• 한국산학기술학회논문지
• /
• 제13권4호
• /
• pp.1889-1894
• /
• 2012

바톰애쉬와 현장발생토사를 혼합한 유동성뒤채움재를 이용하여 실내모형실험을 수행하였다. 실내모형실험은 현장조건을 최대한 유사하게 모사하여 시공단계를 고려하여 실시하였다. 모형실험결과 뒤채움재 타설과정시 발생하는 최대수직변위는 4.43mm~6.6mm, 최대수평변위는 5.49mm~15.9mm로 나타났다. 하중재하시 최대 수직 변위는 2.41mm~8.69mm이고 최대 수평 변위는 3.02mm~4.25mm로 측정되었다. 하중을 제거한 후의 잔류변형은 수직방향 1.40mm~5.93mm, 수평방향 1.66mm~2.53mm로 나타났다. 동일한 크기의 하중재하시 일반모래뒤채움에 비해 유동성 뒤채움재의 수직 및 수평변위가 작게 나타났다. 유동성뒤채움의 경우 수평토압 경감효과가 크게 나타났다. 또한, 지표침하량의 경우 모래에 비해 유동성 뒤채움재에서 크게 경감되는 것으로 나타났다.

• 자원환경지질
• /
• 제51권4호
• /
• pp.371-379
• /
• 2018

많은 나라에서는 화력발전소 석탄연소 잔재물로 생산되는 석탄재를 소량의 시멘트와 혼합, 저강도 콘크리트를 만들어 지반함몰지, 폐갱도, 도로관거 뒷채움재 등으로 재활용하는 방안이 석탄재의 대규모 처리방안으로 자주 검토된다. 본 연구에서는 석탄재로 저강도콘크리트를 만들어 콘크리트 내 중금속함량 변화를 고찰하였다. 이를 위하여 시멘트만을 사용하는 경우와 시멘트의 반을 비산재로 대체하는 경우, 모래를 골재로 사용하는 경우, 그리고 회처리장의 매립재로 모래골재를 대체하는 경우에 대한 콘크리트 공시체를 제작하여 중금속농도 변화를 고찰하였다. 중금속 함량은 토양오염공정시험기준에 따라 이루어졌으며, 중금속함량에 가장 큰 영향을 주는 재료들도 평가하였다. 연구결과, 시멘트는 다른 어떤 재료들 보다 Cu, Pb, Zn에서 현격히 높은 중금속농도를 보였다. 이로 인하여 시멘트를 비산재로 대체할 경우 중금속 농도는 뚜렷이 낮아지는 경향을 보였다. 매립재는 전체적으로 비산재에 비하여 낮은 중금속농도를 보였지만, 모래보다는 높은 Cu 및 Ni농도와 낮은 Pb농도를 보였다. 전체적으로는 콘크리트 내 중금속농도는 각 재료의 혼합에 의하여 결정되는 양상을 보였다. 본 연구에서 제작된 공시체는 모든 조사된 항목에 있어 토양환경보전법이 정한 토양오염우려기준(1지역)보다 현격히 낮은 농도를 보였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권1호
• /
• pp.57-66
• /
• 2013

Although the quantity of dredged soils has increased owing to recent new harbor construction, sea course management, polluted sediment dredging, and four-river project, the reuse or recycling of those dredged soils has not done properly in Korea. To develop measures to utilize them in various ways for reuse or recycling, the biophysicochemical properties of dredged soils and sediment were assessed in this study. Samples were classified according to their sources-river and sea-by location, and as dredged soil and sediment depending on storage time. The results showed that dredged materials from the sea have high clay content and can be used for making bricks, tiles, and lightweight backfill materials, while dredged materials from the river have high sand content and can be used in sand aggregates. Separation procedures, depending on the intended application, should be carried out because all dredged materials are poorly sorted. All dredged soils and sediments have high salinity, and hence, salts should be removed before use for cultivation. Since dredged materials from the sea have adequate concentrations of nutrients, except phosphate, they can be used for creating and restoring coastal habitats without carrying out any additional removal processes. The high overall microbial activities in dredged materials from the river suggested that active degradation of organic matter, circulation of nutrients, and provision of nutrients may occur if these dredged materials are used for cultivation purpose.

• 산업기술연구
• /
• 제25권B호
• /
• pp.63-71
• /
• 2005

This paper is an experimental result of investigating lateral soil movements at piled bridge abutments by using the centrifuge model facility. Three different centrifuge model experiments, changing the methods of ground improvement at bridge abutment on the soft clayey soil (no improvement, preconsolidation and plastic board drains (PBD), sand compaction pile (SCP) + PBD), were carried out to figure out which method is the most appropriate for resisting against the lateral soil movements. In the centrifuge modelling, construction process in field was reconstructed as close as possible. Displacements of abutment model, ground movement, vertical earth pressure, cone resistance after soil improvement and distribution of water content were monitored during and after centrifuge model tests. As results of centrifuge model experiments, preconsolidation method with PBD was found to be the most effective against the lateral soil movement by analyzing results about displacements of abutment model, ground movement and cone resistance. Increase of shear strength by preconsolidation method resulted in increasing the resistance against lateral soil movement effectively although SCP could mobilize the resistance against lateral soil movement. It was also found that installment with PBD beneath the backfill of bridge abutment induced effective drainage of excess pore water pressure during the consolidation by embanking at the back of the abutment and resulted in increasing the shear strength of clay soil foundation and eventually increasing the resistance of lateral soil movement against piles of bridge abutment.

• Computers and Concrete
• /
• 제12권6호
• /
• pp.785-802
• /
• 2013

Ready-mixed soil material, known as a kind of controlled low-strength material, is a new way of soil cement combination. It can be used as backfill materials. In this paper, artificial neural network and nonlinear regression approach were applied to predict the compressive strength of ready-mixed soil material containing Portland cement, slag, sand, and soil in mixture. The data used for analyzing were obtained from our testing program. In the experiment, we carried out a mix design with three proportions of sand to soil (e.g., 6:4, 5:5, and 4:6). In addition, blast furnace slag partially replaced cement to improve workability, whereas the water-to-binder ratio was fixed. Testing was conducted on samples to estimate its engineering properties as per ASTM such as flowability, strength, and pulse velocity. Based on testing data, the empirical pulse velocity-strength correlation was established by regression method. Next, three topologies of neural network were developed to predict the strength, namely ANN-I, ANN-II, and ANN-III. The first two models are back-propagation feed-forward networks, and the other one is radial basis neural network. The results show that the compressive strength of ready-mixed soil material can be well-predicted from neural networks. Among all currently proposed neural network models, the ANN-I gives the best prediction because it is closest to the actual strength. Moreover, considering combination of pulse velocity and other factors, viz. curing time, and material contents in mixture, the proposed neural networks offer better evaluation than interpolated from pulse velocity only.

• 콘크리트학회논문집
• /
• 제12권1호
• /
• pp.113-125
• /
• 2000

The purpose of this study was to examine the durability characteristics of controlled low strength material(flowable fill) with high volume fly ash content. Flowable fill refer to self-compacted, cementitious material used primarily as a backfill in lieu of compacted fill. The two primary advantages of flowable fill over traditional methods are its ease of placement and the elimination of settlement. Therefore, in difficult compaction areas or areas where settlement is a concern, flowable fill should be considered. The fly ash used in this study met the requirements of KS L 5405 and ASTM C 618 for Class F material. The mix proportions used for flowable fill are selected to obtain low-strength materials in the 10 to 15kgf/$\textrm{cm}^2$ range. The optimized flowable fill was consisted of 60kg f/$\textrm{m}^3$ cement content, 280kgf/$\textrm{m}^3$ fly ash content, 1400kgf/$\textrm{m}^3$ sand content, and 320kgf/$\textrm{m}^3$ water content. Subsequently, durability tests including permeability, warm water immersion, repeated wetting & drying, freezing & thawing for high volume fly ash-flowable fill are conducted. The results indicated that flowable fill has acceptable durability characteristics.

• 한국지반공학회지:지반
• /
• 제4권2호
• /
• pp.25-32
• /
• 1988

본 논문에서는 뒤채움이 사질토이고 수평면인 연직벽이 수평이동변위(ATRA)를 일으킬 때 토류벽에 작용하는 정적 주동토복을 Dubrova방법과 Dubrova방법에 Chang의 개념을 도입시킨 방법 각각으로 구하였다. 이 결과를 최근에 Fang and Ishibashi가 발표한 모형실험결과와 비교분석하였다. 또한 이미 발표한 바 있는 제(1985)의 벽체 정점과 저면을 중심으로 단전하는 정적 주동토압(AT, AB)의 경우도 상기모형실험결과와 비교분석하였다. 그 결과 다음과 같은 결론을 얻었다.

• Geomechanics and Engineering
• /
• 제23권1호
• /
• pp.71-83
• /
• 2020

Cantilever sheet pile walls are subjected to surcharge loading located on the backfill soil and at different distances from the top of the wall. The response of cantilever sheet pile walls to surcharge loadings at varying distances under seismic conditions is scarce in literature. In the present study, the influence of uniform surcharge load on cantilever sheet pile wall at varying distances from the top of the wall under seismic conditions are analyzed using finite difference based computer program. The results of the numerical analysis are presented in non-dimensional form like variation of bending moment and horizontal earth pressure along the depth of the sheet pile walls. The numerical analysis has been conducted at different magnitudes of horizontal seismic acceleration coefficient and vertical seismic acceleration coefficients by varying the magnitude and position of uniform surcharge from the top of the wall for different embedded depths and types of soil. The parametric study is conducted with different embedded depth of sheet pile walls, magnitude of surcharge on the top of the wall and at a distance from the top of the wall for different angles of internal friction. It is observed that the maximum bending moment increases and more mobilization of earth pressure takes place with increase in horizontal seismic acceleration coefficients, magnitude of uniform surcharge, embedded depth and decrease in the distance of surcharge from the top of the wall in loose sand.

• 한국지반환경공학회 논문집
• /
• 제18권11호
• /
• pp.27-33
• /
• 2017

Nonlinear dynamic analysis is performed to calculate the response of U-shaped cantilever retaining structure under seismic loading using the finite element (FE) analysis program OpenSees. A particular interest of the study is to evaluate whether the moment demand in the cantilever can be accurately predicted, because it is an important component in the seismic design. The numerical model is validated against a centrifuge test that was performed on cantilever walls with dry medium dense sand in backfill. Seismic analysis is performed using the pressure-dependent, multi-yield-surface, plasticity based soil constitutive model implemented in OpenSees. Normal springs are used to simulate the soil-structure interface. Comparison with centrifuge show that FE analysis provides good estimates of both the acceleration response and bending moment. The lateral earth pressure near the bottom of the wall is overestimated in the numerical model, but this does not contribute to a higher prediction of the moment.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.482-491
• /
• 2009

In this study, the mechanical behavior of very soft ground that is reinforced on the surface has been investigated with the aid of a series of numerical analyses. Key material properties of each dredged soft ground, reinforcement and backfill sand mat have been parametrically estimated in the numerical analysis. Along with the result of the study previously performed, a series of in-situ loading conditions and settlement exerted by surface reinforcing operation by construction vehicles has been numerically simulated. These result have been used to evaluate the limit bearing capacity for the unreinforced and reinforced soft ground. Also, the results of the numerical analysis obtained in this research were compared with Yamanouchi's empirical correlation for the limit bearing capacity. Engineering charts listed in this paper for estimating the limit bearing capacity provide field engineers with preliminary design tool for surface reinforcement of very soft ground.