• The Korean Journal of Malacology
• /
• v.29 no.4
• /
• pp.291-301
• /
• 2013

This study researched and compared the sedimentation environment and photosynthetic pigments at Gomso (GS) -bay, Yoja (YJ) -bay and KangJin (KJ) -bay in May, 2012. It was shown that KJ-bay consist of C (clay) and M (mud), and GS-bay consists of Zs (silty sand) and Sz (sandy silt). Averagely, IL of YJ-bay was 4.98%, KJ-bay 6.10%, and GS-bay 1.45%. As for COD concentration, there were no places that exceeded Japanese sediment contamination standard 20 mg/g-dry. As for AVS concentration, in case of KJ-bay, two places exceeded Japanese sediment contamination standard 0.2 mg/g-dry. If we look into the average C/N ratio of bays, YJ-bay showed 8.50, KJ-bay 6.60, and GS-bay 5.52, thus all of them showed the characteristic of oceanic origin. As for the plankton make-up classified by photosynthetic pigments, diatom was dominant, and both ratios of pigment and C/chlorophyll. a showed the relatively lower distribution at GS-bay than at KJ-bay and YJ-bay. It is judged that this is related to the characteristic of flow-in, and it implies that predation process and decomposition by organic matters actively occurs at YJ-bay and KJ-bay.

• Ocean Science Journal
• /
• v.41 no.3
• /
• pp.139-148
• /
• 2006

The distribution of the taxonomical composition and the density of meiobenthos depending on the sediment type has been studied in bottom sediments of Nha Trang Bay. The maximal population density and the taxonomical diversity were observed in the silted coarse and heterogeneous sand ($1031.4{\pm}419.7\;ind.\;10\;cm^{-2}$), whereas the minimal level of density and diversity ($588.1{\pm}152.5\;ind.\;10cm^{-2}$) was in the coarse and heterogeneous sand with shell debris and corals. The correlation between the median diameter of sediment particles and population density of meiobenthos has been revealed (r=0.82, p<0.05). In bottom sediments of Nha Trang Bay, twenty six taxonomic groups of meiobenthos were observed. Nematodes dominated in all sediment types. Representatives of four orders, twenty eight families and ninety seven genera of marine nematodes were identified. The vertical distribution of meiobenthos in different sediment types was considered. A sediment column (10 cm height) was sectioned by five 2 cm portions. In the last layer (8-10 cm) the most number of meiobenthic groups was found in sandy sediments. In the lower layers of silt sediments, only nematodes were found.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.129-138
• /
• 1993

The shortage of agricultural labour due to industrial growth has greatly induced the mechanization in Korean agriculture. However small and scattered land holdings have been the main constraints in the process of mechanization. This paper describes the interrelationships of farm land structure, machinery selection and machinery operation areas. The sandy silt loam irrigated paddy land having single crop a year was selected as a target areas for this study. Machine operation cost is greatly influenced by operation period, plot geometry and operation area. On the improved geometry plots, optimal machine size increases slowly with increase in operation area. Operable area increases due to increased effective machine capacity on better geometry plot. The difference between the effects of operation period and plot geometry is that in the former case, the cost reduction is caused by delay in increase of machine size, whereas in the latter case timeliness cost is reduced by increase ffective capacity. The effect of farmland consolidation is greater on small plots than that on big plots. Increasing wage rates have induced the adoption of more labor saving machinery. Bigger labor saving machines require enlargement of operation area and larger plots through improvement in farm land structure. Machine cost on poor plot geometry increases more rapidly than that on the good plot geometry and as operation area increases machine cost reduces significantly. It is concluded that the development of agricultural mechanization ion Korea will depend on the improvement in farm land structure and enlargement of operation area.

• The Korean Journal of Quaternary Research
• /
• v.2 no.1
• /
• pp.13-24
• /
• 1988

The deposit (named Kanweoldo deposit) unconformably overlain by the Holocene tidal deposit is mainly exposed along the tidal channel of the Sajangpo tidal flat of Cheonsu Bay, west coast of Korea. The Kanweoldo deposit's sedimentary textures, sedimentary structures and erosion surfaces of the stratigraphic events have been investigated. The Kanweoldo deposit is mainly composed of mud, silt and sandy mud. The sedimentary criteria indicating intertidal deposit i.e. lenticular bedding, thinly and coarsely interlayered bedding, wavy lamination and flaser bedding are positively found in the Kanweoldo deposit. The deposit is semi-consolidated and brown in color, and has erosional contact (stratigraphic boundary) with the overlying Holocene tidal deposit. Considering such Kanweoldo deposit's sedimentary characteristics and stratigraphic relation with the Holocene tidal deposit, the Kanweoldo deposit seems to be deposited under intertidal environment during Riss-Wurm interglacial period and subaerially exposed and eroded during the last glacial period.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.5
• /
• pp.11-19
• /
• 2003

The main purpose of this study was to examine the application of the root system as a shore protection material through the measurement of the 개ot growth curve of Salix gracilisyla Miq. depending on the cutting size. As materials and methodology, nine group of cuttings were classified by the length(l0cm, 20cm, 40cm) and the diameter(0.72cmm$\pm$0,02, 0.58cm$\pm$0.02, 0.35cm$\pm$0.02), Each group was stuck to a flooding bed of sandy loam(Sand 60,36%, Silt 28%, Clay 11.64%) on 27th March 2001, After 65 growing days, the weight and length of the newly developed roots, shoots, and leaves were measured and analysed, This was repeated at 99, 129, 159, and 190 growing days. The major findings were as follows. The primary determinant of the root growth rate was on the weight of cutting, The secondary determinant was on the number of growing days. In addition, the dominant dimension of the cutting was the diameter rather than the length, The thicker cutting caused more rapid and stable growth however the longer cutting made the growth of the root slower and more unstable.

• Current Research on Agriculture and Life Sciences
• /
• v.19
• /
• pp.31-37
• /
• 2001

Uyeki(1928) classified Pinus densiflora into six ecotypes(Northeastem type, Middle-southern flat type, middle-southern upland type, Wibong type, Ankang type, and Geumgang type) based on the pine tree type. The bark color of Geumgang type was ash-brown color on the lower parts of stem and yellowed color on the upper parts of stem. We investigated the physicochemical properties of soil forests to obtain basic data for preservation of exellent pine (Pinus densiflora for. erecta Uyeki). The results were as follows; The soil texture of the Pinus densiflora for. erecta Uyeki forests were showed nearly as sandy loam, that is, sand, silt and clay were consisted of 72%, 15% and 13%, respectively. Soil acidity(pH 4.6) was lower than Korea average forest soil acidity(pH 5.2). The average contents of available phosphate was 11.7ppm at Sokwang-ri, 26.8ppm at Mt. Eungbong, 24.2ppm at Mt. Kumma. It was the lowest at Uljin(4.6ppm). The contents of carbon was 6.2% at Mt. Chungok, 6.1% at Mt. Eungbong. This value was more than average of Korea forest soil.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.394-397
• /
• 2006

Hydrogeologic and hydrochemlcat conditions of two uncontrolled landfills without reliable underlying liners, leachate collection and treatment systems were compared. With similar weather conditions, spatial distribution and temporal variations of contaminants of concern and redox parameters were different for the two landfills. These differences are highly associated with ages and hydrogeologic settings of the landfills. Groundwater flow diverges from the Cheonan landfill while it converges to downgradient area in the Wonju landfill. Less permeable clayey silt layer or silty soil in the subsurface limited dispersion of leachate plume in the former landfill but highly permeable sandy soil with good lateral extent facilitated rapid plume dispersion in the latter landfill. In addition, hydraulic properties of the cover soil played a role in the different development of redox conditions, which resulted in significantly different concentrations of nitrates. Most problematic contaminants at downgradient wells of the landfills are ammonia and nitrate.

• Geotechnical Engineering
• /
• v.8 no.2
• /
• pp.59-70
• /
• 1992

This work is to study experimentally the measurment of pore air pressure according to rainfall in colluvium model and the characteristics of pore water pressure according to increasement of artesian ground water head. After modeling a geological feature of the Tertiary formation, the experiment was performed about sixty times on three kinds of soil. This experimental results showed the variation of pore water and pore air pressures with time, the change of void ratio and appling pressure head in the nonsaturated soil. It can be also expressed by the final pore water and the air reaction ratios and then formularizing the relationship between the permeability coefficient and the void ratio. In the results of this experiment, the patterns of the pore water pressure reaction are classified by the step-type and the wave-type, and the time-lag to reach final point of pore water pressure is in order sand, sandy silt and clayey sand.

• Geomechanics and Engineering
• /
• v.25 no.1
• /
• pp.59-73
• /
• 2021

There frequently exists inadequacy regarding the number of boreholes installed along tunnel alignment. While geophysical imaging techniques are available for pre-tunnelling geological characterization, they aim to detect specific object (e.g., water body and karst cave). There remains great motivation for the industry to develop a real-time identification technology relating complex geological conditions with the existing tunnelling parameters. This study explores the potential for the use of machine learning-based data driven approaches to identify the change in geology during tunnel excavation. Further, the feasibility for machine learning-based anomaly detection approaches to detect the development of clayey clogging is also assessed. The results of an application of the machine learning-based approaches to Xi'an Metro line 4 are presented in this paper where two tunnels buried in the water-rich sandy soils at depths of 12-14 m are excavated using a 6.288 m diameter EPB shield machine. A reasonable agreement with the measurements verifies their applicability towards widening the application horizon of machine learning-based approaches.

• Geomechanics and Engineering
• /
• v.36 no.4
• /
• pp.343-353
• /
• 2024

The hydraulic anisotropic behavior of unsaturated soil has not been fully explored in relation to the grain-size distribution. The present study conducted laboratory assessments to examine the hydraulic anisotropy condition of statically compacted specimens in various initial states. The investigation incorporated the concept of hydraulic anisotropy by employing two discrete forms of soil stratification: horizontal-layering (HL) and vertical-layering (VL). The examined soils comprised sandy silt and silty sand, exhibiting either unimodal or bimodal soil-water characteristic curve (SWCC). This study aimed to investigate the potential correlation between the hydraulic anisotropy ratio and soil properties. The present study established a correlation between the hydraulic anisotropy ratio and several soil parameters, including fine content, dry density, plastic limit, and liquid limit. The study results indicate a non-linear relationship between the percentage of fine and dry density in soils with unimodal and bimodal soil-water characteristic curve (SWCC) and hydraulic anisotropy ratio.