• 제목/요약/키워드: Saving Elements

검색결과 126건 처리시간 0.028초

A Study on Pilots' Behavior on Decision of Maneuvering Aircraft for Fuel Efficient Flight Operation

  • Yoo, Kwang Eui;Jeon, Seung Joon
    • 한국항공운항학회지
    • /
    • 제27권4호
    • /
    • pp.96-104
    • /
    • 2019
  • The response to climate change of international air transport industry might be initiated by ICAO's CORSIA (Carbon Offsetting and Reduction Scheme for International Aviation) which will impact on international airlines' flight operation behavior in the future. Though the airlines' efforts to reduce fuel consumption has been a major issue in economics of aviation industry, the improvement of fuel efficiency in flight operation will have additional impact on their profitability by introducing carbon emission cost. The fuel consumption in flight operation will be somewhat influenced by pilots' technical action for maneuvering aircraft during flight operation. This study will investigate pilots' behavior on decision for tactical aircraft control for mission flight. The data will be collected by the survey through sample pilots asking about their intention and perception on fuel savings during flight operations. The data will be analyzed by AHP process and the study will find out the elements and factors influencing pilots' behavior on technical decision of flight and their weights on fuel saving effects.

Feasibility Analysis for Introducing ESCO Program of LED Luminaire Replacements in Schools

  • Shin, Hyunman;Jang, Woojin
    • 조명전기설비학회논문지
    • /
    • 제30권1호
    • /
    • pp.8-13
    • /
    • 2016
  • Public institutions should replace their luminaires with LED lighting by 2020 to save energy. Because the LED lighting installation rate in schools has not yet reached the legal goal, the ESCO program feasibility was investigated. The amount of electricity used, electric rates, times of use in classrooms and fluorescent lighting maintenance costs etc., as well as the elements of lighting maintenance were analyzed. In the case of schools, the lamp usage time was so short that the ESCO projects with only energy savings were impossible. In order to execute the ESCO projects, the maintenance cost savings by replacing an existing luminaire should be considered and the introduction of the relatively cheaper tube type LED lamp than the flat type LED luminaire was required.

전기에너지주택의 유동적인 실험환경을 고려한 가전기기 제어 시뮬레이션 방안에 관한 연구 (A Study on the Control Simulation Method of Home Appliances Considering the Flexible Experimental Condition of All-Electrified Houses)

  • 황성욱;김강식;나환선;조병옥
    • 한국기계기술학회지
    • /
    • 제13권1호
    • /
    • pp.57-64
    • /
    • 2011
  • Recently, all-electrified houses have constructed and some tasks are being carried out to monitor energy consumption patterns. The energy monitoring includes various elements such as temperature, pressure, water flow, $CO_2$, and electricity. In this monitoring, electricity consumption is one of the essential factors because the performance and energy saving levels are described by this physical quantity. This quantity depends on materials, structure, operation of the house, which operation means consumer's life style and usage patterns of home appliances furthermore. Firstly, this paper shows a control simulation method which were developed a few years ago. And some different methods are proposed considering flexible experimental condition.

독일 공동주택 놀이터의 친환경적 특성 연구 (A Study on the Eco-friendly Properties of Apartment Housing Playground in Germany)

  • 김자경
    • 한국실내디자인학회논문집
    • /
    • 제24권5호
    • /
    • pp.87-98
    • /
    • 2015
  • As an apartment house as well as improving quality of life is becoming one of the brands, it is increasing the importance of the outer space with the facilities in the housing complex. In particular, the outdoor playground such as the community facilities that children and adults share as the activity areas for residents has received attention. However, actually children have not used many of Korean apartment housing playgrounds that were installed formally in the scrap area according to the housing plan by residential construction standards. it is considered necessary to improve the quality of the playground in housing complex and reform it in order to make the eco-friendly play space in which children can play safely and h healthily. As an alternative, we analyzed the eco-friendly properties of the playgrounds installed in the eco-friendly housing complex in Germany and derived the main planning elements of eco-friendly playground. In the observational survey of the 10 playgrounds in 9 housing complexes in 5 regions in Germany, we evaluated the environment-friendliness of these playgrounds in the 8 fields(location and placement, ecological environment, play space, play equipment and facilities, additional facilities, materials and resources, energy saving, environmental load reduction) according to the levels(suitable, partial reflection, unsuitable, non-reflection) of reflection of eco-friendly planning factors. The following is the summary of the results about the reflection of eco-friendly planning factors. In terms of "suitable": location and placement(88.8%), play equipment and facilities(73.5%), additional facilities(60.6%), environmental load reduction(54%), and ecological environment(50%) were higher than others. In terms of "unsuitable": there was nothing. In terms of "non-reflection": energy saving(95%), additional facilities(32.2%), and materials and resources(30.9%) were in order. Therefore, on the basis of these results, this study proposed the planning indicators to be considered first and the planning factors that should be complemented and improved in the construction of apartment housing playground in future.

태양광과 압전소자를 이용한 융복합 LED 발광 과속방지턱 겸용 가로등 개발 (Development of Convergence LED Streetlight and Speed Bump Using Solar Cell and Piezoelectric Element)

  • 남의석;조한진
    • 디지털융복합연구
    • /
    • 제14권5호
    • /
    • pp.325-331
    • /
    • 2016
  • 야간에 가로등이 없는 지방 국도 또는 우천시에 과속 방지턱이 보이질 않아 과속방지턱에 거의 근접하여 급 브레이크를 밟는 경우가 종종 발생하여 사고가 발생한다. 또한, 논 또는 밭과 인접한 지방 국도의 경우 농작물의 피해를 줄이고자 가로등 설치를 못하는 실정이다. 이 경우 야간에 사람들이 길을 다니는 경우 특히 검은색 계열의 옷을 입고 다니는 경우 사람의 존재를 운전자가 인식하지 못해 잦은 사고가 발생한다. 이 경우, 파장이 긴 색깔의 LED 가로등을 설치하면 농작물의 피해를 주지 않고 사람의 존재만 구별할 수 있어 교통사고를 줄일 수 있다. 따라서, 본 논문에서는 이를 위하여 과속방지턱에 LED를 부착하여 점등함로써 사전의 속도를 줄여 사고를 줄일 수 있고 또한 농작물에 피해를 주지 않으면서 인사 교통사고를 줄일 수 있는 태양광 및 압전소자를 이용한 절전형 LED 자동점등 지방국도(논로) 교통사고 방지 및 과속방지턱 겸용 가로등을 개발하였다. 태양광 및 압전소자를 이용 전력을 축척하여 LED를 점등하는 방식으로 조도센서를 사용하지 않고 태양광 소자의 에너지 축적 여부를 이용하여 LED를 ON/OFF한다. 또한 압전소자도 이용함으로써 여름철 장마에 태양광에 의한 축적이 부족한 경우를 대비할 수 있고, 또한 저전력 설계를 구현하여 최소 3일 이상 무충전시에도 정상 작동하도록 구현하였다.

목질 마감재 구성에 따른 주거용 건축물 부위별 열교 및 전열성능 분석 (Thermal Bridge and Heat Transfer Analysis for Each Part in Residential Building According to Construction of Wood-based Finishing Material)

  • 서정기;정수광;김수민
    • Journal of the Korean Wood Science and Technology
    • /
    • 제45권3호
    • /
    • pp.343-359
    • /
    • 2017
  • 건축물에서 사용되는 에너지를 줄이기 위하여 다양한 연구 및 정책이 진행되고 있으나 건축물에서 구조재 및 실내 외 마감재로 폭넓게 사용되는 목재의 열적 특성에 관한 연구는 미미한 실정이다. 이에 따라, 본 연구는 목질재료와 비 목질재료의 전열성능을 분석하기 위하여 목질재료가 주로 이용되는 주거용 건축물을 대상으로 열성능이 취약한(열교 발생) 부위를 선정하고, 각 부위별로 구조재와 마감재의 구성에 따라 총 16 Case에 대해 전열성능 분석을 실시하였다. 전열 해석 시뮬레이션 도구는 ISO 10211의 계산 방법을 따르는 Physibel Trisco를 이용하였다. 해석 부위의 모델링 역시 ISO 10211에서 제시된 기준에 의해 실시하였으며, 경계 온도 조건은 에너지절약설계기준에 따라 실내온도 $20^{\circ}C$, 실외온도 $-11.3^{\circ}C$(서울 기준)로 설정하였다. 구조는 콘크리트구조와 비 목질재료마감, 콘크리트구조와 목질재료마감 그리고 목구조에 목질재료마감의 경우에 따라 구분하였다. 부위는 벽체, 지붕, 층간바닥 및 최하층 바닥 등으로 구분하여 시뮬레이션을 진행하였다. 결과로서, 콘크리트구조의 경우 형상적 원인에 의해, 목구조의 경우 형상적인 원인에 재료적 원인이 더해져 다발적으로 열교가 발생함을 확인할 수 있었다. 추가적으로 콘크리트구조에서는 단열재의 불연속 부위에서 구조적인 열교가 발생하고 목구조에서는 구조적인 열교와 이질재료의 적용 부위에서 재료적 원인에 의한 열교가 발생하는 것을 확인할 수 있었다. 또한 콘크리트 구조에 목질 실내마감재를 적용하였을 경우에는 벽체의 선형 열관류율 값이 감소하는 것을 확인할 수 있었다.

The Energy Analysis and Evaluation of the NEO-Hanok

  • Han, Sang Hee;Park, So Yeon;Park, Hyo Soon
    • KIEAE Journal
    • /
    • 제14권2호
    • /
    • pp.77-86
    • /
    • 2014
  • Plenty of efforts have been made in the traditional architecture of Korea, Hanok, to develop various elements such as restoration, the introduction of new design, and energy-saving while systemic setups on standard and evaluation of eco-friendly energy design of Hanok are lacking. If we evaluate energy performance based on current standards without reflecting unique features of Hanok on the system, Hanok will be included in the very low grade among the residential buildings being included in the approval system of eco-friendly architecture or the unique features will be modified and the burden of increased construction cost. Therefore, this study is to prepare the basic reference for the introductory evaluation system by evaluating the energy performance level of NEO-Hanok based on the current building energy rating system. The result for NEO-Hanok based on the building energy rating system, we propose the rating standard with scorecard elements of NEO-Hanok by considering the necessity of identity and standard for NEO-Hanok. As a result of infiltration test to check the tightness, it was measured as 10.81 times/h (50 ACH). As we switch from the main insulation for the wall from the glass wool 64k(0.035W/mk) to rigid polyurethane foam first class first unit (0.024W/mk), the result was slightly increased from the first demand quantity rating yield $249.8kWh/m^2{\cdot}yr$ to $235.0kWh/m^2{\cdot}yr$. Current certificate system is focused more on the heating load than the cooling load, it is disadvantageous for Hanok, which has less cooling energy consumption in summer. The rating result from the target building study is level 4.

재사용 비즈니스 모델을 이용한 컴포넌트 버전 관리 설계 (Design of Component Version Management using Reuse Business Model)

  • 김영선;오상엽;장덕철
    • 정보처리학회논문지D
    • /
    • 제10D권1호
    • /
    • pp.67-76
    • /
    • 2003
  • 소프트웨어의 재사용은 소프트웨어의 생산성을 향상시키기 위해 미리 만들어진 소프트웨어의 컴포넌트를 이용하는 것이다. 전자상거래의 발달은 비즈니스 모델의 변화를 신속하게 변경하여 반영할 수 있는 소프트웨어를 요구하게 된다. 이런 전자상거래의 변화하는 환경에 신속히 대응하기 위해 재사용은 필수적인 해결책이다. 이러한 재사용 비즈니스 모델은 버전 관리에서 제공하지 못하는 난전이 있다. 이를 보완하여 본 논문에서는 재사용 비즈니스 모델에 대한 신속한 변경 관리를 도입하여 컴포넌트를 재사용함으로써 소프트웨어 개발비용을 절감하고 개발기간을 단축시킬 수 있도록 한다. 새로운 재사용 비즈니스 모델에 의해 컴포넌트를 재사용함으로써 소프트웨어 설계에서 구현까지의 위험요소를 최소화시킬 수 있는 장점을 가진다. 소프트웨어의 재사용을 구현하기 위한 기술로 컴포넌트를 도입하여 컴포넌트에 대한 구성요소를 글 버전으로 관리함으로써 재사용의 효율성을 높일 수 있는 방법을 버전 관리를 이용하여 제시하고자 한다.

왕곡마을 민가의 공간구성에 관한 연구 (A Study on the Spatial Composition of the Folk Houses at Wanggok Village)

  • 최장순;조현길
    • 한국주거학회논문집
    • /
    • 제18권5호
    • /
    • pp.1-10
    • /
    • 2007
  • This study is to analyze the residential spatial composition structures of vernacular agricultural village which to be called Wanggok in Yeongdong area. The results of this study are as follows; ${\cdot}$ The backyard of farmhouses is surrounded by a fence and a frontyard is open to the road, so that the spatial realm system from the road to the backyard is classified as public-semi public-private realm. ${\cdot}$ The plan type of this village is mainly composed of ㅡ type Gyeobjib (the two row rooms under one roof) and ㄱ type Gyeobjib, the Anmaru (the inner wood floor to be surrounded with wall) in both of which plays an important role that connects Sarangbang (the men's main room) with Anbang (the women's main room) in the residential space. ${\cdot}$ The particular item that not found out in another area is the Sarangbang kitchen which located to Sarangbang's side wall to be furnished with a fire hole. ${\cdot}$ The houses represent the socio-cultural environmental elements of those built days, such as while Sarangbang is faced on a frontyard to be open to the neighborhood, Anbang is faced on a backyard surrounded with a fence to be closed to the one. ${\cdot}$ The Gyeobjib with Anmaru appeared by cultural transformation connecting the 田-shaped house of Hamgyeongdo with the Gyeobjib with Anmaru of Gangwondo and Gyeongsangbukdo. ${\cdot}$ The ㄱ type Gyeobjib is preferred to ㅡ type Gyeobjib because of the sea wind and the north-east wind occurring by geographical and climatic environment elements, the privacy protection according to look into a frontyard, the muck drainage of cowshed to make use of ground unevenness, the economic gains called material saving and the intention to enlarge the frontyard as to be concentrated in a residential space and etc.

철스크랩의 리사이클링 (Recycling of Ferrous Scraps)

  • 손호상
    • 자원리싸이클링
    • /
    • 제29권1호
    • /
    • pp.3-16
    • /
    • 2020
  • 본 논문에서는 철강제조 프로세스, 철스크랩의 전처리와 미량 원소, 그리고 철강공정에서 발생하는 분진의 리사이클링 기술에 대해 고찰하였다. 철강은 인류가 가장 많이 사용하는 범용 금속으로, 2018년 기준 전세계 조강 생산량은 18억 톤을 초과하였다. 철을 리사이클링하면 철광석으로부터 환원하여 철강재를 얻는 것에 비하여 CO2 발생량은 약 42 % 수준이며, 에너지는 약 60 %를 절약할 수 있다. 철스크랩은 스크랩을 주원료 사용하는 전기로제강과 철광석을 주원료로 사용하는 전로 제강공정에서 리사이클링되고 있다. 철스크랩을 주원료로 사용하는 전기로 제강법은 스크랩을 예열하는 장치를 부가한 에너지 절약형으로 바뀌어 가고 있다. 철강 제조공정에서 발생하는 분진은 제철소 내에서 다양한 방법으로 리사이클링하여 철분과 아연 등을 회수하고 있다.