• Proceedings of the Korean Society of Crop Science Conference
• /
• 2019.09a
• /
• pp.19-19
• /
• 2019

It is necessary to maintain stable crop productions under the unsuitable environments, because the drought and flood may be frequently caused by the global warming. Therefore, it is agent to improve the crop growth model corresponded to soil moisture status. Chili pepper (Capsicum annuum) is one of the useful crop in Asia, and then it is affected by change of precipitation in consequence drought and flood occur however crop model to evaluate water stresses on chili pepper is not enough yet. In this study, development of crop model under different soil moisture status was attempted. The experiment was conducted on the slope fields in the greenhouse. The water level was kept at 20cm above the bottom of the container. Habanero (C. chinense) was used as material for crop model. Sap bleeding rate, SPAD value, chlorophyll content, stomatal conductance, leaf water potential, plant height, leaf area and shoot dry weight were measured at 10 days after treatment (DAT) and 13 DAT. Moreover, temperature and RH in the greenhouse, soil volume water contents (VWC) and soil water potential were measured. As a result, VWC showed 4.0% at the driest plot and 31.4% at the wettest plot at 13 DAT. The growth model was calculated using WVC and the growth analysis parameters. It was considered available, because its coefficient of determination showed 0.84 and there are significant relationship based on plants physiology among the parameters and the changes over time. Furthermore, we analyzed the important factors for higher accuracy prediction using multiple regression analysis.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.548-555
• /
• 2005

Since soil-structure interactions are one of the most important subjects in the structural/foundation engineering, much study concerning the soil-structure interactions had been carried out. One of typical structures related to the soil-structure interactions is the strip foundation which is basically defined as the beam or strip rested on or supported by the soils. At the present time, lack of studies on dynamic problems related to the strip foundations is still found in the literature. From these viewpoint, this paper aims to theoretically investigate dynamics of the elliptic strip foundations and also to present the practical engineering data for the design purpose. Differential equations governing the free, out-of-plane vibrations of such sap foundations we derived, in which effects of the rotatory and torsional inertias and also shear deformation are included although the warping of the cross-section is excluded. Governing differential equations subjected to the boundary conditions of free-free end constraints are numerically solved for obtaining the natural frequencies and mode shapes by using the numerical integration technique and the numerical method of non-linear equation.

• Microbiology and Biotechnology Letters
• /
• v.43 no.3
• /
• pp.241-248
• /
• 2015

Tuak is a traditional alcoholic beverage, one of the most widely known in the North Sumateran region of Indonesia. It is produced by a spontaneous fermentation process through the application of one or more several kinds of wood bark or root, called raru (Xylocorpus wood bark or a variety of forest mangosteen), into the sap water of sugar palm (Arenga pinnata) for 2−3 days. In this research, yeast that are potentially useful for ethanol production was isolated from Tuak and identified. Based on analysis of D1/D2 domain sequence of LSU (large subunit) rRNA genes, those isolated yeast strains, HT4, HT5, and HT10 were identified as Candida tropicalis. Fermentation test of these C. tropicalis isolates displayed an ability to produce 6.55% (v/v) and 4.58% ethanol at 30℃ and 42℃, respectively. These results indicated C. tropicalis isolates more rapidly utilize glucose and obtain higher levels of the production of ethanol at the higher temperature of 42℃ than S. cerevisiae, a common yeast used for bioethanol fermentation.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.6
• /
• pp.122-129
• /
• 2000

The purpose of this study is to investigate both the fundamental and some higher natural frequencies and mode shapes of compressive members resting on the linear elastic foundation. The model of compressive member is based on the classical Bernoulli-Euler beam theory. The differential equation governing free vibrations of such members subjected to an axial load is derived and solved numerically for calculating the natural frequencies and mode shapes. The Improved Euler method is used to integrate the differential equation and the Determinant Search method combined with the Regula-Falsi method to determine the natural frequencies, respectively. In numerical examples, the hinged-hinged, hinged-clamped, clamped-hinged and clamped-clamped end constraints are considered. The convergence analysis is conducted for determining the available step size in the Improved Euler method. The validation of theories developed herein is also conducted by comparing the numerical results between this study and SAP 90. The non-dimensional frequency parameters are presented as the non-dimensional system parameters: section ratio, modulus parameter and load parameter. Also typical mode shapes are presented.

• Earthquakes and Structures
• /
• v.5 no.5
• /
• pp.553-570
• /
• 2013

Using of masonry infill as partitions, in flat slab frame buildings is a common practice in many parts of the world. The infill is, generally, not considered in the design and the buildings are designed as bare frames. More of fundamental information in the effect of masomary infill on the seismic performance of RC building frames is in great demand for structural engineers. Therefore the main aim of this research is to evaluate the seismic performance of such buildings without (bare frame) and with various systems of the masonary infill. For this purpose, thirteen three dimensional models are chosen and analyzed by SAP2000 program. In this study the stress strain relation model proposed by Crisafulli for the hysteric behaviour of masonary subjected to cyclic loading is used. The results show that the nonstructural masonary infill can impart significant increase global strength and stiffness of such building frames and can enhance the seismic behaviour of flat slab frame building to large extent depending on infill wall system. As a result great deal of insight has been obtained on seismic response of such flat slab buildings which enable the structural engineer to determine the optimum position of infill wall between the columns.

• Korean Journal of Cognitive Science
• /
• v.16 no.4
• /
• pp.225-242
• /
• 2005

Consciousness dualists argue that materialism is false because of the conceivability of zombie which has no consciousness. The argument from conceivability applies to consciousness asymmetrically with $Water=H_2O$ whose identity was already established. However I think that argument is unsound because asymmetric application Is implausible. First, the metaphysical sap between water and $H_2O$ must be filled not by conceptual analysis, but by empirical methods: the neuroscientific developments will fill the metaphysical gap of consciousness. Second, consciousness dualists said it is illusion when we seem to conceive of $H_2O$ without water, but it is not illusion when we conceive the tumble with no consciousness. I argue it is also illusion in the case of latter. So two cases must be concerned equally.

• Journal of Forest and Environmental Science
• /
• v.30 no.4
• /
• pp.362-369
• /
• 2014

This study investigated physical properties and combustion gas characteristics for 8 types of wood pellets (4 domestic and 4 imported products) distributed in the domestic market. Results showed that most pellet types were first-grade pellets in the wood pellet quality standards in Korea with the exception of 3 pellet types from K company (second-grade in mechanical durability), G company (off-grade in nitrogen content) and P company (second-grade in ash percentage). Mixed pellets which contained more lignin and sap content were higher in mechanical durability (%) than that of white pellets. From the combustion gas analysis results, NOx emitted from all pellets combustion was at acceptable levels for national emission standard of the Clean Air Conservation Act except for pellets from G company. In addition, CO levels from all types of wood pellets were acceptable except for pellets from D company and domestic pellets were higher CO levels than imported pellets. These results indicate the higher CO levels in domestic pellets due to the usage of forest thinning materials including logging debris which usually had the high content of bark.

• Asia pacific journal of information systems
• /
• v.12 no.2
• /
• pp.137-162
• /
• 2002

As the ERP system become recognized as a strategic weapon of a firm, the way how to implement the system successfully has been an important issue for both practitioners and the academic community. The objective of this research is to identify the critical success factors influencing the implementation of the ERP system and to suggest the tasks to be considered first for the effective implementation of the system. The results from the analysis of data collected from the 169 firms among those which have implemented either the Oracle package or the SAP package in Korea are as follows. The important factors for the successful implementation of the ERP system include the strength of rivalry among competing firms; the degree to which information systems are matured; the information systems strategy of a firm; the support and concern from the top; and the technical openness between the ERP system and the legacy system such as network, hardware, and software. The tasks to be considered first for the effective implementation of the ERP system cover the same degree of feeling between labor and management on the threat to survive; the formulation of information systems strategy at the strategic level; CEO's strong will and resolution; the process automation and informatization of a firm; and the infrastructure including intranet and databases.

• The Korean Journal of Mycology
• /
• v.36 no.2
• /
• pp.123-129
• /
• 2008

One of the sapstain fungal species isolated from the stained sapwood of a Japanese black pine in Korea was characterized. The fungal species is tolerant to cycloheximide and has Petosum-like synnema and Sporothrix type synanamorph which are found in the anamorphs of the Ophiostoma piceae complex group. But the species could not form perithecia on MEA. Based on cultural and morphological properties and analysis of the $\beta$-tubulin gene sequence, the fungal species was identified as Ophiostoma quercus. Here, we report mycological characteristics of the anamorphic stage of Ophiostoma quercus isolated in Korea.

• Laser Solutions
• /
• v.14 no.1
• /
• pp.14-18
• /
• 2011

Semiconductor industry demands decrease in line/space dimensions of IC substrates. Particularly for IC substrates for CPU, line/space dimensions below $10{\mu}m/10{\mu}m$ are expected to be used in production since 2014. Conventional production technologies (SAP, etc.) based on photolithography are widely agreed to be reaching capability limits. To address this limitation, the embedded circuit fabrication technology using laser ablation has been recently developed. In this paper, we used a nanosecond UV laser and a picosecond UV laser to fabricate embedded circuit patterns into a buildup film with $SiO_2$ powders for IC substrate. We conducted SEM and EDS analysis to investigate surface quality of the embedded circuit patterns. Experimental results showed that due to higher recoil pressure, picosecond UV laser ablation of the buildup film generated a better surface roughness.