• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.517-531
• /
• 1999

This paper presents the development of the 2-mode variable gain high power amplifier for a transmitter of INMARSAT-M operating at L-band(1626.5-1646.5 MHz). This SSPA(Solid State Power Amplifier) is amplified 42 dBm in high power mode and 36 dBm in low power mode for INMARSAT-M. The allowable error sets +1 dBm of an upper limit and -2 dBm of a lower limit, respectively. To simplify the fabrication process, the whole system is designed by two parts composed of a driving amplifier and a high power amplifier, The HP's MGA-64135 and Motorola's MRF-6401 are used for driving amplifier, and the ERICSSON's PTE-10114 and PTF-10021 are used the high power amplifier. The SSPA was fabricated by the circuits of RF, temperature compensation and 2-mode gain control circuit in aluminum housing. The gain control method was proposed by controlling the voltage for the 2-mode. In addition, It has been experimentally verified that the gain is controlled for single tone signal as well as two tone signals. The realized SSPA has 42 dB and 36 dB for small signal gain within 20 MHz bandwidth, and the VSWR of input and output port is less than 1.5:1 The minimum value of the 1 dB compression point gets 5 dBm for 2-mode variable gain high power amplifier. A typical two tone intermodulation point has 32.5 dBc maximum which is single carrier backed off 3 dB from 1 dB compression point. The maximum output power of 43 dBm was achieved at the 1636.5 MHz. These results reveal a high power of 20 Watt, which was the design target.the design target.

• Korean Journal of Remote Sensing
• /
• v.28 no.2
• /
• pp.191-202
• /
• 2012

A high resolution satellite imagery such as KOMPSAT-2 includes a material containing rational polynomial coefficient (RPC) for three-dimensional geopositioning. However, image geometries which are calculated from the RPC must have inevitable systematic errors. Thus, it is necessary to correct systematic errors of the RPC using several ground control points (GCPs). In this paper, we propose an efficient method for automatic correction of image geometries using tie points of a stereo pair and the Shuttle Radar Topography Mission (SRTM) Digital Elevation Model (DEM) without GCPs. This method includes four steps: 1) tie points extraction, 2) determination of the ground coordinates of the tie points, 3) refinement of the ground coordinates using SRTM DEM, and 4) RPC adjustment model parameter estimation. We validates the performance of the proposed method using KOMPSAT-2 stereo pair. The root mean square errors (RMSE) achieved from check points (CPs) were about 3.55 m, 9.70 m and 3.58 m in X, Y;and Z directions. This means that we can automatically correct the systematic error of RPC using SRTM DEM.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.9
• /
• pp.17-22
• /
• 2012

Wind blown sand is expected to disrupt the operation of the railway as the presented railway project in this paper consists of large earthworks in extreme topography of the mega dune fields. For successful railway construction in sand dune area, effective mitigation measure is the most important factor to protect the track from wind blown sand. The effective mitigation measure requires an integrated consideration of the earthworks geometry and the direct control measures such as fence system. Basically there's no perfect measure protecting railway track from wind blown sand, and it would be more economical and effective to develop robust, deliberate maintenance program for track and direct control measure on the basis of geo-morphological study. The purpose of this study is to identify the large scale geo-morphological terrains and specific sand dune morphology in the project area in UAE and estimate the direction and migration rate for sand dunes with the local variations in prevailing wind directions by undertaking literature review, and aerial photographs, satellite images, and ground studies.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.847-859
• /
• 2021

Recently, as the number of high-resolution satellite SAR images increases, the demand for precise matching of SAR imagesin change detection and image fusion is consistently increasing. RMSE (Root Mean Square Error) values using GCPs (Ground Control Points) selected by analysts have been widely used for quantitative evaluation of image registration results, while it is difficult to find an approach for automatically measuring the registration accuracy. In this study, a feasibility analysis was conducted on using the FSIM (Feature Similarity) index as a measure to evaluate the registration accuracy. TerraSAR-X (TSX) staring spotlight data collected from various incidence angles and orbit directions were used for the analysis. FSIM was almost independent on the spatial resolution of the SAR image. Using a single SAR image, the FSIM with respect to registration errors was analyzed, then use it to compare with the value estimated from TSX data with different imaging geometry. FSIM index slightly decreased due to the differencesin imaging geometry such as different look angles, different orbit tracks. As the result of analyzing the FSIM value by land cover type, the change in the FSIM index according to the co-registration error was most evident in the urban area. Therefore, the FSIM index calculated in the urban was mostsuitable for determining the accuracy of image registration. It islikely that the FSIM index has sufficient potential to be used as an index for the co-registration accuracy of SAR image.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.78-90
• /
• 2021

In order to construct a precision geoid, it has been diversified into land, sea, aviation, and satellite gravity measurement methods, and measurement technology has developed, making it possible to secure high-resolution, high-precision gravity data. The construction of precision geoids can be fast and conveniently decided through GNSS surveys without separate leveling, and since 2014, the National Geographic Information Institute has been developing a hybrid geoid model to improve the accuracy of height surveying based on GNSS. In this study, the results of the GNSS height measurement were compared and analyzed choosing existing public reference points to verify the GNSS height measurement of public surveys. Experiments are conducted with GNSS height measurements and analyzed precision for public reference points on coastal, border, and mountainous terrain presented as low-precision areas or expected-to-be low-precision in research reports. To verify the GNSS height measurement, the GNSS ellipsoid height of the surrounding integrated datum to be used as a base point for the GNSS height measurement at the public datum. Based on the checked integrated datum, the GNSS ellipsoid of the public datum was calculated, and the elevation was calculated using the KNGeoid18 model and compared with the results of the direct level measurement elevation. The analysis showed that the results of GNSS height measurement at public reference points in the coastal, border, and mountainous areas were satisfied with the accuracy of public level measurement in grades 3 and 4. Through this study, GNSS level measurement can be used more efficiently than existing direct level measurements depending on the height accuracy required by users, and KNGeoids 18 can also be used in various fields such as autonomous vehicles and unmanned aerial vehicles.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.3
• /
• pp.207-215
• /
• 2022

This research has been focused on accessing precision and accuracy of UAV (Unmanned Aerial Vehicle)-derived 3-D surveying coordinates. To this end, a highly precise and accurate testing control network had been established by GNSS (Global Navigation Satellite Systems) campaign and its network adjustment. The coordinates of the ground control points and the check points were estimated within 1cm accuracy for 95% of the confidence level. FC330 camera mounted on DJI Phantom 4 repeatedly took aerial photos of an experimental area seven times, and then processed them by two widely used software packages. To evaluate the precision and accuracy of the aerial surveys, 3-D coordinates of the ten check points which automatically extracted by software were compared with GNSS solutions. For the 95% confidence level, the standard deviation of two software's result is within 1cm, 2cm, and 4cm for the north-south, east-west, and height direction, and RMSE (Root Mean Square Error) is within 9cm and 8cm for the horizontal, vertical component, respectively. The interest is that the standard deviation is much smaller than RMSE. The F-ratio test was performed to confirm the statistical difference between the two software processing results. For the standard deviation and RMSE of most positional components, exception of RMSE of the height, the null hypothesis of the one-tailed tests was rejected. It indicates that the result of UAV photogrammetry can be different statistically based on the processing software.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.2
• /
• pp.147-161
• /
• 2011

Korea is surrounded by sea on three sides. This country has been supplied with a variety of aquaculture products cultivated on shores. There have recently been a lot of studies to have better understanding of the correct location and quantity of aquaculture farms for seaweed, ear shells and fish that cover a wide area of sea. And it is necessary to use the geographic information system and remote sensing to detect the aquaculture farms in order to effectively manage them. This study uses higher resolution aerial images(25 centimeters) than satellite images of 2~2.5-meter resolution that have been ever used, to conduct an accuracy detection of aquaculture farming facilities. It chooses as the case study area the Wando region that has aquaculture farms for seaweed, ear shells and fish. Aerial photos of the island were obtained in this study and an image correction of them was conducted. A spatial database was then constructed in this study and the detection of aquaculture farming facilities was performed. An analysis of facilities inside and outside the permitted areas reveals that there has been an increase in the facilities of seaweed and ear shell aquaculture farms outside the permitted areas. And also it tells that because the facilities of fish aquaculture farms have turned into those of ear shell aquaculture farms, there has been a decrease in permitted facilities, facilities detected on the basis of aerial images, and facilities outside the permitted area. It will be necessary to continuously control and manage the unpermitted facilities, regarding the increase in the facilities inside and outside the permitted area for seaweed and ear shell aquaculture farms. Because the facilities of aquaculture farms cover a wide range of areas(sea) in this manner, it is more effective to depend on high resolution aerial images than a field survey to detect and calculate the facilities. This study comes up with a plan for using aerial images to detect the location and the quantity of the fish aquaculture facilities and then effectively manage them.

• Journal of Korea Water Resources Association
• /
• v.54 no.10
• /
• pp.835-848
• /
• 2021

In Jeju Island which has peculiarity for its geological features and hydrology system, hydrological factor analysis for the effective water management is necessary. Because in-situ hydro-meteorological data is affected by surrounding environment, the in-situ dataset could not be the spatially representative for the study area. For this reason, remote sensing data may be used to overcome the limit of the in-situ data. In this study, applicability assessment of MOD16 evapotranspiration data, Globas Land Data Assimilation System (GLDAS) based evapotranspiration/soil moisture data, and Advanced SCATterometer (ASCAT) soil moisture product which were evaluated their applicability on other study areas was conducted. In the case of evapotranspiration, comparison with total precipitation and flux-tower based evapotranspiration were conducted. And for soil moisture, 6 in-situ data and ASCAT soil moisture product were compared on each site. As a result, 57% of annual precipitation was calculated as evapotranspiration, and the correlation coefficient between MOD16 evapotranspiration and GLDAS evapotranspiration was 0.759, which was a robust value. The correlation coefficient was 0.434, indicating a relatively low fit. In the case of soil moisture, in the case of the GLDAS data, the RMSE value was less than 0.05 at all sites compared to the in-situ data, and a statistically significant result was obtained as a result of the significance test of the correlation coefficient. However, for satellite data, RMSE over than 0.05 were found at Wolgak and there was no correlation at Sehwa and Handong points. It is judged that the above results are due to insufficient quality control and spatial representation of the evapotranspiration and soil moisture sensors installed in Jeju Island. It is estimated as the error that appears when adjacent to the coast. Through this study, the necessity of improving the existing ground observation data of hydrometeorological factors is emphasized.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.2
• /
• pp.237-269
• /
• 2016

Asia-Pacific Space Cooperation Organization (APSCO) is the only intergovernmental space cooperation organization in Asia. Since its establishment to date, eight countries have signed the convention and become member states. South Korea participated actively in the preparatory phase of creating the organization, and one conference organized by AP-MCSTA which is the predecessor of APSCO was held in South Korea. However, after the APSCO Convention was opened for signature in 2005 to date, South Korea does not ratify the Convention and become a member. The rapid development of space commercialization and privatization, as well as the fastest growing commercial space market in Asia, provides opportunities for Asian countries to cooperate with each other in relevant space fields. And to participate in the existing cooperation framework (e.g., the APSCO) by the Asian space countries (e.g., South Korea) could be a proper choice. Even if the essential cooperation in particular space fields is challenging, joint space programs among different Asian countries for dealing with the common events can be initiated at the first steps. Since APSCO has learned the successful legal arrangements from ESA, the legal measures established by its Convention are believed to be qualified to ensure the achievement of benefits of different member states. For example, the regulation of the "fair return" principle confirms that the return of interests from the relevant programs is in proportion to the member's investment in the programs. Moreover, the distinguish of basic and optional activities intends to authorize the freedom of the members to choose programs to participate. And for the voting procedure, the acceptance of the "consensus" by the Council is in favor of protecting the member's interest when making decisions. However, political factors that are potential to block the participation of South Korea in APSCO are difficult to be ignored. A recent event is an announcement of deploying THAAD by South Korea, which causes tension between South Korea and China. The cooperation between these two states in space activities will be influenced. A long-standing barrier is that China acts as a non-member of the main international export control mechanism, i.e., the MTCR. The U.S takes this fact as the main reason to prevent South Korea to cooperate with China in developing space programs. Although the political factors that will block the participation of South Korea in APSCO are not easy to removed shortly, legal measures can be taken to reduce the political influence. More specifically, APSCO is recommended to ensure the achievement of commercial interests of different cooperation programs by regulating precisely the implementation of the "fair return" principle. Furthermore, APSCO is also suggested to contribute to managing the common regional events by sharing satellite data. And it is anticipated that these measures can effectively response the requirements of the rapid development of space commercialization and the increasing common needs of Asia, thereby to provide a platform for the further cooperation. In addition, in order to directly reduce the political influence, two legal measures are necessary to be taken: Firstly, to clarify the rights and responsibilities of the host state (i.e., China) as providing assistance, coordination and services to the management of the Organization to release the worries of the other member states that the host state will control the Organization's activities. And secondly, to illustrate that the cooperation in APSCO is for the non-military purpose (a narrow sense of "peaceful purpose") to reduce the political concerns. Regional cooperation in Asia regarding space affairs is considered to be a general trend in the future, so if the participation of South Korea in APSCO can be finally proved to be feasible, there will be an opportunity to discuss the creation of a comprehensive institutionalized framework for space cooperation in Asia.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_2
• /
• pp.893-906
• /
• 2020

This paper reports on the analysis of the location accuracy of a precision image generation system manufactured for CAS 500. The planned launch date of the CAS 500 is 2021, and since it has not yet been launched, the analysis was performed using KOMPSAT-3A satellite images having similar specifications to the CAS 500. In this paper, we have checked the geolocation accuracy of initial sensor model, the model point geolocation accuracy of the precise sensor model, the geolocation accuracy of the precise sensor model using the check point, and the geolocation accuracy of the precise orthoimage using 30 images of the Korean Peninsula. In this study, the target geolocation accuracy is to have an RMSE within 2 pixels when an accurate ground control point is secured. As a result, it was confirmed that the geolocation accuracy of the precision sensor model using the checkpoint was about 1.85 pixels in South Korea and about 2.04 pixels in North Korea, and the geolocation accuracy of the precise orthoimage was about 1.15 m in South Korea and about 3.23 m in North Korea. Overall, it was confirmed that the accuracy of North Korea was low compared to that of South Korea, and this was confirmed to have affected the measured accuracy because the GCP (Ground Control Point) quality of the North Korea images was poor compared to that of South Korea. In addition, it was confirmed that the accuracy of the precision orthoimage was slightly lower than that of precision sensor medel, especially in North Korea. It was judged that this occurred from the error of the DTM (Digital Terrain Model) used for orthogonal correction. In addition to the causes suggested by this paper, additional studies should be conducted on factors that may affect the position accuracy.