• Korean Journal of Materials Research
• /
• v.23 no.10
• /
• pp.543-549
• /
• 2013

The purpose of this paper was to investigate the effect of a high-energy milling (HEM) process on the particle morphology and the correlation between a thermal treatment and tetragonal/monoclinic nanostructured zirconia powders obtained by a precipitation process. To eliminate chloride residue ions from hydrous zirconia, a modified washing method was used. It was found that the used washing method was effective in removing the chloride from the precipitated gel. In order to investigate the effect of a pre-milling process on the particle morphology of the precipitate, dried $Zr(OH)_4$ was milled using a HEM machine with distilled water. The particle size of the $Zr(OH)_4$ powder exposed to HEM reduced to 100~150 nm, whereas that of fresh $Zr(OH)_4$ powder without a pre-milling process had a large and irregular size of 100 nm~1.5 ${\mu}m$. Additionally, modified heat treatment process was proposed to achieve nano-sized zirconia having a pure monoclinic phase. It was evident that two-step calcining process was effective in perfectly eliminating the tetragonal phase, having a small average particle of ~100 nm with good uniformity compared to the sample calcined by a single-step process, showing a large average particle size of ~300 nm with an irregular particle shape and a broad particle size distribution. The modified method is considered to be a promising process for nano-sized zirconia having a fully monoclinic phase.

• The korean journal of orthodontics
• /
• v.52 no.3
• /
• pp.201-209
• /
• 2022

Objective: To compare the removal torque of microimplants upon post-use removal and post-retention removal and to assess the influencing factors. Methods: The sample group included 241 patients (age, 30.25 ± 12.2 years) with 568 microimplants. They were divided into the post-use (microimplants removed immediately after use or treatment) and post-retention (microimplants removed during the retention period) removal groups. The removal torque in both groups was assessed according to sex, age, placement site and method, and microimplant size. Pearson correlation and multiple linear regression analyses were performed for evaluating variables influencing the removal torque. Results: The mean period of total in-bone stay of microimplants in the post-retention removal group (1,237 days) was approximately two times longer than that in the post-use removal group (656.28 days). The removal torques in the post-retention removal group (range, 4-5 N cm) were also higher than those in the post-use removal group. The mandible and pre-drilling groups demonstrated higher placement and removal torques than did the maxilla and no-drilling groups, respectively. In the no-drilling post-use removal group, the placement torque and microimplant length positively correlated with the removal torque. In the post-retention removal group, unloading in-bone stay period and microimplant diameter positively correlated with the removal torque in the no-drilling and pre-drilling methods, respectively. Conclusions: The removal torques differed according to the orthodontic loading and removal time of microimplants. With prolonged retention of microimplants inserted using the no-drilling method, the removal torque was clinically acceptable and positively correlated with the unloading in-bone stay period.

• Journal of Nutrition and Health
• /
• v.25 no.2
• /
• pp.162-178
• /
• 1992

This study evaluated the effectiveness of affected-based program in changing the nutrition attitudes and behavior of a group of low-income housewives in a urban area near industrial complex. using pre- post- and one month retention test measures of nutrition attitudes knowledge and nutrition behavior. The sample consisted of treatment group(n=58) and control group(n=68, 66 or 61) The treatment group participated in a four-week nutrition course of eight hours offered by faculty members of department of Food and Nutition in Han Nam University. At the conclusion of the program the respondents had improved nutrition attitudes increa-sed nutrition knowledge and improved dietary diversity and dietary quality scores. Nutrition attitude scores rose significnatly from the pretest to post-test for the treatment group only However this improvement was not maintained one month after education. Nutrition know-ledge score of the treatment group increased significnatly from the pretest to posttest and pretest to retention test. Nutrition behavior was measured by food practice dietary diversity and dietary quality scores, The mean food practice score dietary diversity and dietary quality scores were signifi-cantly increased from pretest to posttest for the treatment group. Only dietary diversity scores was maintained from posttest for the retention test for the treatment group. There was a good correlation between nutrition knowlege and attitude scores at the pretest. However no significant corrlation was found between nutrition knowledge and attitude scores at the posttest. At the pretest nutrition knowledge or attitude and behavior were not correlated bu there were significant correations between nutrition knowledge or attitude and behavior at the posttest. It was concluded that a four-week nutrition education program of eight hours duration for the target people can lead to ac hange in dietary behaviors as well as nutrition knowledge and attitude.

• Korean Journal of Adult Nursing
• /
• v.22 no.5
• /
• pp.537-551
• /
• 2010

Purpose: This study was designed to identify meaningful themes related to the recognition of lifestyle risk factors and barriers in seeking treatment following an acute event of first-time acute myocardial infarction. Methods: A methodological mixed method of thematic content analysis and a quantitative analysis was used. The sample consisted of 120 male patients < 65 years of age who agreed to be in the study were interviewed using a semistructured during 2008-2009. Data were analyzed according to the procedure of thematic content analysis and the meaningful themes were coded into SPSS data for quantitative analysis. Results: Pre-hospital delay greater than three hours reported by 58.3% (n=70) of the sample and similarly 63.3% had no recognition about their symptoms as cardiac in origin. The mean number of risk factors was $3.9{\pm}1.8$ out of 11 when lifestyle and psychosocial factors were included. From the interview data among the 70 patients delayed greater than three hours, thirty-five themes categorized into 12 main themes influenced the delayed decision which was identified according to personal-cognitive, socio-cultural, and contextual factors. Conclusion: Health care providers should consider these themes in designing individual interventions to make lifestyle changes and to facilitate more prompt decisions to seek care.

• The korean journal of orthodontics
• /
• v.46 no.1
• /
• pp.55-61
• /
• 2016

Skeletal anchorage-assisted upper molar distalization has become one of the standard treatment modalities for the correction of Class II malocclusion. The purpose of this study was to analyze maxillary molar movement patterns according to appliance design, with the simultaneous use of buccal fixed orthodontic appliances. The authors devised two distinct types of midpalatal miniscrew-assisted maxillary molar distalizers, a lingual arch type and a pendulum type. Fourteen patients treated with one of the two types of distalizers were enrolled in the study, and the patterns of tooth movement associated with each type were compared. Pre- and post-treatment lateral cephalograms were analyzed. The lingual arch type was associated with relatively bodily upper molar distalization, while the pendulum type was associated with distal tipping with intrusion of the upper molar. Clinicians should be aware of the expected tooth movement associated with each appliance design. Further well designed studies with larger sample sizes are required.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.5043-5047
• /
• 2013

Background: This is a part of a larger effort to characterize the effects on socio-economic factors (SEFs) on cancer outcome. Surveillance, Epidemiology and End Result (SEER) bone and joint sarcoma (BJS) data were used to identify potential disparities in cause specific survival (CSS). Materials and Methods: This study analyzed SEFs in conjunction with biologic and treatment factors. Absolute BJS specific risks were calculated and the areas under the receiver operating characteristic (ROC) curve were computed for predictors. Actuarial survival analysis was performed with Kaplan-Meier method. Kolmogorov-Smirnov's 2-sample test was used to for comparing two survival curves. Cox proportional hazard model was used for multivariate analysis. Results: There were 13501 patients diagnosed BJS from 1973 to 2009. The mean follow up time (SD) was 75.6 (90.1) months. Staging was the highest predictive factor of outcome (ROC area of 0.68). SEER stage, histology, primary site and sex were highly significant pre-treatment predictors of CSS. Under multivariate analysis, patients living in low income neighborhoods and rural areas had a 2% and 5% disadvantage in cause specific survival respectively. Conclusions: This study has found 2-5% decrement of CSS of BJS due to SEFs. These data may be used to generate testable hypothesis for future clinical trials to eliminate BJS outcome disparities.

• International Journal of Advanced Culture Technology
• /
• v.11 no.3
• /
• pp.156-162
• /
• 2023

The purpose of this study was to examine the effects of peer scaffolding on the writing fluency of English language learners. This study was intended to confirm that peer scaffolding in English as a foreign language (EFL) writing classes can improve students' English proficiency. An analysis of 20 EFL learners studying at a university in Gyeonggi Province was conducted based on the English Proficiency Test. In this study, 20 intermediate learners with similar proficiency levels were included in the sample. Randomly, 10 students were designated as members of the control group, and 10 students were designated as members of the experimental group. In the experimental group, students practiced essay writing, while a skilled student provided scaffolding for a less skilled student. A variety of tools were used to gather data, including tests, questionnaires, and interviews Statistical analyses of quantitative data were conducted using t-tests for independent samples, whereas analyses of qualitative data were conducted based on themes. Pre-test results indicated a significant value of sig. =0.87, which was higher than α = 0.05. According to the results of this study, the writing performance of both experimental and control groups of students was equal and homogeneous prior to treatment. However, there were significant differences between the writing of students in the two groups after the completion of the program. Due to the post-test analysis of the writing test, the test resulted in a sig. =0 .043, a value lower than α = 0.05. As a result, the experimental group participants showed a marked improvement in their writing abilities after treatment.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.616-626
• /
• 2018

The quality standards of solid refuse fuel (SRF) define the values for 12 physico-chemical properties, including moisture, lower heating value, and metal compounds, according to Article 20 of the Enforcement Rules of the Act on Resource Saving and Recycling Promotion. These parameters are evaluated via various SRF Quality Test Methods, but problems related to the heavy metal content have been observed in the microwave acid digestion method. Therefore, these methods and their applicability need improvement. In this study, the appropriate testing conditions were derived by varying the parameters of microwave acid digestion, such as microwave power and pre-treatment time. The pre-treatment of SRF as a function of the microwave power revealed an incomplete decomposition of the sample at 600 W, and the heavy metal content analysis was difficult to perform under 9 mL of nitric acid and 3 mL of hydrochloric acid. The experiments with the reference materials under nitric acid at 600 W lasted 30 minutes, and 1,000 W for 20 or 30 minutes were considered optimal conditions. The results confirmed that a mixture of SRF and an acid would take about 20 minutes to reach $180^{\circ}C$, requiring at least 30 minutes of pre-treatment. The accuracy was within 30% of the standard deviation, with a precision of 70 ~ 130% of the heavy metal recovery rate. By applying these conditions to SRF, the results for each condition were not significantly different and the heavy metal standards for As, Pb, Cd, and Cr were satisfied.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.2
• /
• pp.143-150
• /
• 2021

The recent spread of novel and highly variant pathogenic viruses, including the coronavirus (SARS-CoV-2), has increased the demand for diagnostic testing for rapid confirmation. This has resulted in investigating the functional capability of each space, and preparing facility guidelines to secure the safety of medical technologists. During viral evaluations, there is a requirement of negative pressure facilities along with thread separation, during pre-treatment of samples and before nucleic acid amplification. Space composition therefore needs to be planned by considering unidirectional air flow. This classification of safety management facilities is designated as biosafety level 2, and personal protective equipment is placed accordingly. In case of handling dangerous materials, they need to be carried out of the biosafety cabinet, and sterilizers are required for suitable disposal of infectious agents. A common feature of domestic laboratories is maintenance of the sample pre-treatment space at a negative pressure of -2.5 Pa or less, and arranging separate pre-treatment and reagent preparation spaces during the test process. We believe that the data generated in this study is meaningful, and offers an efficient direction and detailed flow for separation of the inspection process and space functions. Moreover, this study introduces construction of the laboratory by applying the safety management standards.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.6
• /
• pp.636-642
• /
• 2019

The purpose of this study was to examine biological activities, including total contents of polyphenol, antioxidant activities, inhibitory activities of tyrosinase, and protective effect against oxidative stress in the HepG2 cells of ethanol extracts from wheat sprout. The antioxidant activity of extracts was determined by ABTS and DPPH radical scavenging activities. Ethanol extracts were tested using different ethanol concentrations (0%, 30%, 50%, 80% and 95%, respectively). The highest amount of total polyphenol was extracted by 50% and 80% ethanol which was 26.3 and 26.8 mg gallic acid equivalents/g sample, respectively. High levels of ABTS and DPPH radical scavenging activity were found in 50% ethanol (26.7 and 15.0 mg TEAC/g sample, respectively) and 80% (24.3 and 16.1 mg TEAC/g sample, respectively) ethanol extracts. Also, 50% and 80% ethanol extracts indicated higher inhibitory activities of tyrosinase compared with other extracts. In the cell-based assay, pre-treatment of the HepG2 cells with wheat sprout extracts prevented the cell damage induced by TBHP (tert-butyl hydroperoxide). The results of this study indicate that wheat sprout has significantly higher diverse biological activities and apparently has significant health benefits.