• Korean Journal of Ecology and Environment
• /
• v.36 no.2 s.103
• /
• pp.139-149
• /
• 2003

This study was conducted to determine limiting nutrients and the physiological characteristics of phytoplankton in response of nutrients in Lake Paldang from March 2002 to October 2002. A field research was conducted along with laboratory batch culture experiment to find the limiting nutrients and the growth kinetics. According the results of Chl. a TP relationship, TN/TP ratio, and nutrient addition bioassay, phosphorus appeared to be a major limiting nutrient in Lake Paldang and thus the lake productivity was greatly influenced by it. P limitation for the phytoplankton of Lake Paldang varied with season, and the possibility of limitation by nitrogen and silica also occurred. The degree of P limitation was greatest during spring when the concentration of dissolved phosphorus is relatively much lower than summer and autumn. The maximum growth rate (${\mu}_{max}$) and half saturation concentration ($K_u$) of Lake Paldang phytoplankton ranged from 0.8${\sim}$1.1$day^1$ and from 0.1${\sim}$O.8${\mu}M$, respectively. $K_u$ was highest during May ($0.8{\mu}M$) and the lowest during September ($0.1{\mu}M$). Such result may be induced by the phytoplankton cell quota that showed the lowest concentration ($0.13{\mu}gP/{\mu}gChl.$ a) during May. The growth kinetics showed that phytoplankton growth in Lake Paldang was faster during summer and autumn than spring, suggesting that the Potential of algal bloom is high after the summer monsoon season.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.1040-1044
• /
• 1995

Magnetic garnet films of (YSmLuCa)$_3$(FeGe)$\_$5/O$\_$12/ have been grown by the liquid phase eqitaxy method on the substrate of non-magnetic garnet Gd$_3$Ga$\_$5/O$\_$12/. The variation of Sm ion concentration were varied 0.3, 0.4, 0.6, mole/formula unit respectively. The magnetic properties of the samples for the bubble magnetic materials, such as, line width ΔH of ferromagnetic resonance (FMR), magnetic saturation induction 4$\pi$Ms, wall mobility u$\_$w/ uniaxial magnetic anisotropy energy Ku, were measured and discussed the relations between these properties. The line width ΔH decreases with increasing 4$\pi$Ms, and with decreasing Sm concentration. The anisotropy energy Ku increases not only with increasing Sm ion concentration, but also increasing 4$\pi$Ms. The value of wall mobility u$\_$w/ increase with increasing 4$\pi$Ms and decreases with increasing Sm concentration. We define a physical constant Eι from the fact that the product of 4$\pi$Ms and ΔH is constant with dimension of energy density. The Eι is dependent only on Sm concentration.density. The Eι is dependent only on Sm concentration.

• Progress in Medical Physics
• /
• v.28 no.4
• /
• pp.135-143
• /
• 2017

Chemical Exchange Saturation Transfer (CEST) imaging is a method to detect solutes based on the chemical exchange of mobile protons with water. The solute protons exchange with three different patterns, which are fast, slow, and intermediate rates. The CEST contrast can be obtained from the exchangeable protons, which are hydroxyl protons, amine protons, and amide protons. The CEST MR imaging is useful to evaluate tumors, strokes, and other diseases. The purpose of this study is to review the mathematical model for CEST imaging and for measurement of the chemical exchange rate, and to measure the chemical exchange rate using a 3T MRI system on several amino acids. We reviewed the mathematical models for the proton exchange. Several physical models are proposed to demonstrate a two-pool, three-pool, and four-pool models. The CEST signals are also evaluated by taking account of the exchange rate, pH and the saturation efficiency. Although researchers have used most commonly in the calculation of CEST asymmetry, a quantitative analysis is also developed by using Lorentzian fitting. The chemical exchange rate was measured in the phantoms made of asparagine (Asn), glutamate (Glu), ${\gamma}-aminobutyric$ acid (GABA), glycine (Gly), and myoinositol (MI). The experiment was performed at a 3T human MRI system with three different acidity conditions (pH 5.6, 6.2, and 7.4) at a concentration of 50 mM. To identify the chemical exchange rate, the "lsqcurvefit" built-in function in MATLAB was used to fit the pseudo-first exchange rate model. The pseudo-first exchange rate of Asn and Gly was increased with decreasing acidity. In the case of GABA, the largest result was observed at pH 6.2. For Glu, the results at pH 5.6 and 6.2 did not show a significant difference, and the results at pH 7.4 were almost zero. For MI, there was no significant difference at pH 5.6 or 7.4, however, the results at pH 6.2 were smaller than at the other pH values. For the experiment at 3T, we were only able to apply 1 s as the maximum saturation duration due to the limitations of the MRI system. The measurement of the chemical exchange rate was limited in a clinical 3T MRI system because of a hardware limitation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.4
• /
• pp.301-306
• /
• 1992

In order to determine the optimal conditions for the process of acetic acid fermentation, the kinetics of Acetobacter aceti fermentation in submerged batch cultures were studied at different agitation speeds and air flow rates. The maximum cell concentration was noted after about 48 hr fermentation and the time course of Acetobactey aceti fermentation showed a distinct feature of growth-associated product formation. At agitation speeds 700, 500, and 300 rpm fixed on air flow rate 1 v/v/M, specific grow rates were $3.97\times10^{-2},\;3.82\times10^{-2},\;and\;2.04\times10^{-2\} \;hr^{-1}$, saturation constants were 61.4, 64.6, and 69.4mg/ml. and volumetric oxygen transfer coefficients were 0.9337, 0.4468, and 0.1701 $min^{-1},$ respectively. At air flow rates 1.25, 1.00, and 0.75 v/v/M fixed on agitation speed 500 rpm, specific growth rates were $3.90\times10^{-2},\;3.82\times10^{-2},\;and\;2.37\times10^{-2}\;hr^{-1}$, saturation constants were 63.4, 64.6, and 64.9 mg/ml, and volumetric oxygen transfer coefficient were 0.4923, 0.4468, and 0.3509 $min^{-1},$ respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.1
• /
• pp.57-64
• /
• 2004

Effects of light and temperature on the nitrate uptake and germling growth of Enteromorpha compressa (L.) Greville (Chlorophyta) were studied based on samples from Cheongsapo near Busan, Korea. In addition, their effects on fatty acids composition in thallus were examined. Nitrate uptake showed saturation kinetics. $V_{max}$ (maximal uptake rate) and its $K_s$ (half-saturation constant) at $20^{\circ}C,\;80\;{\mu}mol\;m^{-2}s^{-1},$ white light were $1.571\;{\mu}mol{\cdot}g\;fr\;wt^{-1}{\cdot}h^{-1}$ and 3.56 ${\mu}M$, respectively. In nitrate uptake with irradiance, wavelength and temperature, its rate represented respectively the highest value as $1.405\pm0.020,\;0.623\pm0.040,\;1.422\pm0.022\;{\mu}mol{\cdot}g\;fr\;wt^{-1}{\cdot}h^{-1}\;at\;100\;{\mu}mol\;m^{-2}s^{-1},$ red light, $20^{\circ}C$ and exhibited significant difference among the examined conditions (p<0.001). Germling growth of E. compressa also showed saturation kinetics, and $V_{max}$ and its $K_s$ value at $20^{\circ}C,\;100\;{\mu}mol\;m^{-2}s^{-1},$ 12:12 h were $56.18\%\;day^{-1}$ and 0.33 ${\mu}M$, respectively. SGR (specific growth rate) recorded a maximal value as 49.33-54.80, 39.07-50.72, $47.20-54.53\%\;dat^{-1}$ at $120\;{\mu}mol\;m^{-2}s^{-1},$ blue light and $18^{\circ}C$ respectively, and showed significant difference (p<0.001). Red light made the effective nitrate uptake, but germling growth was largely limited by the light. In fatty acids analysis, PUFAs (polyunsaturated fatty acids) were high at blue light, $18^{\circ}C,\;100\;{\mu}M\;NO_3^-.$ However, irradiance did not affect the production of PUFAs. In conclusion, nitrate uptake and germling growth of E. compressa showed saturation kinetics to external nitrate concentration, and were significantly affected by irradiance, wave length and temperature. Fatty acid composition was also influenced by the factors except for irradiance. Their maximal values, together with the highest production of PUFAs, were found at blue light band, $20^{\circ}C,\;100\;{\mu}mol\;m^{-2}s^{-1},\;and\;100\;{\mu}M\;NO_3^-.$

• Journal of the Korean Geotechnical Society
• /
• v.25 no.5
• /
• pp.75-86
• /
• 2009

Salt, one of the most common soluble materials in engineering soil, may have an effect on mechanical behaviors of soils under its cementation process. In order to investigate this natural phenomenon, non-soluble material by using glass beads is mixed with salt electrolyte and cemented by using oven to evaporate water. Three different sizes of glass bead particles, 0.26, 0.5, and 1.29 mm, with different salt concentration, 0, 0.1, 0.2, 0.5, 1.0, and 2.0M, are explored by using P- and S-waves, excited by bender elements and piezo disk elemets, respectively. The velocities of the P-wave and S-wave of the particulate medium cemented by salt show three stages with the degree of saturation: 1) S-wave velocities increase while P-wave velocities reduce with degree of saturation changing from 100% to 90%; 2) Both velocities are stable with degree of saturation varying from 90% to 10%; 3) The velocities change enormously when the specimens are nearly dry with degree of saturation from 10% to 0%. Besides, the resonance frequencies of S-wave show similar stages to the S-wave velocities. This study demonstrates meaningful trends of elastic wave characteristics of geo-materials according to the cementation of dissolved salt.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.5
• /
• pp.8-15
• /
• 2016

Bioremediation, which uses microbes to degrade most organic pollutants in soil and groundwater, can be used in solving environmental issues in various polluted sites. In this research, a wind-driven bioventing system is built to degrade about 20,000 mg/kg of high concentration diesel pollutants in soil-pollution mode. The wind-driven bioventing test was proceeded by the bioaugmentation method, and the indigenous microbes used were Bacillus cereus, Achromobacter xylosoxidans, and Pseudomonas putida. The phenomenon of two-stage diesel degradation of different rates was noted in the test. In order to interpret the results of the mode test, three microbes were used to degrade diesel pollutants of same high concentration in separated aerated batch-mixing vessels. The data derived thereof was input into the Haldane equation and calculated by non-linear regression analysis and trial-and-error methods to establish the kinetic parameters of these three microbes in bioventing diesel degradation. The results show that in the derivation of μ_m (maximum specific growth rate) in biodegradation kinetics parameters, K_s (half-saturation constant) for diesel substance affinity, and K_i (inhibition coefficient) for the adaptability of high concentration diesel degradation. The K_s is the lowest in the trend of the first stage degradation of Bacillus cereus in a high diesel concentration, whereas K_i is the highest, denoting that Bacillus cereus has the best adaptability in a high diesel concentration and is the most efficient in diesel substance affinity. All three microbes have a degradation rate of over 50% with regards to Pristane and Phytane, which are branched alkanes and the most important biological markers.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.4
• /
• pp.533-539
• /
• 2020

A quantitative real-time polymerase chain reaction (QPCR) was applied to estimate biokinetic coefficients of Clostridium cadaveris and Clostridium sporogenes, which utilize protein as carbon source. Experimental data on changes in peptone concentration and 16S rRNA gene copy numbers of C. cadaveris and C. sporogenes were fitted to model. The fourth-order Runge-Kutta approximation with non-linear least squares analysis was employed to solve the ordinary differential equations to estimate biokinetic coefficients. The maximum specific growth rate (μ_max), half-saturation concentration (K_s), growth yield (Y), and decay coefficient (K_d) of C. cadaveris and C.sporogenes were 0.73 ± 0.05 and 1.35 ± 0.32 h^-1, 6.07 ± 1.52 and 5.67 ± 1.53 g/l, 2.25 ± 0.75 × 10¹⁰ and 7.92 ± 3.71 × 10⁹ copies/g, 0.002 ± 0.003 and 0.002 ± 0.001 h^-1, respectively. The theoretical specific growth rate of C. sporogenes always exceeded that of C. cadaveris at peptone concentration higher than 3.62 g/l. When the influent peptone concentration was 5.0 g/l, the concentration of C.cadaveris gradually decreased to the steady value of 2.9 × 10¹⁰ copies/ml at 4 h Hydraulic retention time (HRT), which indicates a 67.1% reduction of the initial population, but the wash out occurred at HRTs of 1.9 and 3.2 h. The 16S rRNA gene copy numbers of C. sporogenes gradually decreased to steady values ranging from 1.1 × 10¹⁰ to 2.9 × 10¹⁰ copies/ml. C. sporogenes species was predicted to wash out at an HRT of 1.6 h.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.9
• /
• pp.707-711
• /
• 2013

Carbon nanotubes(CNT) has strength and chemical stability, greatly conductivity characteristics. In particular, MWCNT (multi-walled carbon nanotubes) show rapidly resistance sensitive for changes in the ambient gas, and therefore they are ideal materials to gas sensor. So, we fabricated NOx gas sensors structured MOS-FET using MWCNT (multi-walled carbon nanotubes) material. We investigate the change resistance of NOx gas sensors based on MOS-FET with ultra lean NOx gas concentrations absorption. And NOx gas sensors show sensitivity on the change of gate-source voltage ($V_{gs}=0[V]$ or $V_{gs}=3.5[V]$). The gas sensors show the increase of sensitivity with increasing the temperature (largest value at $40^{\circ}C$). On the other hand, the sensitivity of sensors decreased with increasing of NOx gas concentration. In addition, We obtained the adsorption energy($U_a$), $U_a$ = 0.06714[eV] at the NOx gas concentration of 8[ppm], $U_a$ = 0.06769[eV] at 16[ppm], $U_a$ = 0.06847[eV] at 24[ppm] and $U_a$ = 0.06842[eV] at 32[ppm], of NOx gas molecules concentration on the MWCNT gas sensors surface with using the Arrhenius plots. As a result, the saturation phenomena is occurred by NOx gas injection of concentration for 32[ppm].

• Journal of the Korean Ceramic Society
• /
• v.13 no.1
• /
• pp.25-29
• /
• 1976

The properties vary with quality of ferric-oxide that is major material of ferrites. In this point of view, a manufacturing method of pure and homogeneous fine ferric oxide is very important. The characters of this study are as follows: 1) Ferric oxide was made from waste pickling liquor of steel. 2) The crude ferric-oxide that is made by roasting the pickling liquor was dissolved in 20% HCI solution and then produced ferric chloride is purified by ethyl ether extraction. 3) The methanol solution of purified ferric chloride was sprayed into the refractory tube with compressed air and propane gas and then ignited leading to the ferric-oxide powder. 4) The produced oxide powder was introduced to the scrubber type vessel throught cooling system in order to collect the powder. 5) Crystalline phase of the powder was identified by X-ray diffraction and particle size, crystalline shape of the powder were investigated by settling method and electron microscope and the effects of concentration of ferric chloride in methanol on grain size were discussed. Results were obtained as fellows: 1) Total impurity in the ferric oxide produced from waste pickling liquor was 3.7%. 2) The solubilityof crude ferric oxide that was made from waste pickling liquor in HCI solution increased with the HCI concentration and reached to saturation range at 15% HCI concentration. 3) Extraction of FeCl3 increased with HCI concentration which is solvent. 4) Alpha ferric oxide obtained was very fine crystalline particles, the mean crystalline grain increased with the concentration of ferric chloride, and mean grain size distributed from 3.5$\mu$(at 0.5mole/l) to 0.5$\mu$(at 0.05mole/l).