• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.186-187
• /
• 2022

The purpose of this study was to give fluidizing properties to non-sirtered cement made using by-products that can replace Portland cement by using a fluidizing agent. Blast furnace slag, C-type fly ash, and F-type fly ash were used for non-sirtered cement, and sand was used for aggregate. The amount of fluidizing agent used was fixed at 1%, and the water-cement ratio (W/C) was different by setting the binder blending ratio of the non-sintered cement differently, and the fluidity test and flow were compared. As a result of the experiment, when the flow standard was 170mm when the fluidizing agent was used, the fluidizing properties were shown at an average water-cement ratio (W/C) of 36%. Through this study, it was confirmed that the fluidizing properties appeared when the fluidizing agent was used in non-sintered cement.

• 한국농공학회논문집
• /
• 제57권2호
• /
• pp.57-66
• /
• 2015

The purpose of this study was to improved the durability of a improved movable weir by replacing the improved movable weir's metal gate with a hybrid steel/glass fiber reinforced polymer composites panel gate. Because the metal gate of a improved movable weir is always in contact with water, its service life is shortened by corrosion. This study made four type of hybrid steel/glass fiber reinforced polymer composites panel gate with different steel gate surface deformation (control, sand blast, scratch and hole), flexural. Fracture properties tests were performed depending on the steel gate surface deformation. According to the test results, the flexural behavior, flexural strength and fracture properties of hybrid steel/glass fiber reinforced polymer composites panel gate was affected by the steel panel gate surface deformation. Also, the sand blast type hybrid steel/glass fiber reinforced polymer composites panel gate shows vastly superior flexural and fracture performance compared to other types.

• 한국지반공학회논문집
• /
• 제37권10호
• /
• pp.13-25
• /
• 2021

트라우즐 연주시험은 화약의 발파성능을 검증하기 위해서 널리 사용되는 시험방법 중 하나이다. 위력이 검증된 폭약을 연주블록의 발파공에 장약 및 전색하여 폭발시킨 후 발파공의 체적변화를 통해 화약의 위력 또는 전색효과 등을 측정하는 방법이라 할 수 있다. 본 연구에서는 발파 시 전색물에 따른 전색효과를 서로 비교하기 위하여 트라우즐 연주시험 및 3차원 고속카메라를 이용한 이미지영상상관기법을 도입하여 발파실험을 수행하였다. 실험에 사용된 폭약은 산업용 에멀젼 폭약을 적용하였고, 전색재료는 모래 및 잔골재를 사용하였다. 트라우즐 연주시험 및 수치해석을 통한 비교에서 표준사보다 잔골재 전색의 경우가 연주블록의 확장이 크게 나타났으며, 3D-DIC 시스템에서도 잔골재 전색의 경우가 모래전색보다 직경변화와 표면변형률 모두 높은 수치를 보였다.

• 화약ㆍ발파
• /
• 제41권1호
• /
• pp.1-18
• /
• 2023

전색작업은 발파공 내에서 폭발가스가 쉽게 유출되지 않게 적용되는 중요한 과정이다. 전색물질은 폭발 에너지를 더 길게 공 내부에서 작용할 수 있게 하며, 암석의 파쇄도를 증가시키는데 큰 도움이 된다. 본 연구에서는 동적 충격에 반응하는 전단농화유체 기반의 전색물질을 개발하였다. 전단농화유체 기반의 전색재료의 성능을 검증하기 위해 실 규모 발파실험 및 터널현장에 대한 현장 실증을 수행하였다. 첫 번째 실험에서는 전색재료 적용에 따른 발파공 내부의 압력을 직접 측정하였고, 도심지 터널현장 실증에서는 모래전색과 전단농화유체 기반 전색재료의 발파결과를 서로 비교하였다. 발파공 내 압력측정 결과 본 연구를 통해 개발한 전색물질을 적용한 경우, 발파공 상부에서 측정된 압력이 일반적인 모래전색을 적용한 경우보다 낮았으며 폭발가스 분출량도 적었다. 또한 현장 실증결과 터널발파에서 개발전색물질의 굴착성능이 모래전색 발파의 경우보다 우수함을 검증할 수 있었다.

• Advances in concrete construction
• /
• 제5권3호
• /
• pp.183-199
• /
• 2017

This paper reports an experimental study into the rheological behaviour of Smart Dynamic Concrete (SDC). The investigation is aimed at quantifying the effect of the varying amount of mineral admixtures on the rheology, setting time and compressive strength of SDC containing natural sand and crushed sand. Ordinary Portland cement (OPC) in conjunction with the mineral admixtures was used in different replacement ratio keeping the mix paste volume (35%) and water binder ratio (0.4) constant at controlled laboratory atmospheric temperature ($33^{\circ}C$ to $35^{\circ}C$). The results show that the properties and amount of fine aggregate have a strong influence on the admixture demand for similar initial workability, i.e., flow. The large amounts of fines and lower value of fineness modulus (FM) of natural sand primarily increases the yield stress of the SDC. The mineral admixtures at various replacement ratios strongly contribute to the yield stress and plastic viscosity of SDC due to inter particle friction and cohesion.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.667-670
• /
• 2003

The purpose of this study is to present data for the reusing, reinforcement and estimation of safety of the RC structure damaged by fire, and for the prevention of explosive spalling by checking the character of explosive spalling according to kinds of fine aggregate, admixture and water-cement ratios. The materials used fine aggregates were sea sand, crushed sand and recycled sand, and the admixtures were fly ash and blast-furnace slag. Also the water-cement ratios was 55% and 30.5%. After those were heated respectively for 30 and 60 minutes in accordance with Standard Time-Temperature Curve. And then conditions of explosive spalling were divided into five grades, and characters of explosive spalling were investigated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.755-758
• /
• 2004

Self-compactability is defined as a capability of concrete to be uniformly filled and compacted in every corners of formwork by its self-weight without vibration during placing. To evaluate the self compactability of self compacting concrete, the slump flow, the time of slump flow at 500mm and U-box apparatus testing methods are used. In this research, the fresh and hardened properties of self compacting concrete using ground granulated blast furnace slag as a part of cement were investigated for the volume contents of sand in the mortar. The workability, flowing characteristics, air content and compressive strength of concrete were tested and the results were compared with the different volume contents of sand in the mortar. In the experiment, we acquired satisfactory results at the point of flowing characteristics and strengths of self compacting concrete.

• International Journal of Concrete Structures and Materials
• /
• 제9권3호
• /
• pp.381-390
• /
• 2015

Investigating the microstructure of hardened cement mixtures with the aid of advanced technology will help the concrete industry to develop appropriate binders for durable building materials. In this paper, morphological, mineralogical and thermogravimetric analyses of autoclave-cured mixtures incorporating ground dune sand and ground granulated blast furnace slag as partial cementing materials were investigated. The microstructure analyses of hydrated products were conducted using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), differential thermal analysis (DTA), thermo-graphic analysis (TGA) and X-ray diffraction (XRD). The SEM and EDX results demonstrated the formation of thin plate-like calcium silicate hydrate plates and a compacted microstructure. The DTA and TGA analyses revealed that the calcium hydroxide generated from the hydration binder materials was consumed during the secondary pozzolanic reaction. Residual crystalline silica was observed from the XRD analysis of all of the blended mixtures, indicating the presence of excess silica. A good correlation was observed between the compressive strength of the blended mixtures and the CaO/$SiO_2$ ratio of the binder materials.

• 터널과지하공간
• /
• 제21권4호
• /
• pp.320-327
• /
• 2011

본 연구는 ○○ 석회석 광산의 화강암 폐석을 이용한 부순 모래를 전색재로 이용하기 위하여 그 현장의 주변에서 쉽게 구할 수 있는 바다 모래, 강 모래, 점토와 물의 전색재와 동일한 조건으로 모르타르 블록의 시험발파를 통해 전색효과에 대한 비교가 이루어졌다. 이때 모르타르 블록은 폭 50 cm, 길이 50 cm와 높이 70 cm로 제작하였다. 전색재료들에 대한 물리.역학적 특성을 알아보기 위하여 체가름 시험, 직접전단시험과 압출시험이 수행되었다. 모르타르 발파시험에서 전색길이 10 cm 및 20 cm에 대하여 폭발 충격압에 따른 강봉의 축방향 변형율과 전색재의 분출속도가 동적 변형율 측정기에 의해 측정되었다. 강봉의 축방향 변형율은 화강암 부순 모래가 가장 크게 나타났으며, 전색재의 분출속도는 물을 전색재로 사용하였을 때 가장 작은 값을 보이고 있다. 이 결과는 사용된 전색재의 발파 공내 다짐단위중량, 입도분포, 전단저항 및 압출시험결과와 상호 연관성을 보이고 있다. 전색재의 분출속도와 축방향 변형률은 서로 지수적으로 반비례하는 경향을 나타낸다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1212-1217
• /
• 2008

In this study, in order to clarify the effect of the direction of cyclic shear on the post-earthquake settlement the multi-directional shear tests were carried out for Toyoura Japan standard sand, Genkai natural sand and the Granulated Blast Furnace Slag (GBFS). In a series of tests, number of strain cycles was changed as n=5-200 and the shear strain amplitude varied from 0.1% to 1.0%. The relative density was also changed as Dr=50, 60 and 70%. From the test results for Toyoura sand and GBFS, it is clarified that the post cyclic settlement is relatively large at the small relative density and becomes large with the shear strain amplitude. When the influence of the direction of cyclic shear is decreases, the post cyclic settlement strain for Toyoura sand is converged to a constant value, but the GBFS is increased with the number of strain cycles.