• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.316-320
• /
• 2004

This paper describes Ka-band antenna performance analysis of COMS satellite. The key parameters of the antenna system are optimal antenna diameter, feed horn type and horn size, F/D, and the coordinate of offset horns. The paper deals with the method to determine design core parameters of optimal antenna diameter, feed horn type and horn size, F/D, and the coordinate of offset horns, and the performances of design result.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.3
• /
• pp.391-400
• /
• 2016

In satellite operations, stable maneuvering of a satellite's onboard antenna to prevent undesirable vibrations to the satellite body is required for high-quality high-resolution images. For this reason, the onboard antenna's angular rate is typically minimized while still satisfying the system requirement that limits the speed of the onboard antenna. In this study, a simple yet effective method, called the ground station searching method, is proposed to reduce the angular rate of a satellite's onboard antenna. The performance of the proposed method is tested using real flight data from the KOMPSAT-3 satellite. Approximately 83% of arbitrarily selected real flight scenarios from 66 test cases show reductions in the onboard antenna's azimuth angular rates. Additionally, reliable solutions were consistently obtained within a reasonably acceptable computation time while generating an onboard antenna tracking profile. The obtained results indicate that the proposed method can be used in real satellite operations and can reduce the operational loads on a ground operator. Although the current work only considers the KOMPSAT-3 satellite as a test case, the proposed method can be easily modified and applied to other satellites that have similar operational characteristics.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.11
• /
• pp.1471-1476
• /
• 2018

In this paper, a high-gain antenna for satellite communication is proposed. The proposed antenna consists of septum polarizer, circular waveguide, Hat-feed structure that has a high-gain and efficiency. Especially, it is smaller and lighter than the conventional satellite communication antennas by applying a hat-feed structure. The measured results show that received gain of proposed antenna is better than 29.9 dBi and transmitted gain of proposed antenna is better than 30.5 dBi. The co-polarized and cross-polarized radiation patterns comply with ITU-RR Ap.8 and ITU-R S.731-1 that are recommended by International Telecommunication Union. The designed high-gain antenna for satellite communication is expected to be used for OTM and airborne satellite systems.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.12
• /
• pp.85-91
• /
• 2004

The land mobile antenna for two-way communication using geostationary satellite consists of a transmitting and receiving systems. The transmitting system plays the role of sending the signal to the satellite while the receiving system does the role of receiving signal from the satellite and tacking the target satellite. Especially, the land mobile antenna for satellite communication must be met with the international regulation such as antenna pattern, transmitting power and tracking error to protect the damage of the neighbor satellites. On the other hand, this paper thoroughly examined a receiving system to satisfy a stable satellite tracking performance and antenna pattern specified by the international regulation for Ku-band geostationary satellite.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.413-416
• /
• 2004

The tracking antenna system must be always pointed to a satellite for data link among moving vehicles. Especially, for an antenna mounted on a moving vehicle, it needs the stabilized the antenna system. So, software and hardware, signal processing of motion detection sensors, real-time processing of vehicle dynamics, trajectory estimation of satellite, antenna servo mechanism, and tracking algorithm, are unified in the antenna system. The purpose of this paper is to design the embedded tracking antenna control system for satellite communication. The embedded OS(Operating System) based stabilization and tracking algorithm was implemented. The performance of the designed embedded control system was verified by the real satellite communication test.

• Journal of Mechanical Science and Technology
• /
• v.19 no.spc1
• /
• pp.473-480
• /
• 2005

A three axes marine satellite antenna has been developed. As a design step, a CAD model for the antenna has been created according to the design requirements. Kinematic analyses are carried out to insure design specification and to check collision detection of the CAD model. Marine satellite antennas experience base motions, and a relevant control system should control the three antenna axis to point to the satellites accurately. A sensor fusion algorithm and a PIDA (Proportional, Integral, Derivative, Acceleration) control algorithm are designed and implemented to control the yaw, level, and cross-level angle of a small size satellite marine antenna. Antenna stabilization control experiments are performed using a test simulator which gives the antenna base motions. Experimental results show small pointing errors, which is less than 0.2 degree for the level, cross-level, and yaw axis.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.304-307
• /
• 2004

Satellite orbit determination using angles only data from single ground station is carried out. The KOMPSAT-1 satellite mono-pulse angle tracking data from 9-meter S-band antenna at KARI site in Daejeon are used for the orbit determination. Various angle tracking arcs from one-day to five-day are processed and the orbit determination results are analyzed. Antenna pointing data are predicted based on the orbit determination results to check the possibility of re-acquisition and tracking of the satellite signal. Normal satellite mission operations including orbit determination, antenna prediction, satellite re-acquisition and automatic tracking from predicted antenna angle pointing data are concluded to be possible when three-day angle tracking data from single tracking station are used for the orbit determination.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.128-128
• /
• 2000

An antenna tracking technique, referred to as "step track", is commonly used in communication applications. In this paper, an algorithm to improve the step-tracking technique for satellite tracking is proposed. We suggest a method by which the antenna scans the azimuth, detects the satellite signal without the position information, and points quickly to the direction receiving the signal of peak level. After reaching the peak level, the step-track system maintains enough signal levels to receive satellite broadcasting normally. Performance of the Tracking Algorithm proposed in this paper are verified with simulation.

• ETRI Journal
• /
• v.27 no.3
• /
• pp.243-249
• /
• 2005

A mobile antenna for multimedia communications with Ku-band geostationary satellite KOREASAT-3 and JSAT-2A is presented. The forward link of the satellite communication is 11.7 to 12.75 GHz, and the return link is 14.0 to 14.5 GHz. The mobile antenna is designed to be a stair structure using 24 active phased array elements in order to provide a low profile, and to be at a non-periodic array distance using the genetic algorithm. Also, the designed antenna uses the double beam forming method for stable satellite tracking. The fabricated mobile antenna is examined using various experiments to confirm its capability for practical application. From the measured results, the fabricated mobile antenna system is confirmed to have a good performance.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.2
• /
• pp.257-260
• /
• 2014

In this paper, a high gain waveguide array antenna combining horn antenna on slot radiator was designed. And the fabricated antenna showed enough gain, improved efficiency and broadband characteristics for receiving satellite signals, compare to conventional microstrip antenna which has dielectric loss and radiation loss on transmission line. For easy fabrication, the waveguide structure was composed by 3-stages of radiator, signal coupler and transmission line. By experiment, the array waveguide antenna of 4 by 16 showed 28.3[dBi] gain and 2:1 of VSWR. And by combining horn antenna structure, the gain was increased 1[dB]. The received signal from Koreasat 6 by measurement showed 16[dBc] of C/N on BS(Broadcasting Satellite)-band and 14[dBc] of C/N on CS(Communication Satellite)-band.