sb_2O_3$, 33 mM tartaric acid, and 1M $HNO_3$. The stoichiometric $Sb_xTe_y$ films had the rhombohedral structure with a preferred orientation along the [015] direction. The films featured hole concentration and mobility of $5.8{\times}10^{18}/cm^3$ and $54.8\;cm^2/V{\cdot}s$, respectively. More negative applied potential yielded more Sb content in the deposited $Sb_xTe_y$ films. In addition, the hole concentration and mobility decreased with more negative deposition potential and finally showed insulating property, possibly due to more defect formation. The Seebeck coefficient of as-deposited $Sb_2Te_3$ thin film deposited at -0.15V vs. SCE at room temperature was approximately 118 ${\mu}V/K$ at room temperature, which is similar to bulk counterparts.

분할접합비에 따른 (Pb,Sn)Te/(Bi,Sb)2Te3 경사기능소자의 열전발전특성 (Thermoelectric Power Generation Characteristics of the (Pb,Sn)Te/(Bi,Sb)2Te3Functional Gradient Materials with Various Segment Ratios)

  • 이광용;현도빈;오태성
    • 한국재료학회지
    • /
    • 제12권12호
    • /
    • pp.911-917
    • /
    • 2002
  • 0.5 at% $Na_2$Te-doped ($Pb_{0.7}Sn_{0.3}$)Te and ($Bi_{0.2}Sb_{0.8}$)$_2$$Te_3$ powders were fabricated by mechanical alloying process. 0.5 at% Na$_2$Te-doped ($Pb_{0.7}Sn_{0.3}$)Te powders were charged at one end of mold and ($Bi_{0.2}Sb_{0.8}$)$_2$$Te_3$ powders were charged at the other end of a mold. Then these powders were hot-pressed to form p-type ($Pb_{0.7}Sn_{0.3}$)Te/($Bi_{0.2}Sb_{0.8}$)$_2$$Te_3$ functional gradient materials with the segment ratios (the ratio of ($Pb_{0.7}Sn_{0.3}$)Te to ($Bi_{0.2}Sb_{0.8}$)$_2$$Te_3$ ) of 1:2, 1:1, and 2:1. Power generation characteristics of the ($Pb_{0.7}Sn_{0.3}$)Te/($Bi_{0.2}Sb_{0.8}$)$_2$$Te_3$ were measured. When the temperature difference ΔT at both ends of the specimen was larger than $300^{\circ}C$, the ($Pb_{0.7}Sn_{0.3}$)Te/($Bi_{0.2}Sb_{0.8}$)$_2$$Te_3$ with the segment ratios of 1:2 and 1:1 exhibited larger output power than those of the ($Bi_{0.2}Sb_{0.8}$)$_2$$Te_3$ and 0.5 at% $Na_2$ Te-doped ($Pb_{0.7}Sn_{0.3}$)Te alloys. The maximum output power of the ($Pb_{0.7}Sn_{0.3}$)Te/($Bi_{0.2}Sb_{0.8}$)$_2$$Te_3$ predicted with the measured Seebeck coefficient and the estimated electrical resistivity was in good agreement with the measured maximum output power.

ReRAM응용을 위한 Ge2Sb2Te5와 Ge8Sb2Te11 기반 MIM구조 박막의 전기적 특성 연구 (A Study on the Electrical Properties of MIM Structures Based on Ge2Sb2Te5 and Ge8Sb2Te11 Thin Films for ReRAM)

  • 장휘종;공헌;여종빈;이현용
    • 한국전기전자재료학회논문지
    • /
    • 제30권3호
    • /
    • pp.144-147
    • /
    • 2017
  • In this study, $Ge_2Sb_2Te_5$ and $Ge_8Sb_2Te_{11}$ were used as an insulator layer to fabricate ReRAM devices. The resistance change is correlated to the appearance or disappearance of a conductivity filament at the surface of the GeSbTe layer. Changes in the electrical properties of ITO/GeSbTe/Ag devices were measured using a I-V-L measurement system. As a result, compared to the $ITO/Ge_8Sb_2Te_{11}/Ag$ device, this $ITO/Ge_2Sb_2Te_5/Ag$ ReRAM device exhibits highly uniform bipolar resistive switching characteristics, such as the operating voltages, and the resistance values.