• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.1
• /
• pp.9-17
• /
• 2001

GPS is an efficient system in surveying and car navigation. but it is difficult to catch minimum number of satellite when it is hindered by obstacle such as city area. GLONASS system doesn't have perfect constellation yet, but it has many similarities with GPS system in principle of point positioning and signal system. so, it is expected to be much efficient when it is used with GPS system. For the purpose of this, the coordinates of GPS and GLONASS system, the quality of time and frequency was investigated, and the algorithm of point positioning was made. also, the efficiency of GPS/GLONASS combination was presented by analysing the precision of 3D point positioning using C/A code and Yuma satellite orbit information.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.275-279
• /
• 2004

This study was done to detect the topographic and terrain change of the vicinity of the west coast. To make the basic map of the change in topology and terrain, the mosaic images were made using the images from the satellite, which were given the geometric correction based on the GCP (Ground Control Point) and DEM (Digital Elenation Model) data. The accuracy of the images was examined by .empaling them with CCP through 1:25,000's digital map. After that, among the resultant images of the 1970s and 2000s, those of Sihwa, Hwaong and Ansan, the lands reclaimed by drainage were compared to observe the change in the area. From this study, the accuracy of the images of the west coast from satellite could be acquired and the change of the topology and terrain was detected effectively. From the results, it was known that, in case of the land the topological change was not so big due to the development in the reclaimed land or the bare land. In Sihwa, the size of the land was increased 180 $\textrm{km}^2$ and that of the seashore was decreased 110 km. in Hwaong the size was increased 50 $\textrm{km}^2$ and in Ansan the city space was increased 71 $\textrm{km}^2$ due to the formation of the industrial complex.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.277-280
• /
• 2010

There is a need to convert the old low- or medium-resolution satellite image-based thematic mapping to the high-resolution satellite image-based mapping of GSD 1m grade or lower. There is also a need to generate middle- or large-scale thematic maps of 1:5,000 or lower. In this study, the DEM and orthoimage is generated with the KOMPSAT-2 stereo image of Yuseong-gu, Daejeon Metropolitan City. By utilizing the orthoimage, automatic extraction experiments of land cover information are generated for buildings, roads and urban areas, raw land(agricultural land), mountains and forests, hydrosphere, grassland, and shadow. The experiment results show that it is possible to classify, in detail, for natural features such as the hydrosphere, mountains and forests, grassland, shadow, and raw land. While artificial features such as roads, buildings, and urban areas can be easily classified with automatic extraction, there are difficulties on detailed classifications along the boundaries. Further research should be performed on the automation methods using the conventional thematic maps and all sorts of geo-spatial information and mapping techniques in order to classify thematic information in detail.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.2
• /
• pp.239-246
• /
• 2010

Satellite image has capability of getting a broad data rapidly. It is possible that acquisition of change information about topography, land, ecosystem and urbanization etc. from multi-temporal satellite Images. In this study, the time-series change of vegetation has detected using four period Landsat Imageries. Also, NDVI was used to recognize the vitality of vegetation. Time series change of vegetation about study area was able to detect effectively by the results of classification and NDVI. It is expected that this study should be utilized as the decision making related to the effective management and plan establishment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.4
• /
• pp.405-414
• /
• 2000

A new generation of commercial satellites like IKONOS, SPOT-5 and OrbView-3,4 will have improved features, especially an higher geometric resolution with a better dynamic radiometric range. In addition high precision orbital position and attitude data will be provided by the on-board GPS receivers, IMU(Inertial Measurement Units) and star trackers. This additional information allows for reducing the number of ground control points. Furthermore this information enables direct georeferencing of imagery without ground control points. In our work mathematical models for calculating the satellite orbital parameters of SPOT-3 and KOMPSAT-1 were developed and can be easily extended to process images from other high resolution imaging systems as they become available.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.2
• /
• pp.101-110
• /
• 2000

This study focuses on examination of the availability and effectiveness about application of the differential GPS methods for navigation and acquisition of the geo-spatial information. For this, the algorithms related to a navigation solution and differential GPS were implemented in MATLAB code, a number of software simulations on test model were carried out to assess its performance, comparing the results with those obtained from the commercial software. Expecially, the results coming from tracking test on test model of the OO's WADGPS which is the commercial real-time satellite-based augmentation system via geostationary satellite (GEOs), which has been investigated with those from the above GPS methods. And also, the accuracy of absolute positioning by Navigation solution and WADGPS before and after SA-off has been compared. The above results show that DGPS methods are very reliable and efficient methods for acquisition of the geo-spatial information.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.3
• /
• pp.181-192
• /
• 2015

Bathymetry change due to the 2011 Tohoku (M9.0) earthquake was investigated through satellite altimetry-derived free-air gravity anomalies (SAFAGA) and shipborne measurements. The earthquake occurred at the plate boundaries near the northeastern coast of Japan, where the oceanic plate subducts beneath the continental plate along deep-sea trench. Data analyzed in this study include SAFAGA from Scripps Institution of Oceanography (SIO), shipborne bathymetry (SB) from the U.S. National Geophysical Data Center (NGDC) and the Japan Agency for Marine-Earth-Science And Technology (JAMSTEC). To estimate the bathymetry change, a reference bathymetry before the earthquake was predicted by gravity-geologic method (GGM) and Smith & Sandwell’s (SAS) method. In comparison with the bathymetry models before the earthquake, GGM bathymetry model generated by a tuning density contrast of 17.04 g/cm³ by downward continuation method was selected because it shows better bathymetry in the short wavelength below about 6 km. From the results, remarkable bathymetry change of about ±50 m was found on the west side of the Japan Trench caused by the earthquake.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.2
• /
• pp.55-62
• /
• 2019

The stereo geometry establishment based on the precise sensor modeling is prerequisite for accurate stereo data processing. Ground control points are generally required for the accurate sensor modeling though it is not possible over the area where the accessibility is limited or reference data is not available. For the areas, the relative orientation should be carried out to improve the geometric consistency between the stereo data though it does not improve the absolute positional accuracy. The relative orientation requires conjugate points that are well distributed over the entire image region. Therefore the automatic conjugate point extraction is required because the manual operation is labor-intensive. In this study, we applied the method consisting of the key point extraction, the search space minimization based on the epipolar line, and the rigorous outlier detection based on the RPCs (Rational Polynomial Coefficients) bias compensation modeling. We tested different parameters of window sizes for Kompsat-2 across track stereo data and analyzed the RPCs precision after the bias compensation for the cases whether the epipolar line information is used or not. The experimental results showed that matching outliers were inevitable for the different matching parameterization but they were successfully detected and removed with the rigorous method for sub-pixel level of stereo RPCs precision.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.5
• /
• pp.313-319
• /
• 2021

The national geodetic reference frame of Korea was adopted in 2003, which is referenced to ITRF (International Terrestrial Reference Frame) 2000 at the epoch of January 1, 2002. For precise positioning based on the satellites, it should be thoroughly maintained to the newest global reference frame. Other than plate tectonic motion, there are significant events or changes such as earthquakes, antenna replacement, PSD (Post-Seismic Deformation), seasonal variation etc. We processed three years of GNSS (Global Navigation Satellite System) data(60 NGII CORS stations, 51 IGS core stations) to produce daily solutions minimally constrained to ITRF. From the time series of daily solutions, the sites with unexpected discontinuity were identified to set up an event(mostly antenna replacement). The combined solution with minimum constraints was estimated along with the velocity, the offsets, and the periodic signals. The residuals show that the surrounding environment also affects the time series to a certain degree, thus it should be improved eventually. The transformation parameters to ITRF2014 were calculated with stability and consistency, which means the national geodetic reference frame is properly aligned to the global reference frame.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.4
• /
• pp.305-313
• /
• 2022

The evolution of the GNSS (Global Navigation Satellite System) technology has enhanced positioning performance in terms of positioning accuracy and time efficiency. The technology makes it possible to determine orthometric heights at a few centimeter accuracies by transforming accurate ellipsoid heights if an accurate geoid model has been employed. This study aims to generate a correction surface using GNSS/leveling co-points and a local geoid model, Thailand Geoid Model 2017 (TGM2017), through the Kriging interpolation method in a small local area. Combining the surface and TGM2017 significantly improves height transformation with the 1-cm RMSE (Root Mean Square Error) fit of 10 GNSS/leveling reference points and a mean offset of +0.1 cm. The evaluation of the correction surface at 5 GNSS/leveling checkpoints shows the RMSE of 1.0 cm, which is 82.6 percent of accuracy improvements. The GNSS leveling method can possibly be used to replace a conventional leveling technique at a few centimeter uncertainties in the case of small areas with clear-sky and high satellite visibility environments.