• Bulletin of the Korean Chemical Society
• /
• 제28권10호
• /
• pp.1720-1724
• /
• 2007

Electrochemical behaviors of bovine hemoglobin (Hb) at an acetylene black paste electrode based on the enhancement effect of sodium dodecyl sulfate (SDS) were investigated. In the optimal conditions, a very weak reduction peak was observed at an acetylene black paste electrode for hemoglobin in the absence of SDS. However, the reduction peak current increased remarkably after the addition of 4.0 × 10?4 mol L?1 SDS, suggesting that SDS exhibits obvious enhancement effect to the determination of hemoglobin. All the experimental parameters, such as pH value, concentration of SDS, accumulation time and accumulation potential were optimized for hemoglobin analysis. The proposed method possesses high sensitivity (detection limit is 3.0 × 10?9 mol L?1), wide linearity (6.0 × 10?9 to 6.0 × 10?7 mol L?1), rapid response and low cost. Finally, the method was successfully employed to determine hemoglobin in a spiked sample.

• 한국멀티미디어학회논문지
• /
• 제23권7호
• /
• pp.830-839
• /
• 2020

As a popular mathematical framework for modeling decision making, Markov decision process (MDP) has been widely used to solve problem in many engineering fields. MDP consists of a set of discrete states, a finite set of actions, and rewards received after reaching a new state by taking action from the previous state. The objective of MDP is to find an optimal policy, that is, to find the best action to be taken in each state to maximize the expected discounted reward of policy (EDR). In practice, MDP is typically unknown, so simulation-based policy improvement (SBPI), which improves a given base policy sequentially by selecting the best action in each state depending on rewards observed via simulation, can be a practical way to find the optimal policy. However, the efficiency of SBPI is still a concern since many simulation samples are required to precisely estimate EDR for each action in each state. In this paper, we propose a method to select the best action accurately in each state using a small number of simulation samples, thereby improving the efficiency of SBPI. The proposed method accumulates the simulation samples observed in the previous states, so it is possible to precisely estimate EDR even with a small number of samples in the current state. The results of comparative experiments on the existing method demonstrate that the proposed method can improve the efficiency of SBPI.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1445-1446
• /
• 2007

In this paper, we have studied for analysis of the partial discharge(PD) signal in power transmission line. The PD signal has estimated as detected signal accumulation of a PRPDA method by using Labview, and analyzed with neural-fuzzy algorithm. With practical PD logic implementation of theoretical detected system and hardware implementation, the device for Hipotronics Company's 22.9kV or 154kV setup have generated and then have applied with 18kV,20kV with 1:1 time probe. It's also used the LDPE 0.27mmt (scratch error 0.05mmt) to sample for making PD. Our new class of PD detected algorithm have also compared with previous PRPDA or Neural Fuzzy algorithm, which has diagnose more conveniently by adding numerical values.

• 한국재료학회지
• /
• 제29권8호
• /
• pp.463-468
• /
• 2019

The electrical and interfacial properties of $HfO_2/Al_2O_3$ and $Al_2O_3/HfO_2$ dielectrics on AlN/p-Ge interface prepared by thermal atomic layer deposition are investigated by capacitance-voltage(C-V) and current-voltage(I-V) measurements. In the C-V measurements, humps related to mid-gap states are observed when the ac frequency is below 100 kHz, revealing lower mid-gap states for the $HfO_2/Al_2O_3$ sample. Higher frequency dispersion in the inversion region is observed for the $Al_2O_3/HfO_2$ sample, indicating the presence of slow interface states A higher interface trap density calculated from the high-low frequency method is observed for the $Al_2O_3/HfO_2$ sample. The parallel conductance method, applied to the accumulation region, shows border traps at 0.3~0.32 eV for the $Al_2O_3/HfO_2$ sample, which are not observed for the $Al_2O_3/HfO_2$ sample. I-V measurements show a reduction of leakage current of about three orders of magnitude for the $HfO_2/Al_2O_3$ sample. Using the Fowler-Nordheim emission, the barrier height is calculated and found to be about 1.08 eV for the $HfO_2/Al_2O_3$ sample. Based on these results, it is suggested that $HfO_2/Al_2O_3$ is a better dielectric stack than $Al_2O_3/HfO_2$ on AlN/p-Ge interface.

• Mass Spectrometry Letters
• /
• 제9권4호
• /
• pp.110-114
• /
• 2018

Since accumulation of chemicals in deciduous teeth can occur from the second trimester of fetal development to shedding, a deciduous tooth has been considered as an attractive biomatrix for estimating individual chemical exposures recently. Therefore, detection of organic chemicals from teeth has received an increasing attention in exposomics research. Most previous studies on organic chemical analysis of teeth not only focused on a few targeted chemicals but also ignored potential contaminants from an enamel surface or a dental pulp. Recently, our group started developing a multi-class organic analysis method for deciduous teeth and tried to find a proper incubation condition of tooth materials. Our results showed that incubation with methanolic HCl provided the best performance among tested.

• 한국수자원학회논문집
• /
• 제56권8호
• /
• pp.509-520
• /
• 2023

가뭄은 강수량, 토양수분 그리고 유출량 등 여러 가지 요인으로부터 영향을 받으며, 가뭄의 상황 판단을 위하여 다양한 가뭄지수가 널리 활용되고 있다. 가뭄지수의 산정에 활용되는 수문기상학적 자료와 가뭄지수 산정공식에 따라서 지수값은 달라지며, 가뭄 상황에 대한 판단에도 차이가 발생 할 수 있다. 본 연구에서는 국내외에서 널리 활용되는 표준강수지수(SPI)의 산정과정에서 결정해야 하는 강수량의 자료길이, 누적기간, 확률분포 모형, 매개변수 추정기법 등을 불확실성 영향 요인으로 가정하고, 각각의 조합에 대한 불확실성을 평균제곱근오차와 선형혼합모형(LMM)을 활용하여 평가하였다. 평균제곱오차는 SPI 산정과정에 발생되는 전반적인 오차를 추정하며, LMM은 영향 요인들의 상대적인 불확설성을 평가하는데 활용되었다. 그 결과, SPI 산정에 활용된 자료의 기간과 누적기간이 길어질수록 평균제곱오차가 감소하였다. LMM을 통하여 불확실성 영향요인들의 기여도를 비교한 결과, SPI의 불확실성에는 자료기간의 영향이 가장 크게 나타났다. 또한, 자료기간이 증가하면, 자료기간에 의한 불확실성은 감소하고 누적기간과 매개변수 추정기법에 의한 불확실성이 상대적으로 증가하였다. 본 연구 결과, SPI 산정과정에서 발생되는 불확실성을 줄이기 위해서는 장기간의 자료 확보가 우선이며, 자료의 특성을 적절히 반영하는 확률분포모형과 매개변수 추정기법이 적용되어야 한다.

• 한국도로학회논문집
• /
• 제16권3호
• /
• pp.119-129
• /
• 2014

PURPOSES : This investigational survey is to observe a proper spatial aggregation method for path travel time estimation using the hi-pass DSRC system. METHODS : The links which connect the nodes of section detectors location are used for path travel time estimation traditionally. It makes some problem such as increasing accumulation errors and processing times. In this background, the new links composition methods for spatial aggregation are considered by using some types of nodes as IC, JC, RSE combination. Path travel times estimated by new aggregation methods are compared with PBM travel times by MAE, MAPE and statistical hypothesis tests. RESULTS : The results of minimum sample size and missing rate for 5 minutes aggregation interval are satisfied except for JC link path travel time in Seoul TG~Kuemho JC. Thus, it was additionally observed for minimum sample size satisfaction. In 15, 30 minutes and 1 hour aggregation intervals, all conditions are satisfied by the minimum sample size criteria. For accuracy test and statistical hypothesis test, it has been proved that RSE, Conzone, IC, JC links have equivalent errors and statistical characteristics. CONCLUSIONS : There are some errors between the PBM and the LBM methods that come from dropping vehicles by rest areas. Consequently, this survey result means each of links compositions are available for the estimation of path travel time when PBM vehicles are missed.

• Journal of Radiation Protection and Research
• /
• 제46권3호
• /
• pp.127-133
• /
• 2021

Background: Phosphogypsum is material produced as a byproduct in fertilizer industry and is generally used for building materials. This material may contain enhanced radium-226 (²²⁶Ra) activity concentration compared to its natural concentration that may lead to indoor radon accumulation. Therefore, an accurate measurement method is proposed in this study to determine ²²⁶Ra activity concentration in phosphogypsum sample, considering the potential radon leakage from the sample container. Materials and Methods: The International Atomic Energy Agency (IAEA) phosphogypsum reference material was used as a sample in this study. High-purity germanium (HPGe) gamma spectrometry was used to measure the activity concentration of the ²²⁶Ra decay products, i.e., ²¹⁴Bi and ²¹⁴Pb. Marinelli beakers sealed with three different sealing methods were used as sample containers. Due to the potential leakage of radon from the Marinelli beaker (MB), correction to the activity concentration resulted in gamma spectrometry is needed. Therefore, the leaked fraction of radon escaped from the sample container was calculated and added to the gamma spectrometry measured values. Results and Discussion: Total activity concentration of ²²⁶Ra was determined by summing up the activity concentration from gamma spectrometry measurement and calculated concentration from radon leakage correction method. The results obtained from ²¹⁴Bi peak were 723.4 ± 4.0 Bq·kg^-1 in MB1 and 719.2 ± 3.5 Bq·kg^-1 in MB2 that showed about 5% discrepancy compared to the certified activity. Besides, results obtained from ²¹⁴Pb peak were 741.9 ± 3.6 Bq·kg^-1 in MB1 and 740.1 ± 3.4 Bq·kg^-1 in MB2 that showed about 2% difference compared to the certified activity measurement of ²²⁶Ra concentration activity. Conclusion: The results show that radon leakage correction was calculated with insignificant discrepancy to the certified values and provided improvement to the gamma spectrometry. Therefore, measuring ²²⁶Ra activity concentration in TENORM (technologically enhanced naturally occurring radioactive material) sample using radon leakage correction can be concluded as a convenient and accurate method that can be easily conducted with simple calculation.

• 한국기계가공학회지
• /
• 제21권8호
• /
• pp.66-71
• /
• 2022

Metal additive manufacturing (AM) has revolutionized several manufacturing industries. AM can generate large-scale metal components and produce complex geometries close to net-shapes. WAAM is an AM technology that has garnered considerable interest among industries owing to its economics and relatively high deposition rates. However, the heat accumulation in the weld bead during deposition triggers distortion and residual stress. To address these problems, various methods of interpass pressure rolling systems have been suggested in recent research. In addition, combining the rolling and WAAM processes can mitigate residual stresses. The constant-pressure rolling of the interlayer also affect the microstructure. The coarse microstructure of the as-deposited sample was altered to finer equiaxed grains via these methods. However, the bead-shape accuracy of the interlayer constant-pressure method does not consider the heat accumulation in each layer. Therefore, this study develops an interpass variable pressure rolling system that considers the heat accumulation of each layer. The interpass variable pressure rolling system comprises deposition, detection, pressure, and transport units. Finally, verification tests are performed on the interpass variable-pressure rolling system (at 500 kg) with the WAAM process, and the obtained results are discussed.

• 한국과학교육학회지
• /
• 제15권3호
• /
• pp.349-362
• /
• 1995

As science programs emphasize an understanding of the nature of science, it is needed to assess students' views on a wide range of science-technology-society topics. The purpose of this study is to investigate the views of high school students about some selected topics of the epistemology of science. The selected topics include the meaning of science, scientific assumptions, values in science, conceptual inventions in science, scientific method, consensus making in science, and characteristics of the knowledge produced in science. Identified preconceptions in the study are as follows: Science was seen as improving the world(20%), and technology was defined as the application of science(35%). Almost half of the sample(49%) subscribed to a view consistent with a creationist posture and large group of students(46%) expressed a purely ontological view. Only minority of the students(5%) discounted the role played by private science values, but one half of the sample denied the fact that gender-related values can influence the knowledge that scientist construct(53%). Only a small potion of the sample(5%) held a view contrasting to contemporary epistemology of science, but the majority(67%) expressed a simplistic hierarchical relationship in which hypotheses become theories and theories become laws. One third of the students(33%) held a preconception that the scientific method composed of questioning, hypothesizing, collecting data, and concluding. Students did not appreciate the role of consensus making in science(33%). An out-dated epistemic perspective describes the progress of science as simply an accumulation of knowledge(4%). In general, it was concluded that most high school students did not hold efficient understanding on the nature of science. It can be said that no adequate and consistent instruction took place to provide students with an authentic view of the nature of science.