• 한국통신학회논문지
• /
• 제25권5A호
• /
• pp.743-750
• /
• 2000

본 논문에서는, 디지털 IF 다운 샘플러와 업 샘플러의 저전력 구현을 위한 블록 필터링 아키텍처를 제안한다. 소프트웨어 라디오와 같은 차세대 이동통신 방식에서 디지털 IF 다운 샘플러와 업 샘플러의 효율적인 구현방법이 더욱더 요구되어가고 있는 추세이다. 디지털 IF 다운 샘플러는 앞단에 데시메이션 필터를 수반하여 구성되며, 업 샘플러는 뒷단에 인터폴레이션 필터가 수반디어 구성된다. 본 논문의 다운 샘플러 아키텍처에서는 블록 필터링 구조가 갖는 병렬처리 구조를 이용하여 필터를 구현하였으며, 블록 필터링 아키텍처에서 구조적으로 생겨나는 업 샘플링을 직렬로 연결되는 다운 샘플러와 상쇄시킴으로서 효과적인 구조가 만들어짐을 보인다. 또한 업 샘플러 아키텍처에서는 인터폴레이션 필터의 블록 필터링에서 만들어지는 다운 샘플링이 앞단의 업 샘플러와 상쇄되어 병렬처리와 저속의 처리가 가능해짐을 보인다. 본 논문에서 제안된 아키텍처와 Polyphase 아키텍처를 비교 분석한다. 리와 저속의 처리가 가능해짐을 보인다. 본 논문에서 제안된 아키텍처와 Polyphase 아키텍처를 비교 분석한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.353-360
• /
• 2000

We developed large diameter sampler (we called KICT type large diameter sampler) to obtain undisturbed clay and sand samples. In-situ test carried out in the In-Chon international airport and Kim-Hae. Also we obtained undisturbed sample with a hydraulic piston sampler in the nearly site and carried out unconfined compression test, consolidation test and triaxial test. The result, unconfined compression strength, secant modules, preconsolidation pressure and undrained shear strength of samples to obtain KICT type large diameter sampler are larger than that of samples to obtain hydraulic piston sampler. But failure strains and volume changes at the consolidation of samples to obtain KICT type large diameter sampler are smaller than that of samples to obtain hydraulic piston sampler

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1365-1369
• /
• 2008

A large diameter sampler (KICT-type large diameter sampler) was developed to take undisturbed samples from not only soft ground but also sandy and weathered ground. The KICT-type large diameter sampler was manufactured with the principle of triple core barrel sampling. In this study, the applicability to offshore ground sampling of the KICT-type large diameter sampler was confirmed at Inchoen Port construction site. And, in order to compare the quality of samples taken by the sampler with that of the traditional piston sampler, a series of laboratory tests were performed. From the test results, the samples taken by the KICT-type large diameter sampler showed higher quality than the traditional thin-walled tube samples.

• 한국지반환경공학회 논문집
• /
• 제9권3호
• /
• pp.29-34
• /
• 2008

한국건설기술연구원(KICT)에서는 트리플 코어 바렐의 원리를 적용하여 기존의 연약지반 뿐만 아니라 사질토 및 풍화토 지대에도 적용이 기능한 대구경 샘플러를 개발하였다. 특별히 제작된 시료 절단 및 추출 장치는 다양한 종류의 채취 시료에 적용하여 시료의 교란을 최대한 방지 할 수 있도록 고안되었다. 샘플러 두부에는 적절한 강성의 스프링을 설치하여 슈(shoe)와 비트(bit) 사이의 거리가 변화하도록 하여 대상지반의 강성에 맞추어 효과적인 시료채취가 가능하도록 하였다. 대구경 샘플러의 적용성을 확인하기 위하여 일반적으로 시용되는 피스톤 샘플러와 대구 경 샘플러를 이용해 여러 대상지반에서 채취한 시료의 교란도를 비교 분석하였으며, 다양한 공학적 특성 또한 비교 분석 하였다.

• 한국지반환경공학회 논문집
• /
• 제6권3호
• /
• pp.5-15
• /
• 2005

연약지반에서 비교란 시료를 채취할 수 있는 대구경 샘플러(KICT형 샘플러)를 개발하였다. 이 대구경 샘플러로 채취한 시료와 종래의 피스톤 샘플러로 채취한 시료의 질을 평가하기 위하여 인천, 김해, 양산, 부산에서 각각의 샘플러로 시료를 채취하였으며, 실내에서 일축압축시험, 압밀시험, 삼축압축시험 및 공진주시험을 수행하였다. 그 결과, KICT형 대구경 샘플러로 채취한 시료의 일축압축강도, 할선탄성계수, 선행압밀응력, 비배수전단강도, 전단계수가 수압식 피스톤 샘플러로 채취한 시료의 그것들보다 더 크게 나타났으며, 파괴시 변형률과 압밀시 발생되는 체적변형률은 작게 나타났다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.13-15
• /
• 1999

A Josephson sampler circuit using high-Tc superconductor (HTS) ramp-edge junctions has been designed, fabricated, and experimentally tested. It consists of five ramp-edge junctions with a stacked groundplane and is based on single-flux-quantum (SFQ) operations. The sampler was used to measure current waveforms at picosecond and microampere resolutions. We are developing a system based on the sampler for measuring the current waveform in a room-temperature sample. And measuring current flowing through wiring in a semiconductor large-scale integrated circuit is a promising application for the HTS sampler system.

• Progress in Superconductivity
• /
• 제1권2호
• /
• pp.81-84
• /
• 2000

A Josephson sampler circuit using high-Tc superconductor (HTS) ramp-edge junctions has been designed, fabricated, and experimentally tested. It consists of five ramp-edge junctions with a stacked groundplane and is based on single-flux-quantum (SFQ) operations. The sampler was used to measure current waveforms at picosecond and microampere resolutions. We are developing a system based on the sampler for measuring the current waveform in a room-temperature sample. And measuring current flowing through wiring in a semiconductor large-scale integrated circuit is a promising application for the HTS sampler system.

• Environmental Engineering Research
• /
• 제18권3호
• /
• pp.123-128
• /
• 2013

The purposes of this study were to determine the efficiency of using a badge-type diffusive sampler to measure formaldehyde concentrations indoors, and to evaluate the uncertainty associated with the use of data from a diffusive sampler. A diffusive sampler using 2,4-dinitrophenylhydrazine (DNPH) reagent was found to be a suitable tool for measuring the formaldehyde concentration in an indoor environment. The agreement between results of the diffusive sampler and DNPH cartridge were good, showing a correlation coefficient of 0.996. The sampling rate for the diffusive sampler was calculated to be 1.428 L $hr^{-1}$, with a standard deviation of 0.084 L $hr^{-1}$. It was found through analysis that the uncertainty associated with the sampling rate and the mass of the formaldehyde transported into the diffusive sampler by diffusion was the dominant contributor to the total.

• 한국환경교육학회지:환경교육
• /
• 제11권2호
• /
• pp.252-261
• /
• 1998

Since 1980's during which environmental pollution became serious enough to urge various types of environmental educations in many areas. But, most emphasis has been put on theoretical education. Even field education training mostly focused on water pollution. Therefore, simple air pollution monitoring system was needed for better field education in air pollution. In this study, we evaluated Passive Sampler as an useful tool for teaching air pollution in field. Students have found passive sampler very effective tool. Recent comparative study of auto-monitoring and passive sampler networks suggested a potential use of passive sampler as an useful tool for environmental education. In this study, the correlation between two sets of values appears very high judging from the regression slope of 0.92 and correlation coefficient of 0.91 However, inexpensive Passive sampler with easy-to-operate colorimeter, has not been used in environmental education partially because large scale fluctuation in time and space characteristic to air pollution has been overlooked so that the sampler has not been tested for an effective educational tool. Passive sampler certainly deserves further in depth research as an effective air monitoring system, and better attention to its usefulness to teach students and public.

• 한국환경보건학회지
• /
• 제32권5호
• /
• pp.485-491
• /
• 2006

It is widely known that Environmental Tobacco Smoke(ETS) is not good for health. ETS is composed of a lot of chemicals. So indicators are needed to evaluate the risk of ETS in air. One of the indicators is Nicotine. Active sampler has been used to measure nicotine concentration in air. The experiments were conducted to compare the active sampler method with diffusive sampler in exposure chamber and smoking areas, respectively. Sampling rate was 40.5 ml/min in exposure chamber. Experimental sampling rate (40.5 ml/min) was more than theoretical sampling rate (33.52 ml/min). And the higher was the concentration in air, the higher was experimental sampling rate. The average desorption, rate was 113.6%. The overall precision was 7.31 %. The overall accuracy was 18.96%, which were under NIOSH criteria. The average(GM) concentrations of nicotine by two sampling methods were $8.29{\mu}g/m^{3}$ (active sampler), $7.54{\mu}/m^{3}$ (diffusive sampler) in smoking area and smoking room. There was no regression between active sampler and diffusive sampler ($R^{2}=0.2397$). But slope, coefficient of determination was 1.017, 0.9292, respectively after removing outliers. And the slope (1.017) was close to the theoretical slope (1). In conclusion, this study indicated that diffusive sampler can be used to evaluate concentration of nicotine in air instead of active sampler.