• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.2
• /
• pp.67-73
• /
• 1985

In Digital Terrain Model(DTM), more accurate data acquisition method is of importance. This paper has the purpose of accuracy analysis of progressive sampling method, one of data acquisition method. Especially, The following in accuracy analysis are compared and analyzed. -Comparison and analysis for position error between the digital contour lines using digital terrain model and the conventional contour lines using A-10 Plotter. -Analysis for height error of interpolation points according to application of progressive sampling method. For above numerical tests, Computer Program related to auto-carto of contour lines was made up. As a result of tests, threshold and sampling criterion have close of mutual relation to accuracy. Particularly, it was found that auto-carto of contour lines-threshold of 1.0 m and standard criterion-almost concurred in conventional contour lines.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.10 no.2
• /
• pp.49-55
• /
• 1992

Sampling techniques is very important in digital elevation model. There are scanning and digitizing method of sampling techniques. This study is limited in digitizing method. Continous sampling method use contour lines as same entity and grid method is a direct reading of sample elevation in each grid. Triangulated irregular method is needed to identity topographical lines to sample elevation data. As a results, authors know that continous sampling method has economic in input system and triangulated irregular method has a small memory size.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.9
• /
• pp.142-149
• /
• 1994

Hangul is expressed by the basic elements, twenty-four characters. Because these characters are composed of a circle and lines, Hough transform(HT), which has a powerful performance on the noise in extracting lines, is introduced. Many difficulties often occur when the original HT is used to extract strokes and it's direction, position and length from handwritten Hangul characters. Original HT has eight direction selected as samples in the transformed image should be calculated for these eight directions. In this paper, the generalized sampling rule is suggested. According to the rule, those directions which are possible to a line are the only thing to be calculated. The experoment result turned out to be higher than the method that Chen suggested in sampling rate. Anogher experiment result is done on the 1800 handwritten Hangul characters that 10 persons wrote. By feature extracting the oritinal HT and sampling HT. And as a result of six type classification, the suggested method came out higher than original HT.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.1
• /
• pp.15-21
• /
• 1998

Several adaptive and direct slicing methods have been developed to make the slice data for RP parts with better accuracy and speed. This research deals with a new adaptive slicing algorithm that shows drastic improvement in computing time for calculating the slices of a part. First, it uses less number of sampling points fur each slice in determining the thickness of the next slice. Secondly, the idea of contour map is utilized to determine the optimal sampling point on each slice. Thirdly, the calculation efficiency is further improved by introducing vertical character lines of the given part. The results in terms of accuracy and speed are compared with the existing methods.

• Journal of Biomedical Engineering Research
• /
• v.9 no.1
• /
• pp.87-92
• /
• 1988

In this paper, a new focusing method, to be called the pipelined sampled delay focusing (PSDF), is implemented. This method improves the lateral resolution in ultrasound imaging system. In PSDF, the analog belay lines are no longer necessary because sampling sum process can replace the conventional delay sum process. Also, the method offers continuous dynamic focusing on the resolution pixel basis, and eliminates the constraint that the maximum delay time is less than the sampling interval. Second order sampling is adopted in order to extend the sampling interval.

• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.130-139
• /
• 2011

In this paper, vehicle tracking algorithm using hue transformation in HIS color model is proposed. the proposed algorithm is installed on the road of the two horizontal virtual data sampling lines. The difference images are detected between the frame and the frame, respectively and also detected in the vehicle by using the hue color distribution to determine identity and lane changes. To examine the effectiveness of proposed algorithm, identification and velocity measurement for driving vehicle are evaluated. this evaluated results is shown by hue data of vehicle passing of two virtual data sample lines, and the velocity measurement for driving vehicle is less than 0.4% comparing with existing vehicle speed meter system.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.359-364
• /
• 2002

In case of pn control chart often used in mass production system of plant industry and so on, we could evaluate it's performance by the approximation to normal distribution. It has many differences according to sample sizes and defective fraction, and have disadvantage that needs much samples to use the normal distribution approximation. Existent control charts can not detect the cause of process something wrong because it is taking the sampling intervals of fixed length about all times from the process. Therefore, to overcome this shortcoming we use VSI(variable sampling intervals) techniques in this paper. This technique takes a long sampling interval to have the next sampling point if the sample point is in stable state, and if the sample point is near control lines, it takes short sampling interval because the probability to escape control limit is high. To analyze performance of pn control charts that have existent fixed sampling intervals(FSI) and that use VSI technique, we compare ATS of two charts, and analyze the performance of each control chart by the sample sizes, process fraction defective and control limits that Ryan and Schwertman had proposed.

• Journal of Korean Institute of Industrial Engineers
• /
• v.8 no.2
• /
• pp.23-31
• /
• 1982

A method of selecting parameters of Dodge-type continuous camping plans is proposed ; a sampling plan is designed so that its AFI curve passes through two designated points. AOQL contour lines are also drawn which can be used as a reference in choosing these points.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.169-172
• /
• 2002

A vision sensor measure range data using laser light source. This sensor generally use patterned laser which shaped single line. But this vision sensor cannot satisfy new trend which feeds foster and more precise processing. The sensor's sampling rate increases as reduced image processing time. However, the sampling rate can not over 30fps, because a camera has mechanical sampling limit. If we use multi line laser pattern, we will measure multi range data in one image. In the case of using same sampling rate camera, number of 2D range data profile in one second is directly proportional to laser line's number. For example, the vision sensor using 5 laser lines can sample 150 profiles per second in best condition.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1235-1238
• /
• 1987

In this paper, a new focusing method, to be called the sampled delay focusing (SDF), is proposed. This method improves the lateral resolution in ultrasound imaging system. In SDF, the analog delay lines are no longer necessary because sampling sum process can replace the conventional delay sum process. Also, this method offers continuous dynamic focusing on the resolution pixel basis if the maximum delay time is less than the sampling interval. Second order sampling is adopted in order to extend the sampling interval.