• 한국진공학회지
• /
• 제19권1호
• /
• pp.10-13
• /
• 2010

본 논문은 N-face n-type GaN 표면에 산소 플라즈마 처리에 의해서 오믹전극과 접촉 저항을 낮추기 위한 연구를 하였다. 120초 산소 플라즈마 처리후 Ti (50 nm) / Al (35 nm)을 증착한 결과 오믹 전극을 구현하였으며, $1.25{\times}10^{-3}\;{\Omega}cm^2$의 접촉저항을 보였다. 이는 산소 플라즈마 처리가 기존의 플라즈마 처리와 같이 질소결원이 발생하였기 때문이다. 이를 통해 쇼트키장벽 높이(SBH)이 낮아지게 되었고, 오믹 전극및 플라즈마 처리를 안 한 경우보다 더 낮은 접촉저항의 결과를 획득하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권1호
• /
• pp.18-24
• /
• 2019

This study was carried out to investigate the effect of milling of boron (B), which is one of raw materials of $MgB_2$, on the critical current density ($J_c$) of $MgB_2$. B powder used in this study is semi-amorphous B (Pavezyum, Turkey, 97% purity, 1 micron). The size of B powder was reduced by planetary milling using $ZrO_2$ balls (a diameter of 2 mm). The B powder and balls with a ratio of 1:20 were charged in a ceramic jar and then the jar was filled with toluene. The milling time was varied from 0 to 8 h. The milled B powders were mixed with Mg powder in the composition of (Mg+2B), and the powder mixtures were uniaxially pressed at 3 tons. The powder compacts were heat-treated at $700^{\circ}C$ for 1 h in flowing argon gas. Powder X-ray diffraction and FWHM (Full width at half maximum) were used to analyze the phase formation and crystallinity of $MgB_2$. The superconducting transition temperature ($T_c$) and $J_c$ of $MgB_2$ were measured using a magnetic property measurement system (MPMS). It was found that $B_2O_3$ was formed by B milling and the subsequent drying process, and the volume fraction of $B_2O_3$ increased as milling time increased. The $T_c$ of $MgB_2$ decreased with increasing milling time, which was explained in terms of the decreased volume fraction of $MgB_2$, the line broadening of $MgB_2$ peaks and the formation of $B_2O_3$. The $J_c$ at 5 K increased with increasing milling time. The $J_c$ increase is more remarkable at the magnetic field higher than 3 T. The $J_c$ at 5 K and 4 T was the highest as $4.37{\times}10^4A/cm^2$ when milling time was 2 h. The $J_c$ at 20 K also increased with increasing milling time. However, The $J_c$ of the samples with the prolonged milling for 6 and 8 h were lower than that of the non-milled sample.

• 자원환경지질
• /
• 제9권3호
• /
• pp.157-163
• /
• 1976

In this study, the oil bearing rock-sequence, U-hand-ri Formation (D.S. Lee et al., 1976), was subdivided into three members; the lower, the intermediate and the upper. The lower consists mainly of reddish purple tuff and sandy calcareous shales, the intermediate of an alternation of tuffs, sandstons, calcareous black shales, cherts and limestone and the upper of coarse grained variegated tuff and agglomerate. Oily matter was found from the black shales of the intermediate. Ten samples of black shales from drilled cores, 8 samples of black shales from different outcrops of the member, and 1 sample of grease-like seeping oil from black shales at U-hang-ri coast were chemically analyized. Among them, 9 samples contain remarkable amount of organic carbon (0.96~1.60%) and E.O.M. extract (0.176~0.718%), and mostly the bituminous material is saturated hydrocarbons as well as shown in infared spectroscopic analyses. The elemental analyses of MAE extracts and asphaltenes of some of thoese samples indicate that the transformation of organic material to crude oil is highly progressed. The authors suggest that the seeping oil and oily tinges in black shale layers are the products of natural cracking related with the igneous activities in the area nearby.

• Progress in Superconductivity
• /
• 제13권2호
• /
• pp.117-121
• /
• 2011

We have fabricated $FeSe_x$ superconducting thin films at much different substrate temperatures of 430 and $610^{\circ}C$ on $Al_2O_3$(0001) substrates by using a pulsed laser deposition (PLD) technique. Superconducting transitions for both films were shown around 10 K, but their transition width and growth directions of grains were different. We found that superconducting tetragonal FeSe phases and non-superconducting hexagonal FeSe phases were coexisted in the sample grown at the low temperature of $430^{\circ}C$, whereas the hexagonal FeSe phase was decreased with increasing fabrication temperatures.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1994년도 제6회 학술발표회 논문개요집
• /
• pp.35-35
• /
• 1994

The surface segragation of NiZr, CuZr alloy has been studied wi th X-ray Imotoelectron spectroscopy(XPS), Auger electron spectroscopy(AES) and low energy ion scattering(LEIS). The composition of outmost atomic layer has been determinded by the use of LEIS at several incident energies using Ar+ ion. In the LEIS analysis, the effect of charge exchange has been estimated by a novel measurment of the charge exchange parameters while simul taneous determining the relative concentrations of Ni and Zr and the complementary information obtained will be described. The composition of the clean annealed surface, measured with AES only, will be contrasted wi th the surface concentration of the preferentially sputtered surface. The experimental results has been clearly demonstrated that when the NiZr ruld CuZr alloys are exposed to continuous Ar+ ion bombardment the outermost atomic layer is Zr rich due to preferential sputtering of Ni atoms. where Ni is preferentially sputtered, but the difference in sputtering yields is not sufficient to explain the observed composition. Therefore, it is necessary to consider other processes such as Radiation Induced Segregation(RIS). The surface composition of the heated sample surface predicts that Zr should surface segregate which futher supports the view that part of the Zr enrichment is due to RIS.to RIS.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.354-357
• /
• 2002

Thermally grown gate oxide on 4H-SiC wafer was investigated. The oxide layers were grown at l150$^{\circ}C$ varying the carrier gas and post activation annealing conditions. Capacitance-Voltage(C-V) characteristic curves were obtained and compared using various gate electrode such as Al, Ni and poly-Si. The interface trap density can be reduced by using post oxidation annealing process in Ar atmosphere. All of the samples which were not performed a post oxidation annealing process show negative oxide effective charge. The negative oxide effective charges may come from oxygen radical. After the post oxidation annealing, the oxygen radicals fixed and the effective oxide charge become positive. The effective oxide charge is negative even in the annealed sample when we use poly silicon gate. Poly silicon layer was dope by POCl$_3$ process. The oxide layer may be affected by P ions in poly silicon layer due to the high temperature of the POCl$_3$ doping process.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.519-522
• /
• 2002

Ag (silver) can be used for YBa$_2$Cu$_3$O$\_$7-$\delta$/(YBCO) coated conductor tape as the substrate on which YBCO can be deposited directly because of the chemical compatibility of Ag with YBCO. We have fabricated rolled Ag tapes with various total reduction ratios and different thicknesses. As-rolled Ag tape was recrystallized at 750$^{\circ}C$ for 30min in air and vacuum of 10$\^$-3/ torr. The orientation distribution functions (ODF) calculated from three x-ray pole figures of as-rolled and recrystallized tapes were analysed. As the total reduction ratio increased from 94 to 98%, the development of {110}texture of as-rolled Ag improved. Under the present experimental condition, maximum {110}ODF value of Ag tape was obtained for the sample with 94% total reduction ratio which was recrystallized at 750$^{\circ}C$ for 30min in vacuum of 10$\^$-3/ torr.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.226-229
• /
• 2005

In this study, a step-down piezoelectric transformer was fabricated to utilize as an adapter for charging batteries of mobile electronic appliances. The ceramic part of the transformer is $Pb[(Mn_{1/3}Sb_{2/3})_{0.05}Zr_{0.475}Ti_{0.475}]O_3$ with mechanical quality factor of 1600, electromechanical coupling coefficient 59 %, and piezoelectric constant d33 1300, which can be utilized as a piezoelectric transformer. A simply fabricated disk-typed test pattern of diameter 28 mm and thickness 2 mm was used to characterize resonant frequency, Qm, kp according to the different input/output electrode area. efficiency and power as a function of load resistance was also investigated. The sample APT showed some spurious mode and BPT showed better frequency property. Taking all properties which are admittance, effective electromechanical coupling coefficient and mechanical quality factor most suitable for piezoelectric transformer is BPT which has 12 mm diameter electrode and the condition of 15 Vrms, 30 $\Omega$ made the maximum efficiency of 93.7 % and maximum power is 6W with 50 Vrms.

• Elastomers and Composites
• /
• 제22권1호
• /
• pp.11-19
• /
• 1987

A coil pyrolyzer and processor-controlled gas chromatograph were used for analysis of rubber for compounding ratio of the single and blend rubber vlucanizates. Variables such as sample size, pyrolysis temperature, time allowed for pyrolysis, the column packing material, its length and programmable temperature for gas chromatography were examined to obtain optimum condition for application to NR, BR and SBR blends. By application fixed conditions, three kinds of standard curves were finally obtained from thirty samples of blend vulcanizates which were prepared in the pilot plant, NIRI. It is possible to determine rubber composition and their ratio in NR, BR and SBR products by pyrolysis.

• 한국식생활문화학회지
• /
• 제30권6호
• /
• pp.790-796
• /
• 2015

The objective of this study was to investigate the physicochemical properties and antioxidant activities of seven (A, B, C, D, E, F, G) commercial ketchups marketed in Korea. The 70% ethanol extracts were prepared and evaluated for total phenolic content, DPPH and ABTS radical scavenging activities, and metal chelating effect. pH ranged from 3.64 to 3.94, and soluble solid and reducing sugar contents of samples were 2.21~3.51oBrix and 4.78~13.45%, respectively. Salinity of samples was in the range of 1.79 to 3.21%, and sample G showed the lowest salinity. The lightness, redness, and yellowness of the Hunter color system of samples were 15.42~19.94, 18.55~23.98, and 20.87~24.34, respectively. The phenolic contents ranged from 1.37 to 2.60 mg GAE (gallic acid equivalents)/g, with samples F and G exhibiting the highest contents. Antioxidant activity determined based on DPPH and ABTS radical scavenging activities, and metal chelating effects were 45.10~90.87, 55.35~92.53, and 71.10~92.20%, respectively, at a concentration of 200 mg/mL. Samples A and G showed higher antioxidant activity than other samples. There were positive correlations between phenolic contents and antioxidant activity, suggesting that phenolic compounds are the major contributors to antioxidant activity.