• Journal of Environmental Health Sciences
• /
• v.25 no.3
• /
• pp.83-88
• /
• 1999

This study was carried out to examine the behavior of THM formation in water treated with chlorine dioxide where humic acid was used as THM precursor. THM was not detected in bromide-free water, but formed in water containing bromide. When 10 mg/l of chlorine dioxide was added to water containing 5 mg/l of humic acid and bromide respectively, 20.46 ${\mu}$g/l of THM was formed. It is postulated that chlorine dioxide oxidize bromide to hydrobromous acid, which subsequently reacted with humic acids similar to chlorine reaction. The formation of THM could be reduced at low pH. Among THM formed, CHBr$_3$ was the predominant species in the alkaline solution, while CHCl$_3$ in the acidic solution. A sample pretreated with chlorine dioxide for 24h before addition of chlorine showed a reduction of 75.1% in THM formation, compared with a sample not pretreated with chlorine dioxide and a sample treated by chlorine for 24h prior to addition of chlorine dioxide also showed a reduction of 37.8% in THM formation, compared with a sample not added with chlorine dioxide. It may explain that chlorine dioxide oxidizes directly a fraction of THM.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.359-364
• /
• 2002

In case of pn control chart often used in mass production system of plant industry and so on, we could evaluate it's performance by the approximation to normal distribution. It has many differences according to sample sizes and defective fraction, and have disadvantage that needs much samples to use the normal distribution approximation. Existent control charts can not detect the cause of process something wrong because it is taking the sampling intervals of fixed length about all times from the process. Therefore, to overcome this shortcoming we use VSI(variable sampling intervals) techniques in this paper. This technique takes a long sampling interval to have the next sampling point if the sample point is in stable state, and if the sample point is near control lines, it takes short sampling interval because the probability to escape control limit is high. To analyze performance of pn control charts that have existent fixed sampling intervals(FSI) and that use VSI technique, we compare ATS of two charts, and analyze the performance of each control chart by the sample sizes, process fraction defective and control limits that Ryan and Schwertman had proposed.

• Survey Research
• /
• v.9 no.3
• /
• pp.55-69
• /
• 2008

In most telephone surveys in Korea, telephone numbers are selected from the directories. Inevitably, such samples may lack representativeness due to poor coverage rate. To resolve the problem, Kang et al.(2008) implemented RDD(random digit dialing) method for nationwide sampling in Korea. The aim of this study is to compare an RDD sample with a traditional telephone quota sample that were collected independently by two survey institutes commissioned by the KBS-MBC consortium for the 2007 Presidential Election of Korea.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.311-315
• /
• 1991

The formation and transition of 2212 and 2223 phase have been studied in BPSCCO system. The 2212 phase formed in early sintering state reacts on $Ca_2PbO_4,\;Ca_2CuO_3$ and CuO during sintering process and thus produces the 2223 phase. A long sintering period is need to fabricate the superconductor with large volume fraction of 2223 phase. Also, the thin plate-like grains composed of Bi, Sr, Ca and Cu contribute to 2223 phase formation. Though the sample has lower volume fraction of 2223 phase, the critical temperature is measured highly in case of the grain grown to plate-like shape. In this work, the critical temperature of the sample sintered for 264 hr in air was measured 108 K. Microstructure of the sample was varied with condition of heat treatment after sintering process and the sample annealed with $500^{\circ}C$ for 5 hr showed excellent charateristics of 2223 phase formation.

• The Korean Journal of Applied Statistics
• /
• v.21 no.3
• /
• pp.377-385
• /
• 2008

Most of the sample surveys conducted by several statistics preparation agencies are multipurpose surveys inquiring into several distinguishing items through a single sample. In a multipurpose sample design, the stratification tends to be very complex since the stratification variables which are both multivariate and heterogeneous must be considered collectively. In this paper we point out an outlier effect in a multivariate stratification to which the K-means clustering method is applied and propose to consider outliers prior to the stratification step. We also show an empirical stratification effect under consideration of outliers through a case study of sample design for The Rural Living Indicators.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.1
• /
• pp.11-18
• /
• 2012

In this paper, an entropy constrained vector quantizer for high bit-rates is proposed. The sample-adaptive product quantizer (SAPQ), which is based on the product codebooks, is employed, and a design algorithm for the entropy constrained sample adaptive product quantizer (ECSAPQ) is proposed. The performance of the proposed ECSAPQ is better than the case of the entropy constrained vector quantizer by 0.5dB. It is also shown that the ECSAPQ distortion curve, which is based on the scalar quantizer, is lower than the high-rate theoretical curve of the entropy constrained scalar quantizer, where the theoretical curve have 1.53dB difference from Shannon's lower bound.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.7
• /
• pp.365-373
• /
• 2021

This paper investigates the presence of momentum profits in the Saudi stock market. The study applied a quantitative method by utilizing monthly closing prices of 194 listed firms on Tadawal (Saudi Stock Market). The data from January 2010 to February 2019 is taken from the Tadawal market database for analysis. The sample is further divided into two equal sub-samples based on the structural changes that occurred in the Saudi stock market. Moreover, the high- and low-value traded portfolios are also constructed to examine the presence of momentum profits. Sixteen investment strategies are formed for each sample. The results show a very strong presence of momentum profits in the Saudi stock market for the full sample as well as for the sub-samples. The momentum profits are observed for a longer investment horizon. The results confirm that the short or medium-term formation of portfolios produces negative momentum returns for high-value traded stocks. The low-value traded stocks portfolios give similar results to the full sample results in terms of momentum profits. The results suggest that an investor should keep an eye on the past performance of desired stocks for at least three-nine months in which they are willing to invest.

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.2
• /
• pp.15-19
• /
• 2009

Bulk $YBa_2Cu_3O_{7-{\delta}}$ (YBCO) superconductor was manufactured with the top-seeded melt grown method. The 9, 16, and 25 holes, as small as 0.7mm in diameter, parallel to the c-axis were mechanically drilled. Magnetic flux mapping and levitation force were measured and compared to estimate the influence of multiple holes on the magnetic properties of YBCO superconductor at 77K. According to the measurements, the maximum magnetic flux density obtained from the plain sample was 2.48kG, while the maximum magnetic flux density of the sample with 25 holes was low as around 2.29kG. The levitation force measured on the sample with 9 holes increased from 91N to 105N. The levitation force measured on the samples with 9 holes is relatively higher than the plain sample without any holes. In this case, increase of the levitation force in the perforated samples could be explained by enhancement of the cooling efficiency more effectively. We investigated that the magnetic properties of YBCO superconductor were strongly influenced by the artificial holes.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.31.3-32
• /
• 2021

We quantify the relative role of galaxy environment and bar presence on AGN triggering in face-on spiral galaxies using a volume-limited sample with 0.02 < z < 0.055, Mr < 19.5, and σ > 70 km s-1 selected from Sloan Digital Sky Survey (SDSS) Data Release 7. To separate their possible entangled effects, we divide the sample into bar and non-bar samples, and each sample is further divided into three environment cases of isolated galaxies, interacting galaxies with a pair, and cluster galaxies. The isolated case is used as a control sample. For these six cases, we measure AGN fractions at a fixed central star formation rate and central velocity dispersion, σ. We demonstrate that the internal process of the bar-induced gas inflow is more efficient in AGN triggering than the external mechanism of the galaxy interactions in groups and cluster outskirts. The significant effects of bar instability and galaxy environments are found in galaxies with a relatively less massive bulge. We conclude that from the perspective of AGN-galaxy coevolution, a massive black hole is one of the key drivers of spiral galaxy evolution. If it is not met, a bar instability helps the evolution, and in the absence of bars, galaxy interactions/mergers become important. In other words, in the presence of a massive central engine, the role of the two gas inflow mechanisms is reduced or almost disappears. We also find that bars in massive galaxies are very decisive in increasing AGN fractions when the host galaxies are inside clusters.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.3
• /
• pp.7-18
• /
• 2024

In this study, slope stability was evaluated in consideration of unsaturated soil behavior to predict landslides. Samples were collected from a landslide site due to heavy rainfall during Typhoon Hinnamnoh. Soil moisture characteristic tests were performed based on the evaporation method using a swelling undisturbed sample and a remolded sample. Based on the hydraulic-mechanical behavior, two-dimensional infiltration and stability analyses were performed. As a result, from the two sample types, it is found that both behaviors exhibited clear differences in the results, and the behavior of the swelling undisturbed sample was able to predict the actual slope failure appropriately.